VoIP Mailing List Archives

[willbelair at yahoo.com]

Hi,
I have successfully installed and configured the FS thanks to the community help. Greatly appreciate all.
Now I have some basic error:

I can dial out from extension 1000 (all default ext) to any number not in the same network. I got the other number rung, and answered, but cannot hear anything from both ends. Strange thing is I can broadcast an audio into the conversation, and both ends can hear the audio, but just cannot talk.

I just hope that it would be something easy to be pointed out by experienced users.

Thank you,

Will

[brian at freeswitch.org]

did you check our firewall? and various nat settings?

/b

On Jan 15, 2009, at 3:42 PM, Will Smith wrote:

[willbelair at yahoo.com]

Thank you so much for responding.
Yes, I checked those, everything looks fine, and infact, if the audio stream is blocked by firewall or nat setting, how can I inject the audio file and hear it played on both ends. But as you suggest, I will doublecheck those values.
Thanks again

--- On Thu, 1/15/09, Brian West <brian@freeswitch.org> wrote:

[willbelair at yahoo.com]

I found this:
When I call the outside number, first, cannot hear or be heard, then when I put the line on hold, the other party can hear the MOH, and when I switch it back, now we can talk. Something goes wrong here



--- On Thu, 1/15/09, Brian West <brian@freeswitch.org> wrote: