VoIP Mailing List Archives

[larclap at yahoo.com]

I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.

Why is it that after I launch freeswitch and type in either 'show' or
'status' at the console, it responds with 'Unknown command', but it does
accept 'shutdown'?

Thanks, Lars


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

[brian at freeswitch.org]

Its just "status"

Also please do not hijack threads.. Click new message and input the address freeswitch-users@lists.freeswitch.org (freeswitch-users@lists.freeswitch.org)


Thanks,
Brian

On May 7, 2009, at 8:13 PM, Lars Zeb wrote:

[shannon at sacredheart...]

Check out the wiki for more info.

Wiki.FreeSWITCH.org

On Thursday, May 7, 2009, Lars Zeb <larclap@yahoo.com> wrote:

[jason at jasonjgw.net]

Lars Zeb <larclap@yahoo.com> wrote:

[larclap at yahoo.com]

Sorry for the hijacking, too anxious.

I typed only one of the two commands – both Unknown.

2009-05-07 17:52:52 [CONSOLE] switch_core.c:1322 switch_core_init_and_modload()
FreeSWITCH Version 1.0.4pre7 (13238M) Started.
Crash Protection [Disabled]
Max Sessions[1000]
Session Rate[30]
SQL [Enabled]
freeswitch@fs> show
Unknown Command: show
freeswitch@fs> status
Unknown Command: status

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West
Sent: Thursday, May 07, 2009 6:20 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Total noob question



Its just "status"


Also please do not hijack threads.. Click new message and input the address freeswitch-users@lists.freeswitch.org (freeswitch-users@lists.freeswitch.org)



Thanks,

Brian


On May 7, 2009, at 8:13 PM, Lars Zeb wrote:




I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.

Why is it that after I launch freeswitch and type in either 'show' or
'status' at the console, it responds with 'Unknown command', but it does
accept 'shutdown'?

Thanks, Lars


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



Brian West

brian@freeswitch.org (brian@freeswitch.org)




-- Meet us at ClueCon! http://www.cluecon.com

[brian at freeswitch.org]

Weird did you modify anything in modules.conf?

/b

On May 7, 2009, at 9:01 PM, Lars Zeb wrote:

[larclap at yahoo.com]

In launching freeswitch, I noticed the errors below, plus many more I did
not copy here. Also the mod directory had only two modules in it, so I
rebuilt from the tarball again. Same results.

I did ./configure, make and make install. What have I done wrong?

Thanks, Lars

2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_console.so
**/usr/local/freeswitch/mod/mod_console.so: cannot open shared object file:
No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_logfile.so
**/usr/local/freeswitch/mod/mod_logfile.so: cannot open shared object file:
No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_enum.so
**/usr/local/freeswitch/mod/mod_enum.so: cannot open shared object file: No
such file or directory**
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:314 load_config() Adding default
template.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
sql.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
example.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
snom.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
linksys.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
asterisk.
2009-05-08 05:52:32 [CONSOLE] switch_loadable_module.c:889
switch_loadable_module_load_file() Successfully Loaded [mod_cdr_csv]
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_event_socket.so
**/usr/local/freeswitch/mod/mod_event_socket.so: cannot open shared object
file: No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_sofia.so
**/usr/local/freeswitch/mod/mod_sofia.so: cannot open shared object file: No
such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_loopback.so
**/usr/local/freeswitch/mod/mod_loopback.so: cannot open shared object file:
No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_commands.so
**/usr/local/freeswitch/mod/mod_commands.so: cannot open shared object file:
No such file or directory**
...
FreeSWITCH Version 1.0.4pre7 (13238M) Started.
Crash Protection [Disabled]
Max Sessions[1000]
Session Rate[30]
SQL [Enabled]

fs:/usr/local/freeswitch/mod # l
total 104
drwxr-xr-x 2 root root 4096 2009-05-08 06:23 ./
drwxr-xr-x 13 root root 4096 2009-05-08 06:23 ../
-rwxr-xr-x 1 root root 37098 2009-05-08 06:23 mod_amr.so*
-rwxr-xr-x 1 root root 52950 2009-05-08 06:23 mod_cdr_csv.so*


make[5]: *** [mod_cluechoo.lo] Error 1
make[4]: *** [all] Error 1
make[3]: *** [mod_cluechoo-all] Error 1
make[2]: *** [all-recursive] Error 1
Making all in build
+-------- FreeSWITCH Build Complete -----------+
+ FreeSWITCH has been successfully built. +
+ Install by running: +
+ +
+ make install +
+----------------------------------------------+
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

Making install in build
+-------- FreeSWITCH install Complete ----------+
+ FreeSWITCH has been successfully installed. +
+ +
...
+ +
+-----------------------------------------------+
make[1]: *** [install-recursive] Error 1
make: *** [install] Error 2


-----Original Message-----
From: freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jason
White
Sent: Thursday, May 07, 2009 6:25 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Total noob question

Lars Zeb <larclap@yahoo.com> wrote:

[msc at freeswitch.org]

Lars,

May I suggest this process:

make clean && svn up && ./bootstrap.sh && ./configure && make install

It's one step less intensive than starting with a fresh checkout. I just did that on four systems last night that all had a buggy build with cluechoo and file_string and now all four are humming along nicely.

-MC

On Fri, May 8, 2009 at 6:54 AM, Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote:

[msc at freeswitch.org]

Okay, time for a fresh checkout. If you are on Linux then I recommend that you completely "rm -fr" your freeswitch source directory, then do the quick and dirty install:

http://wiki.freeswitch.org/wiki/Quick_and_Dirty_Install

Let us know if that works...
-MC

On Fri, May 8, 2009 at 10:20 AM, Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote:

[larclap at yahoo.com]

The mod modules are still not built. I tried with your suggestion.

making install mod_cluechoo
Compiling mod_cluechoo.c...
quiet_libtool: compile: gcc -I/usr/src/freeswitch/src/include -I/usr/src/freeswitch/libs/libteletone/src -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -g -O2 -Wall -std=c99 -pedantic -D_GNU_SOURCE -DHAVE_CONFIG_H -c mod_cluechoo.c -fPIC -DPIC -o .libs/mod_cluechoo.o
cc1: warnings being treated as errors
mod_cluechoo.c: In function ‘go’:
mod_cluechoo.c:188: error: call to function ‘add_D51’ without a real prototype
mod_cluechoo.c:45: note: ‘add_D51’ was declared here
mod_cluechoo.c:190: error: call to function ‘add_sl’ without a real prototype
mod_cluechoo.c:46: note: ‘add_sl’ was declared here
mod_cluechoo.c: In function ‘vgo’:
mod_cluechoo.c:313: error: call to function ‘add_D51’ without a real prototype
mod_cluechoo.c:45: note: ‘add_D51’ was declared here
mod_cluechoo.c:315: error: call to function ‘add_sl’ without a real prototype
mod_cluechoo.c:46: note: ‘add_sl’ was declared here
mod_cluechoo.c: In function ‘add_sl’:
mod_cluechoo.c:369: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:370: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:370: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:371: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:371: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:373: error: call to function ‘add_smoke’ without a real prototype
mod_cluechoo.c:48: note: ‘add_smoke’ was declared here
mod_cluechoo.c: In function ‘add_D51’:
mod_cluechoo.c:419: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:420: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:422: error: call to function ‘add_smoke’ without a real prototype
mod_cluechoo.c:48: note: ‘add_smoke’ was declared here
make[5]: *** [mod_cluechoo.lo] Error 1
make[4]: *** [install] Error 1
make[3]: *** [mod_cluechoo-install] Error 1
make[2]: *** [install-recursive] Error 1
Making install in build
+-------- FreeSWITCH install Complete ----------+
+ FreeSWITCH has been successfully installed. +
+ +
+ Install sounds: +
+ (uhd-sounds includes hd-sounds, sounds) +
+ (hd-sounds includes sounds) +
+ … +
+-----------------------------------------------+
make[1]: *** [install-recursive] Error 1
make: *** [install] Error 2

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins
Sent: Friday, May 08, 2009 8:30 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Total noob question


Lars,

May I suggest this process:

make clean && svn up && ./bootstrap.sh && ./configure && make install

It's one step less intensive than starting with a fresh checkout. I just did that on four systems last night that all had a buggy build with cluechoo and file_string and now all four are humming along nicely.

-MC
On Fri, May 8, 2009 at 6:54 AM, Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote:
In launching freeswitch, I noticed the errors below, plus many more I did
not copy here. Also the mod directory had only two modules in it, so I
rebuilt from the tarball again. Same results.

I did ./configure, make and make install. What have I done wrong?

Thanks, Lars

2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_console.so
**/usr/local/freeswitch/mod/mod_console.so: cannot open shared object file:
No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_logfile.so
**/usr/local/freeswitch/mod/mod_logfile.so: cannot open shared object file:
No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_enum.so
**/usr/local/freeswitch/mod/mod_enum.so: cannot open shared object file: No
such file or directory**
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:314 load_config() Adding default
template.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
sql.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
example.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
snom.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
linksys.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
asterisk.
2009-05-08 05:52:32 [CONSOLE] switch_loadable_module.c:889
switch_loadable_module_load_file() Successfully Loaded [mod_cdr_csv]
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_event_socket.so
**/usr/local/freeswitch/mod/mod_event_socket.so: cannot open shared object
file: No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_sofia.so
**/usr/local/freeswitch/mod/mod_sofia.so: cannot open shared object file: No
such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_loopback.so
**/usr/local/freeswitch/mod/mod_loopback.so: cannot open shared object file:
No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_commands.so
**/usr/local/freeswitch/mod/mod_commands.so: cannot open shared object file:
No such file or directory**
...
FreeSWITCH Version 1.0.4pre7 (13238M) Started.
Crash Protection [Disabled]
Max Sessions[1000]
Session Rate[30]
SQL [Enabled]

fs:/usr/local/freeswitch/mod # l
total 104
drwxr-xr-x 2 root root 4096 2009-05-08 06:23 ./
drwxr-xr-x 13 root root 4096 2009-05-08 06:23 ../
-rwxr-xr-x 1 root root 37098 2009-05-08 06:23 mod_amr.so*
-rwxr-xr-x 1 root root 52950 2009-05-08 06:23 mod_cdr_csv.so*


make[5]: *** [mod_cluechoo.lo] Error 1
make[4]: *** [all] Error 1
make[3]: *** [mod_cluechoo-all] Error 1
make[2]: *** [all-recursive] Error 1
Making all in build
+-------- FreeSWITCH Build Complete -----------+
+ FreeSWITCH has been successfully built. +
+ Install by running: +
+ +
+ make install +
+----------------------------------------------+
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

Making install in build
+-------- FreeSWITCH install Complete ----------+
+ FreeSWITCH has been successfully installed. +
+ +
...
+ +
+-----------------------------------------------+
make[1]: *** [install-recursive] Error 1
make: *** [install] Error 2


-----Original Message-----
From: freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org)

[mailto:freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org)] On Behalf Of Jason
White
Sent: Thursday, May 07, 2009 6:25 PM
To: freeswitch-users@lists.freeswitch.org (freeswitch-users@lists.freeswitch.org)
Subject: Re: [Freeswitch-users] Total noob question

Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote:

[larclap at yahoo.com]

Sorry to report that the results are the same. I executed the ‘make’ command after the ‘wget’ and captured stderr and stdout to a file. I uploaded it to http://rapidshare.com/files/230726648/openSuse_11.1_Freeswitch-1.0.4pre7_log.zip.html if it’s of any use.

The mod_cluechoo errors persist. The only mods in the mod folder are mod_amr.(la & so) and mod-cdr_csv.(la & so).

Maybe I should swap another OS. I’m willing to try anything to get freeswitch up.

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins
Sent: Friday, May 08, 2009 10:26 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Total noob question


Okay, time for a fresh checkout. If you are on Linux then I recommend that you completely "rm -fr" your freeswitch source directory, then do the quick and dirty install:

http://wiki.freeswitch.org/wiki/Quick_and_Dirty_Install

Let us know if that works...
-MC
On Fri, May 8, 2009 at 10:20 AM, Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote:
The mod modules are still not built. I tried with your suggestion.

making install mod_cluechoo
Compiling mod_cluechoo.c...
quiet_libtool: compile: gcc -I/usr/src/freeswitch/src/include -I/usr/src/freeswitch/libs/libteletone/src -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -g -O2 -Wall -std=c99 -pedantic -D_GNU_SOURCE -DHAVE_CONFIG_H -c mod_cluechoo.c -fPIC -DPIC -o .libs/mod_cluechoo.o
cc1: warnings being treated as errors
mod_cluechoo.c: In function ‘go’:
mod_cluechoo.c:188: error: call to function ‘add_D51’ without a real prototype
mod_cluechoo.c:45: note: ‘add_D51’ was declared here
mod_cluechoo.c:190: error: call to function ‘add_sl’ without a real prototype
mod_cluechoo.c:46: note: ‘add_sl’ was declared here
mod_cluechoo.c: In function ‘vgo’:
mod_cluechoo.c:313: error: call to function ‘add_D51’ without a real prototype
mod_cluechoo.c:45: note: ‘add_D51’ was declared here
mod_cluechoo.c:315: error: call to function ‘add_sl’ without a real prototype
mod_cluechoo.c:46: note: ‘add_sl’ was declared here
mod_cluechoo.c: In function ‘add_sl’:
mod_cluechoo.c:369: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:370: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:370: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:371: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:371: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:373: error: call to function ‘add_smoke’ without a real prototype
mod_cluechoo.c:48: note: ‘add_smoke’ was declared here
mod_cluechoo.c: In function ‘add_D51’:
mod_cluechoo.c:419: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:420: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:422: error: call to function ‘add_smoke’ without a real prototype
mod_cluechoo.c:48: note: ‘add_smoke’ was declared here
make[5]: *** [mod_cluechoo.lo] Error 1

make[4]: *** [install] Error 1
make[3]: *** [mod_cluechoo-install] Error 1
make[2]: *** [install-recursive] Error 1
Making install in build
+-------- FreeSWITCH install Complete ----------+
+ FreeSWITCH has been successfully installed. +
+ +

+ Install sounds: +
+ (uhd-sounds includes hd-sounds, sounds) +
+ (hd-sounds includes sounds) +
+ … +
+-----------------------------------------------+
make[1]: *** [install-recursive] Error 1
make: *** [install] Error 2


From: freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org) [mailto:freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org)] On Behalf Of Michael Collins
Sent: Friday, May 08, 2009 8:30 AM

To: freeswitch-users@lists.freeswitch.org (freeswitch-users@lists.freeswitch.org)
Subject: Re: [Freeswitch-users] Total noob question




Lars,

May I suggest this process:

make clean && svn up && ./bootstrap.sh && ./configure && make install

It's one step less intensive than starting with a fresh checkout. I just did that on four systems last night that all had a buggy build with cluechoo and file_string and now all four are humming along nicely.

-MC
On Fri, May 8, 2009 at 6:54 AM, Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote:
In launching freeswitch, I noticed the errors below, plus many more I did
not copy here. Also the mod directory had only two modules in it, so I
rebuilt from the tarball again. Same results.

I did ./configure, make and make install. What have I done wrong?

Thanks, Lars

2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_console.so
**/usr/local/freeswitch/mod/mod_console.so: cannot open shared object file:
No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_logfile.so
**/usr/local/freeswitch/mod/mod_logfile.so: cannot open shared object file:
No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_enum.so
**/usr/local/freeswitch/mod/mod_enum.so: cannot open shared object file: No
such file or directory**
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:314 load_config() Adding default
template.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
sql.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
example.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
snom.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
linksys.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
asterisk.
2009-05-08 05:52:32 [CONSOLE] switch_loadable_module.c:889
switch_loadable_module_load_file() Successfully Loaded [mod_cdr_csv]
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_event_socket.so
**/usr/local/freeswitch/mod/mod_event_socket.so: cannot open shared object
file: No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_sofia.so
**/usr/local/freeswitch/mod/mod_sofia.so: cannot open shared object file: No
such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_loopback.so
**/usr/local/freeswitch/mod/mod_loopback.so: cannot open shared object file:
No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_commands.so
**/usr/local/freeswitch/mod/mod_commands.so: cannot open shared object file:
No such file or directory**
...
FreeSWITCH Version 1.0.4pre7 (13238M) Started.
Crash Protection [Disabled]
Max Sessions[1000]
Session Rate[30]
SQL [Enabled]

fs:/usr/local/freeswitch/mod # l
total 104
drwxr-xr-x 2 root root 4096 2009-05-08 06:23 ./
drwxr-xr-x 13 root root 4096 2009-05-08 06:23 ../
-rwxr-xr-x 1 root root 37098 2009-05-08 06:23 mod_amr.so*
-rwxr-xr-x 1 root root 52950 2009-05-08 06:23 mod_cdr_csv.so*


make[5]: *** [mod_cluechoo.lo] Error 1
make[4]: *** [all] Error 1
make[3]: *** [mod_cluechoo-all] Error 1
make[2]: *** [all-recursive] Error 1
Making all in build
+-------- FreeSWITCH Build Complete -----------+
+ FreeSWITCH has been successfully built. +
+ Install by running: +
+ +
+ make install +
+----------------------------------------------+
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

Making install in build
+-------- FreeSWITCH install Complete ----------+
+ FreeSWITCH has been successfully installed. +
+ +
...
+ +
+-----------------------------------------------+
make[1]: *** [install-recursive] Error 1
make: *** [install] Error 2


-----Original Message-----
From: freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org)

[mailto:freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org)] On Behalf Of Jason
White
Sent: Thursday, May 07, 2009 6:25 PM
To: freeswitch-users@lists.freeswitch.org (freeswitch-users@lists.freeswitch.org)
Subject: Re: [Freeswitch-users] Total noob question

Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote:

[msc at freeswitch.org]

Well, Tony likes to say that you can compile FreeSWITCH anywhere but he only supports it if the name of the OS rhymes with Mentos.

We have had much success with CentOS 5.x installs. I can highly recommend it.
-MC

On Fri, May 8, 2009 at 1:46 PM, Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote:

[larclap at yahoo.com]

Thanks, Michael, CentOS worked like a charm.

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins
Sent: Friday, May 08, 2009 2:01 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Total noob question


Well, Tony likes to say that you can compile FreeSWITCH anywhere but he only supports it if the name of the OS rhymes with Mentos.

We have had much success with CentOS 5.x installs. I can highly recommend it.
-MC
On Fri, May 8, 2009 at 1:46 PM, Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote:
Sorry to report that the results are the same. I executed the ‘make’ command after the ‘wget’ and captured stderr and stdout to a file. I uploaded it to http://rapidshare.com/files/230726648/openSuse_11.1_Freeswitch-1.0.4pre7_log.zip.html if it’s of any use.

The mod_cluechoo errors persist. The only mods in the mod folder are mod_amr.(la & so) and mod-cdr_csv.(la & so).

Maybe I should swap another OS. I’m willing to try anything to get freeswitch up.

From: freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org) [mailto:freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org)] On Behalf Of Michael Collins
Sent: Friday, May 08, 2009 10:26 AM

To: freeswitch-users@lists.freeswitch.org (freeswitch-users@lists.freeswitch.org)
Subject: Re: [Freeswitch-users] Total noob question




Okay, time for a fresh checkout. If you are on Linux then I recommend that you completely "rm -fr" your freeswitch source directory, then do the quick and dirty install:

http://wiki.freeswitch.org/wiki/Quick_and_Dirty_Install

Let us know if that works...
-MC
On Fri, May 8, 2009 at 10:20 AM, Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote:
The mod modules are still not built. I tried with your suggestion.

making install mod_cluechoo
Compiling mod_cluechoo.c...
quiet_libtool: compile: gcc -I/usr/src/freeswitch/src/include -I/usr/src/freeswitch/libs/libteletone/src -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -g -O2 -Wall -std=c99 -pedantic -D_GNU_SOURCE -DHAVE_CONFIG_H -c mod_cluechoo.c -fPIC -DPIC -o .libs/mod_cluechoo.o
cc1: warnings being treated as errors
mod_cluechoo.c: In function ‘go’:
mod_cluechoo.c:188: error: call to function ‘add_D51’ without a real prototype
mod_cluechoo.c:45: note: ‘add_D51’ was declared here
mod_cluechoo.c:190: error: call to function ‘add_sl’ without a real prototype
mod_cluechoo.c:46: note: ‘add_sl’ was declared here
mod_cluechoo.c: In function ‘vgo’:
mod_cluechoo.c:313: error: call to function ‘add_D51’ without a real prototype
mod_cluechoo.c:45: note: ‘add_D51’ was declared here
mod_cluechoo.c:315: error: call to function ‘add_sl’ without a real prototype
mod_cluechoo.c:46: note: ‘add_sl’ was declared here
mod_cluechoo.c: In function ‘add_sl’:
mod_cluechoo.c:369: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:370: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:370: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:371: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:371: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:373: error: call to function ‘add_smoke’ without a real prototype
mod_cluechoo.c:48: note: ‘add_smoke’ was declared here
mod_cluechoo.c: In function ‘add_D51’:
mod_cluechoo.c:419: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:420: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:422: error: call to function ‘add_smoke’ without a real prototype
mod_cluechoo.c:48: note: ‘add_smoke’ was declared here
make[5]: *** [mod_cluechoo.lo] Error 1

make[4]: *** [install] Error 1
make[3]: *** [mod_cluechoo-install] Error 1
make[2]: *** [install-recursive] Error 1
Making install in build
+-------- FreeSWITCH install Complete ----------+
+ FreeSWITCH has been successfully installed. +
+ +

+ Install sounds: +
+ (uhd-sounds includes hd-sounds, sounds) +
+ (hd-sounds includes sounds) +
+ … +
+-----------------------------------------------+
make[1]: *** [install-recursive] Error 1
make: *** [install] Error 2


From: freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org) [mailto:freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org)] On Behalf Of Michael Collins
Sent: Friday, May 08, 2009 8:30 AM

To: freeswitch-users@lists.freeswitch.org (freeswitch-users@lists.freeswitch.org)
Subject: Re: [Freeswitch-users] Total noob question




Lars,

May I suggest this process:

make clean && svn up && ./bootstrap.sh && ./configure && make install

It's one step less intensive than starting with a fresh checkout. I just did that on four systems last night that all had a buggy build with cluechoo and file_string and now all four are humming along nicely.

-MC
On Fri, May 8, 2009 at 6:54 AM, Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote:
In launching freeswitch, I noticed the errors below, plus many more I did
not copy here. Also the mod directory had only two modules in it, so I
rebuilt from the tarball again. Same results.

I did ./configure, make and make install. What have I done wrong?

Thanks, Lars

2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_console.so
**/usr/local/freeswitch/mod/mod_console.so: cannot open shared object file:
No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_logfile.so
**/usr/local/freeswitch/mod/mod_logfile.so: cannot open shared object file:
No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_enum.so
**/usr/local/freeswitch/mod/mod_enum.so: cannot open shared object file: No
such file or directory**
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:314 load_config() Adding default
template.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
sql.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
example.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
snom.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
linksys.
2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template
asterisk.
2009-05-08 05:52:32 [CONSOLE] switch_loadable_module.c:889
switch_loadable_module_load_file() Successfully Loaded [mod_cdr_csv]
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_event_socket.so
**/usr/local/freeswitch/mod/mod_event_socket.so: cannot open shared object
file: No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_sofia.so
**/usr/local/freeswitch/mod/mod_sofia.so: cannot open shared object file: No
such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_loopback.so
**/usr/local/freeswitch/mod/mod_loopback.so: cannot open shared object file:
No such file or directory**
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871
switch_loadable_module_load_file() Error Loading module
/usr/local/freeswitch/mod/mod_commands.so
**/usr/local/freeswitch/mod/mod_commands.so: cannot open shared object file:
No such file or directory**
...
FreeSWITCH Version 1.0.4pre7 (13238M) Started.
Crash Protection [Disabled]
Max Sessions[1000]
Session Rate[30]
SQL [Enabled]

fs:/usr/local/freeswitch/mod # l
total 104
drwxr-xr-x 2 root root 4096 2009-05-08 06:23 ./
drwxr-xr-x 13 root root 4096 2009-05-08 06:23 ../
-rwxr-xr-x 1 root root 37098 2009-05-08 06:23 mod_amr.so*
-rwxr-xr-x 1 root root 52950 2009-05-08 06:23 mod_cdr_csv.so*


make[5]: *** [mod_cluechoo.lo] Error 1
make[4]: *** [all] Error 1
make[3]: *** [mod_cluechoo-all] Error 1
make[2]: *** [all-recursive] Error 1
Making all in build
+-------- FreeSWITCH Build Complete -----------+
+ FreeSWITCH has been successfully built. +
+ Install by running: +
+ +
+ make install +
+----------------------------------------------+
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

Making install in build
+-------- FreeSWITCH install Complete ----------+
+ FreeSWITCH has been successfully installed. +
+ +
...
+ +
+-----------------------------------------------+
make[1]: *** [install-recursive] Error 1
make: *** [install] Error 2


-----Original Message-----
From: freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org)

[mailto:freeswitch-users-bounces@lists.freeswitch.org (freeswitch-users-bounces@lists.freeswitch.org)] On Behalf Of Jason
White
Sent: Thursday, May 07, 2009 6:25 PM
To: freeswitch-users@lists.freeswitch.org (freeswitch-users@lists.freeswitch.org)
Subject: Re: [Freeswitch-users] Total noob question

Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote: