VoIP Mailing List Archives

[larclap at yahoo.com]

I am a total newbie. I have set up FS on CentOS with this group’s help. I can make an outbound call via an ITSP (flowroute).

I have struggled receiving a call. Freeswitch does not answer when I dial the DID from outside.

I already have an Asterisk box on the LAN with SIP port at 5060. So I asked the group what to do and the reply was to change the sip port in vars.xml, which I did. But ignorantly (I think) I set the internal_sip_port=5090, rather than the external_sip_port. It dawned on me that I might have made this mistake when I look at:

freeswitch@fs> sofia status
API CALL [sofia(status)] output:
Name Type Data State
=================================================================================================
internal profile sip:mod_sofia@192.168.10.29:5090 RUNNING (0)
external profile sip:mod_sofia@64.105.128.82:5080 RUNNING (0)
example.com gateway sip:joeuser@example.com NOREG
flowroute gateway sip:77505382@sip.flowroute.com REGED
192.168.10.29 alias internal ALIASED
internal-ipv6 profile sip:mod_sofia@[::1]:5090 RUNNING (0)
default alias internal ALIASED
nat alias external ALIASED
outbound alias external ALIASED
=================================================================================================
3 profiles 4 aliases

So if I change external_sip_port=5090, I think I should be OK. However, the 64.105.128.82 is not correct. Since I had to create a new SIP port at 5090, I had to tell my hardware firewall about it. So I created SIP=5090 at 64.105.128.83 (the Asterisk box is sitting at 64.105.128.82).

How is FS getting 64.105.128.82 in ‘sofia status’ and how can I change that to 64.105.128.83?

Thanks, Lars

[brian at freeswitch.org]

Its guessing the IP you'll have to set it to the IP you want by opening up the sofia profile in sip_profiles/internal.xml and external.xml and specify the EXACT IP to use.

On another note please stop hijacking threads.


/b

On May 14, 2009, at 3:21 PM, Lars Zeb wrote:

[larclap at yahoo.com]

Sorry about hijacking, but please tell me how I did that so I can avoid it in the future. I merely sent a message to freeswitch-users@lists.freeswitch.org (freeswitch-users@lists.freeswitch.org) with a subject of ‘Help configuring external profile’. If there’s another to post a question, I’d be glad to do it.

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West
Sent: Thursday, May 14, 2009 1:27 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Help configuring external profile



Its guessing the IP you'll have to set it to the IP you want by opening up the sofia profile in sip_profiles/internal.xml and external.xml and specify the EXACT IP to use.


On another note please stop hijacking threads.



/b


On May 14, 2009, at 3:21 PM, Lars Zeb wrote:




How is FS getting 64.105.128.82 in ‘sofia status’ and how can I change that to 64.105.128.83?

Thanks, Lars


Brian West

brian@freeswitch.org (brian@freeswitch.org)




-- Meet us at ClueCon! http://www.cluecon.com

[brian at freeswitch.org]

Make sure you click new message and input the address... If you click reply.. change the subject and the body thats how you end up hijacking threads!

/b

On May 14, 2009, at 3:39 PM, Lars Zeb wrote:

[lfurrea at gmail.com]

Lars, just start a new message and type in the address instead of editing an existing message to the list.

On Thu, May 14, 2009 at 2:39 PM, Lars Zeb <larclap@yahoo.com (larclap@yahoo.com)> wrote: