VoIP Mailing List Archives

[blansky at interwise.com]

What way should I configure Freeswitch to get out all the outbound calls through a specific proxy server?

Regards,

Boris Lansky
Unified Communications Telephony Team
AT&T Unified Communications
Phone: +972.3.976.7604
Fax: +972.3.976.7712
blansky@interwise.com (Simon.shaw@att.com)

[msc at freeswitch.org]

Could you add some detail to this question? I think we could give a
more intelligent answer if we had a better idea of what you are hoping
to accomplish. I'm sure the FS community will have some thoughts for
you.
-MC

On Wed, Jan 28, 2009 at 5:41 AM, Boris Lansky <blansky@interwise.com> wrote:

[mike at jerris.com]

http://lists.freeswitch.org/pipermail/freeswitch-users/2009-January/010725.html
On Jan 28, 2009, at 8:41 AM, Boris Lansky wrote:

[blansky at interwise.com]

Hi Michael,
What I would like to achieve is that Freeswitch will send all its SIP
messages to call terminator through a specific Proxy server. From what I
know I can cause it to do it by including "Path" header in a User Agent
REGISTER message but I would like the FS to behave such way
"automatically" due to its configuration. So how looks such a
configuration I would like to know.

Regards,

Boris Lansky
Unified Communications Telephony Team
AT&T Unified Communications
Phone: +972.3.976.7604
Fax: +972.3.976.7712
blansky@interwise.com


-----Original Message-----
From: freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of
Michael Collins
Sent: Wednesday, January 28, 2009 7:34 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Outbound Proxy configuration

Could you add some detail to this question? I think we could give a
more intelligent answer if we had a better idea of what you are hoping
to accomplish. I'm sure the FS community will have some thoughts for
you.
-MC

On Wed, Jan 28, 2009 at 5:41 AM, Boris Lansky <blansky@interwise.com>
wrote:

[blansky at interwise.com]

[intralanman at freeswi...]

Boris Lansky wrote:

[msc at freeswitch.org]

On Thu, Jan 29, 2009 at 8:06 AM, Raymond Chandler
<intralanman@freeswitch.org> wrote:

[blansky at interwise.com]

I have checked the "fs_path" usage … again (I have done it before I have issued my question as well). And once again I can't understand why this thing is useful for me. I have found only two small examples refer the issue that use "fs_path" for a an API call. What I need is a real configuration example that shows configuration of a Proxy Server for all outbound calls going out from a Free Switch. I will real appreciate if I will get an exact answer and not just a general link to a FS doc.

Regards,

Boris Lansky
Unified Communications Telephony Team
AT&T Unified Communications
Phone: +972.3.976.7604
Fax: +972.3.976.7712
blansky@interwise.com (Simon.shaw@att.com)



From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Raymond Chandler
Sent: Thursday, January 29, 2009 6:06 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Outbound Proxy configuration



Boris Lansky wrote:

[anthony.minessale at g...]

They probably saw your signature that says you work for AT&T and assumed you could follow the documentation since AT&T is a telephone company.

What they were trying to explain was if you want to send a call out of a sofia profile you can set the proxy on the fly with that extra parameter added to the dial string anywhere it's used.
The explanation requires you understand the basic operation of freeswitch.

<action application="bridge" data="sofia/internal/user@target.com (user@target.com);fs_path=sip:some.proxy.com"/>

the uri contained in fs_path indicates the sip address of a proxy server.




On Sun, Feb 1, 2009 at 4:37 AM, Boris Lansky <blansky@interwise.com (blansky@interwise.com)> wrote:

[blansky at interwise.com]

Thanks Anthony,
A little explanation of yours was very helpful. The directive works for me.

Regards,

Boris Lansky
Unified Communications Telephony Team
AT&T Unified Communications
Phone: +972.3.976.7604
Fax: +972.3.976.7712
blansky@interwise.com (Simon.shaw@att.com)


From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale
Sent: Sunday, February 01, 2009 8:19 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Outbound Proxy configuration


They probably saw your signature that says you work for AT&T and assumed you could follow the documentation since AT&T is a telephone company.

What they were trying to explain was if you want to send a call out of a sofia profile you can set the proxy on the fly with that extra parameter added to the dial string anywhere it's used.
The explanation requires you understand the basic operation of freeswitch.

<action application="bridge" data="sofia/internal/user@target.com (user@target.com);fs_path=sip:some.proxy.com"/>

the uri contained in fs_path indicates the sip address of a proxy server.




On Sun, Feb 1, 2009 at 4:37 AM, Boris Lansky <blansky@interwise.com (blansky@interwise.com)> wrote:
I have checked the "fs_path" usage … again (I have done it before I have issued my question as well). And once again I can't understand why this thing is useful for me. I have found only two small examples refer the issue that use "fs_path" for a an API call. What I need is a real configuration example that shows configuration of a Proxy Server for all outbound calls going out from a Free Switch. I will real appreciate if I will get an exact answer and not just a general link to a FS doc.

Regards,

Boris Lansky
Unified Communications Telephony Team
AT&T Unified Communications
Phone: +972.3.976.7604
Fax: +972.3.976.7712
blansky@interwise.com (Simon.shaw@att.com)




From: freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org) [mailto:freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org)] On Behalf Of Raymond Chandler
Sent: Thursday, January 29, 2009 6:06 PM

To: freeswitch-users@lists.freeswitch.org (freeswitch-users@lists.freeswitch.org)
Subject: Re: [Freeswitch-users] Outbound Proxy configuration




Boris Lansky wrote: