VoIP Mailing List Archives

[jim at archer.net]

Hi All...

I installed FS trunk a few days ago on a Debian Etch AMD64 machine. I
configured two Polycom 501 phones to talk to it. From each phone, I can
dial extension 9999 to get the MOH and 5000 to get the sample IVR. But, I
can not call one phone from the other. One is extension 1000 and the other
is 1001.

I checked and the sample XML files are there in
/usr/local/freeswitch/conf/directory/default

It seems that as soon as I dial the second digit, the phone decides it is
done waiting for me to dial any more, so it tried to connect me to
extension 10. Here is what FS spits on to the console:

2009-01-26 18:10:35 [NOTICE] switch_channel.c:566 switch_channel_set_name()
New Channel sofia/internal/1001@72.46.5.252
[898cf87c-ebfe-11dd-a8c8-b7a3de0bf1ff]
2009-01-26 18:10:35 [INFO] mod_dialplan_xml.c:233 dialplan_hunt()
Processing FS->10 in context default
2009-01-26 18:10:35 [NOTICE] switch_ivr.c:1253
switch_ivr_session_transfer() Transfer sofia/internal/1001@72.46.5.252 to
enum[10@default]
2009-01-26 18:10:36 [INFO] switch_core_state_machine.c:122
switch_core_standard_on_routing() No Route, Aborting
2009-01-26 18:10:36 [NOTICE] switch_core_state_machine.c:123
switch_core_standard_on_routing() Hangup sofia/internal/1001@72.46.5.252
[CS_ROUTING] [NO_ROUTE_DESTINATION]
2009-01-26 18:10:36 [NOTICE] switch_core_session.c:960
switch_core_session_thread() Session 25 (sofia/internal/1001@72.46.5.252)
Ended
2009-01-26 18:10:36 [NOTICE] switch_core_session.c:962
switch_core_session_thread() Close Channel sofia/internal/1001@72.46.5.252
[CS_HANGUP]

Any suggestions would be appreciated, thanks!

Jim


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

[msc at freeswitch.org]

Sounds like the Polycoms are expecting only two digits when you start
with a 1. Have these phones been used before? Perhaps you could reset
one of them to the factory default and start from scratch and see what
happens.
-MC

On Mon, Jan 26, 2009 at 3:16 PM, Jim Archer <jim@archer.net> wrote:

[brian at freeswitch.org]

You'll need to fix your dialplan in the polycom itself its sending the
invite after you dial 10.

/b

On Jan 26, 2009, at 5:16 PM, Jim Archer wrote: