VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
View previous topic :: View next topic |
Author |
Message |
shaheryarkh at googlem... Guest
|
Posted: Wed Jun 10, 2009 5:51 am Post subject: [Freeswitch-users] [Freeswitch-dev] mod_skypiax (Skype Endpo |
|
|
I am not using 64bit CentOS 5.3, I have 32bit CentOS but with PAE enable kernel. I have heard 64bit ALSA drivers have bad sound issues, but never used it personally.
As for source code of my modifications, i made those change to develop a customized commercial solution for large European firm, so i would need their permissions to provide you the required official patch. Let me write them an offical request for this.
Thank you.
On Wed, Jun 10, 2009 at 3:47 PM, Giovanni Maruzzelli <gmaruzz@celliax.org (gmaruzz@celliax.org)> wrote:
Quote: | Ciao Muhammad,
first thanks a lot for sharing your experience and help us in making a
better software!
Quote: | From the name of the kernel, seems that you are using centos5.2 is this correct?
|
I just tried centos5.3 (64bit) with centosplus kernel, but no luck.
I'm now installing a centos5.2 (64), I will test it with centosplus
kernel and with its normal kernel.
BTW, I would like *really* a lot to have and integrate your addition
to the code (also if it needs some labor from me, no problem). Would
you like to send it to me, so I will integrate in the main trunk and
you don't have no more to maintain it? (so you can develop other cool
features for mod_skypiax )?
-giovanni
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 11:16 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)> wrote:
Quote: | Thanks. I didn't make any special arrangements for FS or Skypiax to work on
CentOS 5.3. I only enabled CentOS Plus yum repository and then install PAE
kernel with following commands,
root ~# yum update
root ~# yum install kernel-PAE
i installed PAE kernel just because i wanted to increase System RAM to 8GB
before i deploy it for production use, so i can double or even triple
Skypiax channels whenever i need so, without system or FS shutdown.
As far as a skypiax configuration is concerned, i did modified mod_skypiax.c
to add a couple of commands to dynamically add and remove Skypiax interfaces
in a running FS process. However, this code does not replaces or changes any
previous code. Other then that there is no significant change in
configuration steps. Though i did use mod_xml_curl to dynamically update
skypiax interface configuration in FS.
Thank you.
On Wed, Jun 10, 2009 at 2:37 PM, Giovanni Maruzzelli <gmaruzz@celliax.org (gmaruzz@celliax.org)>
wrote:
Quote: |
Ciao Muhammad!
What a good news!
Centos is the most stable and performing platform for FS, so I would
really love to test and document on the wiki how to have a stable
centos mod_skypiax installation.
I'll find out your kernel ( Kernel 2.6.18-92.1.22.el5.centos.plusPAE
), and begin to test. In the mean time, do you have any hint, special
procedure, etc you have done for having skypiax working well?
Please, please, please let be in contact!
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 8:33 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)> wrote:
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-dev mailing list
Freeswitch-dev@lists.freeswitch.org (Freeswitch-dev@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com) |
|
Back to top |
|
|
gmaruzz at celliax.org Guest
|
Posted: Wed Jun 10, 2009 7:29 am Post subject: [Freeswitch-users] [Freeswitch-dev] mod_skypiax (Skype Endpo |
|
|
Thanks a lot Muhammad,
and please let that firm know the advantages of having customizations
included into mainstream .
OK, I will try 32 bit too, and see if there is differences.
So, you started fom a fresh install of centos5.2, then you installed
the PAE kernel. Is this right?
Pay attention, because if you do an "yum update" now, it will install
the "128" kernel, no more the "92", and maybe this will break
something.....
Anyway, I'm investigating, and please let me know if you'll have
additional infos.
Hope to hear from you soon,
-giovanni
On Wed, Jun 10, 2009 at 12:47 PM, Muhammad
Shahzad<shaheryarkh@googlemail.com> wrote:
Quote: | I am not using 64bit CentOS 5.3, I have 32bit CentOS but with PAE enable
kernel. I have heard 64bit ALSA drivers have bad sound issues, but never
used it personally.
As for source code of my modifications, i made those change to develop a
customized commercial solution for large European firm, so i would need
their permissions to provide you the required official patch. Let me write
them an offical request for this.
Thank you.
On Wed, Jun 10, 2009 at 3:47 PM, Giovanni Maruzzelli <gmaruzz@celliax.org>
wrote:
Quote: |
Ciao Muhammad,
first thanks a lot for sharing your experience and help us in making a
better software!
Quote: | From the name of the kernel, seems that you are using centos5.2 is this
| correct?
I just tried centos5.3 (64bit) with centosplus kernel, but no luck.
I'm now installing a centos5.2 (64), I will test it with centosplus
kernel and with its normal kernel.
BTW, I would like *really* a lot to have and integrate your addition
to the code (also if it needs some labor from me, no problem). Would
you like to send it to me, so I will integrate in the main trunk and
you don't have no more to maintain it? (so you can develop other cool
features for mod_skypiax )?
-giovanni
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 11:16 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com> wrote:
Quote: | Thanks. I didn't make any special arrangements for FS or Skypiax to work
on
CentOS 5.3. I only enabled CentOS Plus yum repository and then install
PAE
kernel with following commands,
root ~# yum update
root ~# yum install kernel-PAE
i installed PAE kernel just because i wanted to increase System RAM to
8GB
before i deploy it for production use, so i can double or even triple
Skypiax channels whenever i need so, without system or FS shutdown.
As far as a skypiax configuration is concerned, i did modified
mod_skypiax.c
to add a couple of commands to dynamically add and remove Skypiax
interfaces
in a running FS process. However, this code does not replaces or changes
any
previous code. Other then that there is no significant change in
configuration steps. Though i did use mod_xml_curl to dynamically update
skypiax interface configuration in FS.
Thank you.
On Wed, Jun 10, 2009 at 2:37 PM, Giovanni Maruzzelli
<gmaruzz@celliax.org>
wrote:
Quote: |
Ciao Muhammad!
What a good news!
Centos is the most stable and performing platform for FS, so I would
really love to test and document on the wiki how to have a stable
centos mod_skypiax installation.
I'll find out your kernel ( Kernel 2.6.18-92.1.22.el5.centos.plusPAE
), and begin to test. In the mean time, do you have any hint, special
procedure, etc you have done for having skypiax working well?
Please, please, please let be in contact!
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 8:33 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com> wrote:
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com
Email: shaheryarkh@googlemail.com
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-dev mailing list
Freeswitch-dev@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com
Email: shaheryarkh@googlemail.com
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org |
|
Back to top |
|
|
shaheryarkh at googlem... Guest
|
Posted: Wed Jun 10, 2009 7:30 am Post subject: [Freeswitch-users] [Freeswitch-dev] mod_skypiax (Skype Endpo |
|
|
I am glad to share the patch to enable dynamic Skypiax interfaces in FS. Please do note that however, that i started working on it on May 22, 2009. So any officaily changes made to mod_skypiax.c since then will not appear in it and will be lost if you apply this patch blindly.
I request Giovanni Maruzzelli to carefully merge this patch in main stream code before committing it to FS SVN.
Thank you.
On Wed, Jun 10, 2009 at 4:47 PM, Muhammad Shahzad <shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)> wrote:
Quote: | I am not using 64bit CentOS 5.3, I have 32bit CentOS but with PAE enable kernel. I have heard 64bit ALSA drivers have bad sound issues, but never used it personally.
As for source code of my modifications, i made those change to develop a customized commercial solution for large European firm, so i would need their permissions to provide you the required official patch. Let me write them an offical request for this.
Thank you.
On Wed, Jun 10, 2009 at 3:47 PM, Giovanni Maruzzelli <gmaruzz@celliax.org (gmaruzz@celliax.org)> wrote:
Quote: | Ciao Muhammad,
first thanks a lot for sharing your experience and help us in making a
better software!
Quote: | From the name of the kernel, seems that you are using centos5.2 is this correct?
|
I just tried centos5.3 (64bit) with centosplus kernel, but no luck.
I'm now installing a centos5.2 (64), I will test it with centosplus
kernel and with its normal kernel.
BTW, I would like *really* a lot to have and integrate your addition
to the code (also if it needs some labor from me, no problem). Would
you like to send it to me, so I will integrate in the main trunk and
you don't have no more to maintain it? (so you can develop other cool
features for mod_skypiax )?
-giovanni
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 11:16 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)> wrote:
Quote: | Thanks. I didn't make any special arrangements for FS or Skypiax to work on
CentOS 5.3. I only enabled CentOS Plus yum repository and then install PAE
kernel with following commands,
root ~# yum update
root ~# yum install kernel-PAE
i installed PAE kernel just because i wanted to increase System RAM to 8GB
before i deploy it for production use, so i can double or even triple
Skypiax channels whenever i need so, without system or FS shutdown.
As far as a skypiax configuration is concerned, i did modified mod_skypiax.c
to add a couple of commands to dynamically add and remove Skypiax interfaces
in a running FS process. However, this code does not replaces or changes any
previous code. Other then that there is no significant change in
configuration steps. Though i did use mod_xml_curl to dynamically update
skypiax interface configuration in FS.
Thank you.
On Wed, Jun 10, 2009 at 2:37 PM, Giovanni Maruzzelli <gmaruzz@celliax.org (gmaruzz@celliax.org)>
wrote:
Quote: |
Ciao Muhammad!
What a good news!
Centos is the most stable and performing platform for FS, so I would
really love to test and document on the wiki how to have a stable
centos mod_skypiax installation.
I'll find out your kernel ( Kernel 2.6.18-92.1.22.el5.centos.plusPAE
), and begin to test. In the mean time, do you have any hint, special
procedure, etc you have done for having skypiax working well?
Please, please, please let be in contact!
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 8:33 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)> wrote:
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-dev mailing list
Freeswitch-dev@lists.freeswitch.org (Freeswitch-dev@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com) |
|
Back to top |
|
|
gmaruzz at celliax.org Guest
|
Posted: Wed Jun 10, 2009 7:34 am Post subject: [Freeswitch-users] [Freeswitch-dev] mod_skypiax (Skype Endpo |
|
|
Ciao Muhammad,
you're faster than light !
the patch will be integrated very soon, I'll let you know when I'm done it.
Keep enhancements, patches, bug fixes, etc flowing!
thanks again, and thanks to the firm that so quickly understood and
authorized you,
-giovanni
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 2:29 PM, Muhammad
Shahzad<shaheryarkh@googlemail.com> wrote:
Quote: | I am glad to share the patch to enable dynamic Skypiax interfaces in FS.
Please do note that however, that i started working on it on May 22, 2009.
So any officaily changes made to mod_skypiax.c since then will not appear in
it and will be lost if you apply this patch blindly.
I request Giovanni Maruzzelli to carefully merge this patch in main stream
code before committing it to FS SVN.
Thank you.
On Wed, Jun 10, 2009 at 4:47 PM, Muhammad Shahzad
<shaheryarkh@googlemail.com> wrote:
Quote: |
I am not using 64bit CentOS 5.3, I have 32bit CentOS but with PAE enable
kernel. I have heard 64bit ALSA drivers have bad sound issues, but never
used it personally.
As for source code of my modifications, i made those change to develop a
customized commercial solution for large European firm, so i would need
their permissions to provide you the required official patch. Let me write
them an offical request for this.
Thank you.
On Wed, Jun 10, 2009 at 3:47 PM, Giovanni Maruzzelli <gmaruzz@celliax.org>
wrote:
Quote: |
Ciao Muhammad,
first thanks a lot for sharing your experience and help us in making a
better software!
Quote: | From the name of the kernel, seems that you are using centos5.2 is this
| correct?
I just tried centos5.3 (64bit) with centosplus kernel, but no luck.
I'm now installing a centos5.2 (64), I will test it with centosplus
kernel and with its normal kernel.
BTW, I would like *really* a lot to have and integrate your addition
to the code (also if it needs some labor from me, no problem). Would
you like to send it to me, so I will integrate in the main trunk and
you don't have no more to maintain it? (so you can develop other cool
features for mod_skypiax )?
-giovanni
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 11:16 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com> wrote:
Quote: | Thanks. I didn't make any special arrangements for FS or Skypiax to
work on
CentOS 5.3. I only enabled CentOS Plus yum repository and then install
PAE
kernel with following commands,
root ~# yum update
root ~# yum install kernel-PAE
i installed PAE kernel just because i wanted to increase System RAM to
8GB
before i deploy it for production use, so i can double or even triple
Skypiax channels whenever i need so, without system or FS shutdown.
As far as a skypiax configuration is concerned, i did modified
mod_skypiax.c
to add a couple of commands to dynamically add and remove Skypiax
interfaces
in a running FS process. However, this code does not replaces or
changes any
previous code. Other then that there is no significant change in
configuration steps. Though i did use mod_xml_curl to dynamically
update
skypiax interface configuration in FS.
Thank you.
On Wed, Jun 10, 2009 at 2:37 PM, Giovanni Maruzzelli
<gmaruzz@celliax.org>
wrote:
Quote: |
Ciao Muhammad!
What a good news!
Centos is the most stable and performing platform for FS, so I would
really love to test and document on the wiki how to have a stable
centos mod_skypiax installation.
I'll find out your kernel ( Kernel 2.6.18-92.1.22.el5.centos.plusPAE
), and begin to test. In the mean time, do you have any hint, special
procedure, etc you have done for having skypiax working well?
Please, please, please let be in contact!
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 8:33 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com> wrote:
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com
Email: shaheryarkh@googlemail.com
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-dev mailing list
Freeswitch-dev@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com
Email: shaheryarkh@googlemail.com
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com
Email: shaheryarkh@googlemail.com
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org |
|
Back to top |
|
|
shaheryarkh at googlem... Guest
|
Posted: Wed Jun 10, 2009 8:04 am Post subject: [Freeswitch-users] [Freeswitch-dev] mod_skypiax (Skype Endpo |
|
|
You are welcome.
Let me elaborate my setup here,
I have two machines, one for development, this is basically my lenovo 3000 N200 laptop, it has following specs,
1. Intel 1.6 GHz with 1GB RAM.
2. CentOS 5.3 with Kernel 2.6.18-128.1.6.el5.
3. FS SVN revision Revision ID 13613.
root ~# uname -a
Linux localhost.localdomain 2.6.18-128.1.6.el5 #1 SMP Wed Apr 1 09:19:18 EDT 2009 i686 i686 i386 GNU/Linux
root ~# cat /etc/issue
CentOS release 5.3 (Final)
Kernel \r on an \m
I am using this machine extensively for my development projects, including Skypiax. Yesterday i gave a presentation to the board of directors of the said firm, regarding existing status of my project. They tested the setup with 2-3 concurrent SIP -> SKYPIAX and then SKYPIAX to SIP calls without any problem. So, i believe this configuration works without any sound issue...!
The second machine is my test machine in a remote data center. I didn't prepare this machine, however, from SSH console i can see it has following specs,
1. Intel(R) Xeon(R) CPU E5405Â @ 2.00GHz with 4 GB of RAM.
2. CentOS 5.3 with kernel 2.6.18-92.1.22.el5.centos.plusPAE.
3. FS SVN revision Revision ID 13613.
root ~# uname -a
Linux localhost.localdomain 2.6.18-92.1.22.el5.centos.plusPAE #1 SMP Wed Dec 17 11:32:56 EST 2008 i686 i686 i386 GNU/Linux
root ~# cat /etc/issue
CentOS release 5.3 (Final)
Kernel \r on an \m
Each machine that i use always, get update with yum update command BEFORE i do anything else on it.
Hope this info will be helpful for you.
Can you give me step by step procedure of your testing that is producing this bad sound result? I would like to perform this test on my both machines and see if i get the same results too.
Thank you.
On Wed, Jun 10, 2009 at 6:33 PM, Giovanni Maruzzelli <gmaruzz@celliax.org (gmaruzz@celliax.org)> wrote:
Quote: | Ciao Muhammad,
you're faster than light !
the patch will be integrated very soon, I'll let you know when I'm done it.
Keep enhancements, patches, bug fixes, etc flowing!
thanks again, and thanks to the firm that so quickly understood and
authorized you,
-giovanni
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 2:29 PM, Muhammad
Shahzad<shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)> wrote:
Quote: | I am glad to share the patch to enable dynamic Skypiax interfaces in FS.
Please do note that however, that i started working on it on May 22, 2009.
So any officaily changes made to mod_skypiax.c since then will not appear in
it and will be lost if you apply this patch blindly.
I request Giovanni Maruzzelli to carefully merge this patch in main stream
code before committing it to FS SVN.
Thank you.
On Wed, Jun 10, 2009 at 4:47 PM, Muhammad Shahzad
<shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)> wrote:
Quote: |
I am not using 64bit CentOS 5.3, I have 32bit CentOS but with PAE enable
kernel. I have heard 64bit ALSA drivers have bad sound issues, but never
used it personally.
As for source code of my modifications, i made those change to develop a
customized commercial solution for large European firm, so i would need
their permissions to provide you the required official patch. Let me write
them an offical request for this.
Thank you.
On Wed, Jun 10, 2009 at 3:47 PM, Giovanni Maruzzelli <gmaruzz@celliax.org (gmaruzz@celliax.org)>
wrote:
Quote: |
Ciao Muhammad,
first thanks a lot for sharing your experience and help us in making a
better software!
Quote: | From the name of the kernel, seems that you are using centos5.2 is this
| correct?
I just tried centos5.3 (64bit) with centosplus kernel, but no luck.
I'm now installing a centos5.2 (64), I will test it with centosplus
kernel and with its normal kernel.
BTW, I would like *really* a lot to have and integrate your addition
to the code (also if it needs some labor from me, no problem). Would
you like to send it to me, so I will integrate in the main trunk and
you don't have no more to maintain it? (so you can develop other cool
features for mod_skypiax )?
-giovanni
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 11:16 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)> wrote:
Quote: | Thanks. I didn't make any special arrangements for FS or Skypiax to
work on
CentOS 5.3. I only enabled CentOS Plus yum repository and then install
PAE
kernel with following commands,
root ~# yum update
root ~# yum install kernel-PAE
i installed PAE kernel just because i wanted to increase System RAM to
8GB
before i deploy it for production use, so i can double or even triple
Skypiax channels whenever i need so, without system or FS shutdown.
As far as a skypiax configuration is concerned, i did modified
mod_skypiax.c
to add a couple of commands to dynamically add and remove Skypiax
interfaces
in a running FS process. However, this code does not replaces or
changes any
previous code. Other then that there is no significant change in
configuration steps. Though i did use mod_xml_curl to dynamically
update
skypiax interface configuration in FS.
Thank you.
On Wed, Jun 10, 2009 at 2:37 PM, Giovanni Maruzzelli
<gmaruzz@celliax.org (gmaruzz@celliax.org)>
wrote:
Quote: |
Ciao Muhammad!
What a good news!
Centos is the most stable and performing platform for FS, so I would
really love to test and document on the wiki how to have a stable
centos mod_skypiax installation.
I'll find out your kernel ( Kernel 2.6.18-92.1.22.el5.centos.plusPAE
), and begin to test. In the mean time, do you have any hint, special
procedure, etc you have done for having skypiax working well?
Please, please, please let be in contact!
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 8:33 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)> wrote:
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-dev mailing list
Freeswitch-dev@lists.freeswitch.org (Freeswitch-dev@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com) |
|
Back to top |
|
|
dujinfang at gmail.com Guest
|
Posted: Wed Jun 10, 2009 8:11 am Post subject: [Freeswitch-users] [Freeswitch-dev] mod_skypiax (Skype Endpo |
|
|
Glad to see the patch, I have been waiting for a long time
btw, I have changed the start scripts a bit to start X and skype separately, glad to share it if someone interested.
On Jun 10, 2009, at 8:29 PM, Muhammad Shahzad wrote: Quote: | I am glad to share the patch to enable dynamic Skypiax interfaces in FS. Please do note that however, that i started working on it on May 22, 2009. So any officaily changes made to mod_skypiax.c since then will not appear in it and will be lost if you apply this patch blindly.
I request Giovanni Maruzzelli to carefully merge this patch in main stream code before committing it to FS SVN.
Thank you.
On Wed, Jun 10, 2009 at 4:47 PM, Muhammad Shahzad <shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)> wrote:
Quote: | I am not using 64bit CentOS 5.3, I have 32bit CentOS but with PAE enable kernel. I have heard 64bit ALSA drivers have bad sound issues, but never used it personally.
As for source code of my modifications, i made those change to develop a customized commercial solution for large European firm, so i would need their permissions to provide you the required official patch. Let me write them an offical request for this.
Thank you.
On Wed, Jun 10, 2009 at 3:47 PM, Giovanni Maruzzelli <gmaruzz@celliax.org (gmaruzz@celliax.org)> wrote:
Quote: | Ciao Muhammad,
first thanks a lot for sharing your experience and help us in making a
better software!
Quote: | From the name of the kernel, seems that you are using centos5.2 is this correct?
|
I just tried centos5.3 (64bit) with centosplus kernel, but no luck.
I'm now installing a centos5.2 (64), I will test it with centosplus
kernel and with its normal kernel.
BTW, I would like *really* a lot to have and integrate your addition
to the code (also if it needs some labor from me, no problem). Would
you like to send it to me, so I will integrate in the main trunk and
you don't have no more to maintain it? (so you can develop other cool
features for mod_skypiax )?
-giovanni
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 11:16 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)> wrote:
Quote: | Thanks. I didn't make any special arrangements for FS or Skypiax to work on
CentOS 5.3. I only enabled CentOS Plus yum repository and then install PAE
kernel with following commands,
root ~# yum update
root ~# yum install kernel-PAE
i installed PAE kernel just because i wanted to increase System RAM to 8GB
before i deploy it for production use, so i can double or even triple
Skypiax channels whenever i need so, without system or FS shutdown.
As far as a skypiax configuration is concerned, i did modified mod_skypiax.c
to add a couple of commands to dynamically add and remove Skypiax interfaces
in a running FS process. However, this code does not replaces or changes any
previous code. Other then that there is no significant change in
configuration steps. Though i did use mod_xml_curl to dynamically update
skypiax interface configuration in FS.
Thank you.
On Wed, Jun 10, 2009 at 2:37 PM, Giovanni Maruzzelli <gmaruzz@celliax.org (gmaruzz@celliax.org)>
wrote:
Quote: |
Ciao Muhammad!
What a good news!
Centos is the most stable and performing platform for FS, so I would
really love to test and document on the wiki how to have a stable
centos mod_skypiax installation.
I'll find out your kernel ( Kernel 2.6.18-92.1.22.el5.centos.plusPAE
), and begin to test. In the mean time, do you have any hint, special
procedure, etc you have done for having skypiax working well?
Please, please, please let be in contact!
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 8:33 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)> wrote:
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-dev mailing list
Freeswitch-dev@lists.freeswitch.org (Freeswitch-dev@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com)
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
|
|
Back to top |
|
|
gmaruzz at celliax.org Guest
|
|
Back to top |
|
|
gmaruzz at celliax.org Guest
|
Posted: Wed Jun 10, 2009 8:39 am Post subject: [Freeswitch-users] [Freeswitch-dev] mod_skypiax (Skype Endpo |
|
|
On Wed, Jun 10, 2009 at 3:01 PM, Muhammad
Shahzad<shaheryarkh@googlemail.com> wrote:
Quote: | I am using this machine extensively for my development projects, including
Skypiax. Yesterday i gave a presentation to the board of directors of the
said firm, regarding existing status of my project. They tested the setup
with 2-3 concurrent SIP -> SKYPIAX and then SKYPIAX to SIP calls without any
problem. So, i believe this configuration works without any sound issue...!
|
Until some times ago, I was used to test with 32 bit centos, and I've
not seen problems (I tested with centos5.2).
Now I'm installing 5.3 32 bit, and I'll report on my results
On 64bit, on both centos5.2 and 5.3 I'm seeing problems with more than
6-10 concurrent calls, with less calls it was ok. BTW, it can be it is
a problem with my hard disk (that is seen as an ide instead than as a
SATA). I will check this too.
I'll report back soon on the various issues...
Quote: |
The second machine is my test machine in a remote data center. I didn't
prepare this machine, however, from SSH console i can see it has following
specs,
1. Intel(R) Xeon(R) CPU E5405 @ 2.00GHz with 4 GB of RAM.
2. CentOS 5.3 with kernel 2.6.18-92.1.22.el5.centos.plusPAE.
3. FS SVN revision Revision ID 13613.
root ~# uname -a
Linux localhost.localdomain 2.6.18-92.1.22.el5.centos.plusPAE #1 SMP Wed Dec
17 11:32:56 EST 2008 i686 i686 i386 GNU/Linux
root ~# cat /etc/issue
CentOS release 5.3 (Final)
Kernel \r on an \m
Each machine that i use always, get update with yum update command BEFORE i
do anything else on it.
Hope this info will be helpful for you.
Can you give me step by step procedure of your testing that is producing
this bad sound result? I would like to perform this test on my both machines
and see if i get the same results too.
Thank you.
On Wed, Jun 10, 2009 at 6:33 PM, Giovanni Maruzzelli <gmaruzz@celliax.org>
wrote:
Quote: |
Ciao Muhammad,
you're faster than light !
the patch will be integrated very soon, I'll let you know when I'm done
it.
Keep enhancements, patches, bug fixes, etc flowing!
thanks again, and thanks to the firm that so quickly understood and
authorized you,
-giovanni
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 2:29 PM, Muhammad
Shahzad<shaheryarkh@googlemail.com> wrote:
Quote: | I am glad to share the patch to enable dynamic Skypiax interfaces in FS.
Please do note that however, that i started working on it on May 22,
2009.
So any officaily changes made to mod_skypiax.c since then will not
appear in
it and will be lost if you apply this patch blindly.
I request Giovanni Maruzzelli to carefully merge this patch in main
stream
code before committing it to FS SVN.
Thank you.
On Wed, Jun 10, 2009 at 4:47 PM, Muhammad Shahzad
<shaheryarkh@googlemail.com> wrote:
Quote: |
I am not using 64bit CentOS 5.3, I have 32bit CentOS but with PAE
enable
kernel. I have heard 64bit ALSA drivers have bad sound issues, but
never
used it personally.
As for source code of my modifications, i made those change to develop
a
customized commercial solution for large European firm, so i would need
their permissions to provide you the required official patch. Let me
write
them an offical request for this.
Thank you.
On Wed, Jun 10, 2009 at 3:47 PM, Giovanni Maruzzelli
<gmaruzz@celliax.org>
wrote:
Quote: |
Ciao Muhammad,
first thanks a lot for sharing your experience and help us in making a
better software!
Quote: | From the name of the kernel, seems that you are using centos5.2 is
| this
correct?
I just tried centos5.3 (64bit) with centosplus kernel, but no luck.
I'm now installing a centos5.2 (64), I will test it with centosplus
kernel and with its normal kernel.
BTW, I would like *really* a lot to have and integrate your addition
to the code (also if it needs some labor from me, no problem). Would
you like to send it to me, so I will integrate in the main trunk and
you don't have no more to maintain it? (so you can develop other cool
features for mod_skypiax )?
-giovanni
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 11:16 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com> wrote:
Quote: | Thanks. I didn't make any special arrangements for FS or Skypiax to
work on
CentOS 5.3. I only enabled CentOS Plus yum repository and then
install
PAE
kernel with following commands,
root ~# yum update
root ~# yum install kernel-PAE
i installed PAE kernel just because i wanted to increase System RAM
to
8GB
before i deploy it for production use, so i can double or even
triple
Skypiax channels whenever i need so, without system or FS shutdown.
As far as a skypiax configuration is concerned, i did modified
mod_skypiax.c
to add a couple of commands to dynamically add and remove Skypiax
interfaces
in a running FS process. However, this code does not replaces or
changes any
previous code. Other then that there is no significant change in
configuration steps. Though i did use mod_xml_curl to dynamically
update
skypiax interface configuration in FS.
Thank you.
On Wed, Jun 10, 2009 at 2:37 PM, Giovanni Maruzzelli
<gmaruzz@celliax.org>
wrote:
Quote: |
Ciao Muhammad!
What a good news!
Centos is the most stable and performing platform for FS, so I
would
really love to test and document on the wiki how to have a stable
centos mod_skypiax installation.
I'll find out your kernel ( Kernel
2.6.18-92.1.22.el5.centos.plusPAE
), and begin to test. In the mean time, do you have any hint,
special
procedure, etc you have done for having skypiax working well?
Please, please, please let be in contact!
Sincerely,
Giovanni Maruzzelli
=========================================
www.celliax.org
via Pierlombardo 9, 20135 Milano
Italy
gmaruzz at celliax dot org
Cell : +39-347-2665618
Fax : +39-02-87390039
On Wed, Jun 10, 2009 at 8:33 AM, Muhammad
Shahzad<shaheryarkh@googlemail.com> wrote:
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com
Email: shaheryarkh@googlemail.com
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-dev mailing list
Freeswitch-dev@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com
Email: shaheryarkh@googlemail.com
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com
Email: shaheryarkh@googlemail.com
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com
Email: shaheryarkh@googlemail.com
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org |
|
Back to top |
|
|
dujinfang at gmail.com Guest
|
Posted: Wed Jun 10, 2009 9:17 am Post subject: [Freeswitch-users] [Freeswitch-dev] mod_skypiax (Skype Endpo |
|
|
On Jun 10, 2009, at 9:28 PM, Giovanni Maruzzelli wrote:
Quote: | On Wed, Jun 10, 2009 at 3:10 PM, dujinfang<dujinfang@gmail.com> wrote:
Quote: | btw, I have changed the start scripts a bit to start X and skype
separately,
glad to share it if someone interested.
|
I'm interested!
| ok in jira.
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|