VoIP Mailing List Archives :: View topic - [Freeswitch-users] [newbie] Clean start with a simple configuration

Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community

[Freeswitch-users] [newbie] Clean start with a simple configuration

VoIP Mailing List Archives Forum Index -> freeSWITCH Users

View previous topic :: View next topic

Author

Message

xspambox at gmail.com
Guest

Posted: Sat Feb 14, 2009 8:57 pm Post subject: [Freeswitch-users] [newbie] Clean start with a simple config

Hi, I installed Freeswitch with this http://wiki.freeswitch.org/wiki/Quick_Start manual and it works! But it has al sorts of options enabled: 5000,9995, 9996, 9999, 80+[group], 30+[conf], voicemail, something about pizza (00_pizza_demo.xml) and a lot of other xml files and directories (default.xml and default/) etc. etc. That is not what i want. When i install Asterisk (the only PBX that i have experience with) and i clean out sip.conf and extensions.conf and replace them with this: ---------------------------------------- sip.conf [general] [1001] username=1001 secret=password1001 type=friend context=phones host=dynamic qualify=yes disallow=all allow=g726 [1002] username=1002 secret=password1002 type=friend context=phones host=dynamic qualify=yes disallow=all allow=ilbc ---------------------------------------- extensions.conf ---------------------------------------- [phones] exten => _[1001-1002],1,Dial(SIP/${EXTEN},60) exten => _[1001-1002],n,Hangup() ---------------------------------------- then i can simply call from one (local) sip phone to another and force transcoding between them. Nothing else. I want that also with Freeswitch. It is a good starting point but i am fiddeling with it for a couple of days now, read the docs but i can't get Freeswitch to do just this. So just calling between a few local sip phones with transcoding and _everything_ else disabled. Can anyone help me a little? Thanks in advance!

brian at freeswitch.org
Guest

Posted: Sat Feb 14, 2009 9:12 pm Post subject: [Freeswitch-users] [newbie] Clean start with a simple config

FreeSWITCH default config already has this feature. Register two
phones... 1000 and 1001 both with password of 1234 then you can call
between them. That will work exactly as you want out of the box.
Expect more simplified configs to show up after 1.0.3.

/b

On Feb 14, 2009, at 6:02 PM, xs wrote:

Quote:

I want that also with Freeswitch. It is a good starting point but i
am fiddeling with it for a couple of days now, read the docs but i
can't get Freeswitch to do just this. So just calling between a few
local sip phones with transcoding and _everything_ else disabled.

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

brian at freeswitch.org
Guest

Posted: Sat Feb 14, 2009 9:29 pm Post subject: [Freeswitch-users] [newbie] Clean start with a simple config

Well the config itself is easy to follow. The problem is coming from
Asterisk you have the wrong mindset to approach most things in
FreeSWITCH.

http://svn.freeswitch.org/svn/configs/ (softphone is the best small
config to look at)

The default config is easy to strip down once you take a few moments
to look at it and maybe hop on IRC and ask questions.

I wrote the default and the softphone config. So if you have
questions I'm just the person to ask. More config sets will appear as
I have time to write them.

/b

On Feb 14, 2009, at 8:20 PM, Tim Mattison wrote:

Quote:

I think the crux of the matter is "I can't get Freeswitch to do
_just_ this" (emphasis added). Users that are relatively new to
FreeSWITCH but Asterisk veterans want to know how to build a simple,
lean configuration. I'm trying to figure it out myself right now.

If simplified configs are only going to be posted after 1.0.3 what's
the best place to post my findings and configs? Is there an
explicit, sanctioned place for this kind of thing on the Wiki already?

Tim

Display posts from previous:

	VoIP Mailing List Archives Forum Index -> freeSWITCH Users	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum