VoIP Mailing List Archives

[sergey.kirillov at gma...]

Hi everybody,

I'm trying to use Sangoma A500 BRI card with OpenZap, but it does not work.

Can somebody help to to configure it?

Problem log (Incoming call):
2009-03-06 14:58:14 [WARNING] ozmod_wanpipe.c:953 wanpipe_next_event()
Unhandled event 2
2009-03-06 14:58:14 [WARNING] ozmod_wanpipe.c:953 wanpipe_next_event()
Unhandled event 2
2009-03-06 14:58:14 [WARNING] ozmod_wanpipe.c:953 wanpipe_next_event()
Unhandled event 2
2009-03-06 14:58:14 [NOTICE] switch_channel.c:567
switch_channel_set_name() New Channel OpenZAP/1:1/2360012
[7473c92a-0a4e-11de-9dc3-c56d4d411902]
2009-03-06 14:58:14 [INFO] mod_dialplan_xml.c:233 dialplan_hunt()
Processing 80503820933->2360012 in context default
2009-03-06 14:58:14 [NOTICE] switch_ivr.c:1343
switch_ivr_session_transfer() Transfer OpenZAP/1:1/2360012 to
XML[1000@default]
2009-03-06 14:58:14 [INFO] mod_dialplan_xml.c:233 dialplan_hunt()
Processing 80503820933->1000 in context default
2009-03-06 14:58:14 [INFO] switch_ivr_async.c:1730
switch_ivr_bind_dtmf_meta_session() Bound B-Leg: 1 execute_extension::dx
XML features
2009-03-06 14:58:14 [INFO] switch_ivr_async.c:1730
switch_ivr_bind_dtmf_meta_session() Bound B-Leg: 2
record_session::/opt/freeswitch/recordings/80503820933.2009-03-06-14-58-14.wav
2009-03-06 14:58:14 [INFO] switch_ivr_async.c:1730
switch_ivr_bind_dtmf_meta_session() Bound B-Leg: 3 execute_extension::cf
XML features
2009-03-06 14:58:14 [NOTICE] switch_channel.c:567
switch_channel_set_name() New Channel
sofia/internal/sip:1000@192.168.122.1:5061;transport=udp
[748a2ba2-0a4e-11de-9dc3-c56d4d411902]
2009-03-06 14:58:14 [ERR] Span:0 Q.921() Received UA frame in invalid state
2009-03-06 14:58:14 [ERR] Span:0 Q.921() Received UA frame in invalid state
2009-03-06 14:58:14 [NOTICE] switch_ivr_originate.c:1588
switch_ivr_originate() Pre-Answer OpenZAP/1:1/2360012!
2009-03-06 14:58:14 [ERR] Span:0 Q.921() Received UA frame in invalid state
2009-03-06 14:58:14 [CRIT] ozmod_isdn.c:964 zap_isdn_931_34() Received
unhandled message 125 (0x7d)
2009-03-06 14:58:15 [CRIT] ozmod_isdn.c:964 zap_isdn_931_34() Received
unhandled message 125 (0x7d)
2009-03-06 14:58:26 [NOTICE] Span:0 Q.921() I frame in invalid state ignored



Here are my config files

--- openzap.conf --
[span wanpipe BRI_1]
name => BRI_1
trunk_type => bri
b-channel => 1:1-2
d-channel => 1:3


--- openzap.conf.xml ---
<configuration name="openzap.conf" description="OpenZAP Configuration">
<settings>
<param name="debug" value="0"/>
<!--<param name="hold-music" value="$${moh_uri}"/>-->
<!--<param name="enable-analog-option" value="call-swap"/>-->
<!--<param name="enable-analog-option" value="3-way"/>-->
</settings>
<pri_spans>
<span name="BRI_1">
<!-- Log Levels: none, alert, crit, err, warning, notice, info, debug -->
<param name="q921loglevel" value="info"/>
<param name="q931loglevel" value="info"/>
<param name="mode" value="user"/>
<param name="dialect" value="q931"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
</span>
</pri_spans>
</configuration>


--- wanpipe1.conf ---
[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
wp1aft1 = wanpipe1, auto, API, Comment
wp1aft2 = wanpipe1, auto, API, Comment

[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 5
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
TE_RX_SLEVEL = 120
LBO = 120OH
TE_SIG_MODE = CCS
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_HW_DTMF = NO

[wp1aft1]
HDLC_STREAMING = NO
ACTIVE_CH = 1-15.17-31
IDLE_FLAG = 0x7E
MTU = 240
MRU = 240
DATA_MUX = NO
TDMV_HWEC = NO

[wp1aft2]
HDLC_STREAMING = YES
ACTIVE_CH = 16
MTU = 1500
MRU = 1500
DATA_MUX = NO
TDMV_HWEC = NO



_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

[sergey.kirillov at gma...]

Hi everybody,

I'm trying to use Sangoma A500 BRI card with OpenZap, but it does not work.

Can somebody help to to configure it?

Problem log (Incoming call):
------------
2009-03-06 14:58:14 [WARNING] ozmod_wanpipe.c:953 wanpipe_next_event()
Unhandled event 2
2009-03-06 14:58:14 [WARNING] ozmod_wanpipe.c:953 wanpipe_next_event()
Unhandled event 2
2009-03-06 14:58:14 [WARNING] ozmod_wanpipe.c:953 wanpipe_next_event()
Unhandled event 2
2009-03-06 14:58:14 [NOTICE] switch_channel.c:567
switch_channel_set_name() New Channel OpenZAP/1:1/2360012
[7473c92a-0a4e-11de-9dc3-c56d4d411902]
2009-03-06 14:58:14 [INFO] mod_dialplan_xml.c:233 dialplan_hunt()
Processing 80503820933->2360012 in context default
2009-03-06 14:58:14 [NOTICE] switch_ivr.c:1343
switch_ivr_session_transfer() Transfer OpenZAP/1:1/2360012 to
XML[1000@default]
2009-03-06 14:58:14 [INFO] mod_dialplan_xml.c:233 dialplan_hunt()
Processing 80503820933->1000 in context default
2009-03-06 14:58:14 [INFO] switch_ivr_async.c:1730
switch_ivr_bind_dtmf_meta_session() Bound B-Leg: 1 execute_extension::dx
XML features
2009-03-06 14:58:14 [INFO] switch_ivr_async.c:1730
switch_ivr_bind_dtmf_meta_session() Bound B-Leg: 2
record_session::/opt/freeswitch/recordings/80503820933.2009-03-06-14-58-14.wav
2009-03-06 14:58:14 [INFO] switch_ivr_async.c:1730
switch_ivr_bind_dtmf_meta_session() Bound B-Leg: 3 execute_extension::cf
XML features
2009-03-06 14:58:14 [NOTICE] switch_channel.c:567
switch_channel_set_name() New Channel
sofia/internal/sip:1000@192.168.122.1:5061;transport=udp
[748a2ba2-0a4e-11de-9dc3-c56d4d411902]
2009-03-06 14:58:14 [ERR] Span:0 Q.921() Received UA frame in invalid state
2009-03-06 14:58:14 [ERR] Span:0 Q.921() Received UA frame in invalid state
2009-03-06 14:58:14 [NOTICE] switch_ivr_originate.c:1588
switch_ivr_originate() Pre-Answer OpenZAP/1:1/2360012!
2009-03-06 14:58:14 [ERR] Span:0 Q.921() Received UA frame in invalid state
2009-03-06 14:58:14 [CRIT] ozmod_isdn.c:964 zap_isdn_931_34() Received
unhandled message 125 (0x7d)
2009-03-06 14:58:15 [CRIT] ozmod_isdn.c:964 zap_isdn_931_34() Received
unhandled message 125 (0x7d)
2009-03-06 14:58:26 [NOTICE] Span:0 Q.921() I frame in invalid state ignored
-----------


Here are my config files

--- openzap.conf --
[span wanpipe BRI_1]
name => BRI_1
trunk_type => bri
b-channel => 1:1-2
d-channel => 1:3


--- openzap.conf.xml ---
<configuration name="openzap.conf" description="OpenZAP Configuration">
<settings>
<param name="debug" value="0"/>
<!--<param name="hold-music" value="$${moh_uri}"/>-->
<!--<param name="enable-analog-option" value="call-swap"/>-->
<!--<param name="enable-analog-option" value="3-way"/>-->
</settings>
<pri_spans>
<span name="BRI_1">
<!-- Log Levels: none, alert, crit, err, warning, notice, info, debug -->
<param name="q921loglevel" value="info"/>
<param name="q931loglevel" value="info"/>
<param name="mode" value="user"/>
<param name="dialect" value="q931"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
</span>
</pri_spans>
</configuration>


--- wanpipe1.conf ---
[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
wp1aft1 = wanpipe1, auto, API, Comment
wp1aft2 = wanpipe1, auto, API, Comment

[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 5
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
TE_RX_SLEVEL = 120
LBO = 120OH
TE_SIG_MODE = CCS
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_HW_DTMF = NO

[wp1aft1]
HDLC_STREAMING = NO
ACTIVE_CH = 1-15.17-31
IDLE_FLAG = 0x7E
MTU = 240
MRU = 240
DATA_MUX = NO
TDMV_HWEC = NO

[wp1aft2]
HDLC_STREAMING = YES
ACTIVE_CH = 16
MTU = 1500
MRU = 1500
DATA_MUX = NO
TDMV_HWEC = NO



_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

[msc at freeswitch.org]

[anthony.minessale at g...]

it's not released yet,

please wait for the announcement that it has been completed sometime in the next week or 2.


On Mon, Mar 9, 2009 at 1:41 PM, Sergey Kirillov <sergey.kirillov@gmail.com (sergey.kirillov@gmail.com)> wrote:

[sergey.kirillov at gma...]

Is there a development version that I can check now?

On Mon, Mar 9, 2009, Anthony Minessale<Anthony Minessale> wrote:

[sergey.kirillov at gma...]

[anthony.minessale at g...]

As I have already stated, it will be added to SVN as soon as it's complete.


On Tue, Mar 10, 2009 at 2:48 AM, Sergey Kirillov <sergey.kirillov@gmail.com (sergey.kirillov@gmail.com)> wrote: