VoIP Mailing List Archives

[adnan at barakatdesign...]

Hi All,

I'm trying to use uuid_displace to play a message to a caller who is in
the fifo queue, but uuid_displace doesn't play until the destination
answers.

I've tried uuid_broadcast, but the quality of the call becomes *really*
bad, then returns to normal quality after the file has finished playing.

I have also tried to use streamfile() from lua, but this mixes the audio
file with the music on hold of the fifo (also very poor quality).

What I am trying to achieve is the ability to play a file (and stop it
on demand) to the caller, and/or also be able to use the phrase function
to announce the caller's position.

At the moment the caller is put into the fifo queue, then a separate
script is run via luarun which dials the destination and bridges.

Any ideas or suggestions on how to do this would be highly appreciated.

Thanks

Adnan

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

[brian at freeswitch.org]

What SVN rev are you on?

/b

On Apr 23, 2009, at 9:44 AM, Adnan Barakat wrote:

[technical at ttnc.co.uk]

13130

Brian West wrote:

[anthony.minessale at g...]

look at the chimelist feature


On Thu, Apr 23, 2009 at 10:06 AM, TTNC - Adnan Barakat <technical@ttnc.co.uk (technical@ttnc.co.uk)> wrote:

[msc at freeswitch.org]

On Thu, Apr 23, 2009 at 2:18 PM, Anthony Minessale <anthony.minessale@gmail.com (anthony.minessale@gmail.com)> wrote:

[technical at ttnc.co.uk]

I tried this;
session:setVariable("fifo_chime_list",
"/mnt/nas/freeswitch/recordings/misc/pf-unavailable.al");
session:setVariable("fifo_chime_freq", "20");
session:execute("fifo", queue_name.." in");

which didn't work - but using this is it possible to use the phrase
function to say the caller's position?

I'm I right in assuming uuid_displace only works on bridged calls?


Thanks

Adnan

Anthony Minessale wrote:

[technical at ttnc.co.uk]

Actually;
Just noticed that if I set fifo_music it doesn't work, whereas if I set
fifo_music to "" it works.


Thanks,

Adnan

Anthony Minessale wrote:

[technical at ttnc.co.uk]

Any ideas?

Is there no way uuid_displace can work on a non-bridged channel as it
appears to be the ideal solution?

TTNC - Adnan Barakat wrote:

[technical at ttnc.co.uk]

Just thinking - is there anyway to temporarily pause or silence the moh
in fifo via lua? as this would solve the problem.


Thanks

Adnan

TTNC - Adnan Barakat wrote:

[brian at freeswitch.org]

Nope, It works fine with fifo_music set. I just tested it... might wanna look at fifo_chime_freq also.

/b


On Apr 24, 2009, at 2:20 AM, TTNC - Adnan Barakat wrote:

[technical at ttnc.co.uk]

Just tried this which didn't work (moh plays - but no announcement);
session:setVariable("fifo_music",
"tone_stream://%(400,200,400,450);%(400,2200,400,450)");
session:setVariable("fifo_chime_list",
"/mnt/nas/freeswitch/recordings/misc/pf-unavailable.al");
session:setVariable("fifo_chime_freq", "15");
session:execute("fifo", queue_name.." in");

I also tried setting fifo_music to a filename like so which also had the
same behaviour as above;
session:setVariable("fifo_music",
"/mnt/nas/freeswitch/recordings/moh/Deliberate Thought.al");


Then tried this which does work, but no moh;
session:setVariable("fifo_music", "");
session:setVariable("fifo_chime_list",
"/mnt/nas/freeswitch/recordings/misc/pf-unavailable.al");
session:setVariable("fifo_chime_freq", "15");
session:execute("fifo", queue_name.." in");

Is there a way temporarily pause or silence the moh? as I've found a way
to play the message and the caller's position via the script called by
luarun, only problem is it's trying to mix the audio which sounds very
choppy.


Thanks,

Adnan


Brian West wrote:

[anthony.minessale at g...]

what platform are you running on and what rev of the code?

first off media bugs are intentionally disabled in fifo and uuid_displace uses that.

I cut and pasted your script and all i changed was the name of the chime file and it works.

I heard uk ring for 15 seconds then my file plays then ringing ... repeating....

then i did this from the cli

uuid_broadcast <uuid> phrase:voicemail_message_count:12:new

and it works

i suggest maybe you update your code or rebuild it clean.



On Fri, Apr 24, 2009 at 9:11 AM, TTNC - Adnan Barakat <technical@ttnc.co.uk (technical@ttnc.co.uk)> wrote:

[technical at ttnc.co.uk]

Anthony Minessale wrote:

[anthony.minessale at g...]

On Mon, Apr 27, 2009 at 3:39 AM, TTNC - Adnan Barakat <technical@ttnc.co.uk (technical@ttnc.co.uk)> wrote:

[technical at ttnc.co.uk]

Anthony Minessale wrote: