VoIP Mailing List Archives

[mprabhuram at gmail.com]

Hello,

[solko at gcdf.pl]

Prabhuram Mohan pisze:

[msc at freeswitch.org]

Do you need to monitor the possible failure of one of these calls? Just curious. You can call them individually and drop them into a conference right at the FS cmd line:

originate (sofia/profile/1001@192.168.1.108 (1001@192.168.1.108)) & conference(myconfname);
originate (sofia/profile/1002@192.168.1.108 (1002@192.168.1.108)) & conference(myconfname);
originate (sofia/profile/1003@192.168.1.108 (1003@192.168.1.108)) & conference(myconfname);

You can control the conference behavior with numerous options. See http://wiki.freeswitch.org/wiki/Mod_conference for lots of great information.

-MC

On Thu, Apr 16, 2009 at 1:09 AM, Prabhuram Mohan <mprabhuram@gmail.com (mprabhuram@gmail.com)> wrote:

[mprabhuram at gmail.com]

Hi Mike,

I tried the following command per ur advice.. but getting the error CHAN_NOT_IMPLEMENTED

originate (sofia/profile/1001@192.168.1.108 (1001@192.168.1.108)) & conference(3085-192.168.1.102);
freeswitch@internal> originate (sofia/profile/1001@192.168.1.102 (1001@192.168.1.102)) & conference(3085-192.168.1.102); -ERR CHAN_NOT_IMPLEMENTEDfreeswitch@internal> 2009-04-16 20:28:30 [ERR] switch_core_session.c:303 switch_core_session_outgoing_channel() Could not locate channel type (sofia 2009-04-16 20:28:30 [ERR] switch_ivr_originate.c:1486 switch_ivr_originate() Cannot create outgoing channel of type [(sofia] cause: [CHAN_NOT_IMPLEMENTED] 2009-04-16 20:28:30 [DEBUG] switch_ivr_originate.c:2084 switch_ivr_originate() Originate Resulted in Error Cause: 66 [CHAN_NOT_IMPLEMENTED]

Thanks
prabhu

On Thu, Apr 16, 2009 at 4:29 PM, Michael Collins <msc@freeswitch.org (msc@freeswitch.org)> wrote:

[brian at freeswitch.org]

First off remove the () around the sofia URI.

/b

On Apr 16, 2009, at 10:33 PM, Prabhuram Mohan wrote:

[dave at 3c.co.uk]

Take out the brackets -
originate sofia/profile/1001...
(and you might want to replace profile with the name of the profile to
use)

There's documentation here which might help:
http://wiki.freeswitch.org/wiki/Mod_commands#originate

--Dave

[mprabhuram at gmail.com]

Thanks Brain/ Dave,

I ran the modified command as follows

originate sofia/default/1001@192.168.1.102 (1001@192.168.1.102) &conference(3085-192.168.1.102)
this time fs is able to create channel but  am getting a different error : "sofia.c:3845 Cannot Blind Tranfer one legged call"
Prabhu

On Thu, Apr 16, 2009 at 8:58 PM, David Knell <dave@3c.co.uk (dave@3c.co.uk)> wrote:

[brian at freeswitch.org]

Are you calling a registered user? If so then please replace the @ with a % or user user/1001@192.168.1.102 ([email]user/1001@192.168.1.102[/email])

/b
PS I do get called brain a lot!

On Apr 16, 2009, at 11:45 PM, Prabhuram Mohan wrote:

[mprabhuram at gmail.com]

Hi Brian,

 The follower command worked per your suggestion

  originate user/1001@192.168.1.102 (1001@192.168.1.102) &conference(3000-192.168.1.102)
Thanks a lot,
Prabhu

On Fri, Apr 17, 2009 at 6:43 AM, Brian West <brian@freeswitch.org (brian@freeswitch.org)> wrote: