VoIP Mailing List Archives

[simon at imaginator.com]

I have a pretty basic setup where many nokia sip clients (user agent:
Nokia-SIPUA) behind different home NATs need to connect to a publicly
accessible IP address running Freeswitch (freeswitch is then connected
to SIP trunks and either routes the calls between handsets or outbound
to the PSTN).

I'm wondering if anyone could share their configurations for getting
this to work *well*. I never really got it working well enough to be
considered production quality on Asterisk but was hoping that someone
had gone through some learning that would save me some debugging hours.

Ideally I'm looking for a combination of client configuration options
and server configuration that works well together - like should I use
the IP address of the server on the client or a DNS name? And whats the
best way to configure Freeswitch to make like easier for a random
sip-capable Nokia handset to connect to freeswitch.

Could anyone post working freeswitch configurations before I start on
what turned out to be an endless and ultimately unsuccessful pursuit in
Asterisk-land?

S.




--
Simon Tennant _____________________________________________

fixed: .uk +44 20 7043 6756 .de +49 89 420 955 854
mob: .uk +44 78 5335 6047 .de +49 17 8545 0880
xmpp: simon@buddycloud.com


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

[asannucci at gmail.com]

I have used a Nokia 6300i (SIP client) with asterisk without problems.

With FreeSWITCH i have some problem (i think NAT problem) but i can make and
receive calls.

When i will have time i will write a post in the wiki.

Bye


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

[simon at imaginator.com]

I would really appreciate this.

Some of the problems I have been unable to solve are:

* inbound callerid presentation. SIP inbound to nokia have "0123456"
(quotes included) instead of just a number that would then be matched
with a phone book entry to display the name of the caller.
* random call drop-outs (am debugging on the wifi ap at the moment)
* intermittent NAT one-way audio problems

S.

bakko wrote:

[asannucci at gmail.com]

I just installing FS in my new server. When i can make tests y will write
you.
Regards


_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

[wasim at convergence.pk]

On Sun, May 24, 2009 at 8:17 PM, bakko <asannucci@gmail.com (asannucci@gmail.com)> wrote:

[simon at imaginator.com]

...actually it's not "quite simple". Nokia handsets have a myriad of
other options that help fine tune things like STUN server resolution and
are only editable after installing some nokia supplied software.

We've gone through all those steps and still calls will fail for odd
reasons or more than one handset cannot access another handset behind
the same NAT. Or handsets will have STUN resolution problems or
caller-id problems.

/me wishes SNOM made mobiles.

S.

Wasim Baig wrote:

[wasim at convergence.pk]

On Mon, May 25, 2009 at 4:13 PM, Simon Tennant <simon@imaginator.com (simon@imaginator.com)> wrote:

[asannucci at gmail.com]

Thank you, but with nokia 6300i i have to configure manualy the xml configuration file and then upload it tu my cellphone Regards