VoIP Mailing List Archives

[max.bridgewater at gma...]

Hi get the following messages while running "make" on CentOS 5.3 (Of course after bootstrap and configure).

os_Linux_x86_64.s: Assembler messages:
os_Linux_x86_64.s:46: Error: bad register name `%rdi)'
os_Linux_x86_64.s:61: Error: bad register name `%rdi)'
os_Linux_x86_64.s:75: Error: bad register name `%rdi)'
os_Linux_x86_64.s:89: Error: bad register name `%rdi)'
make[10]: *** [os_Linux_x86_64.o] Error 1
make[9]: *** [export] Error 2
make[8]: *** [export] Error 2
make[7]: *** [export] Error 2
make[6]: *** [export] Error 2
make[5]: *** [/home/installs/fstrunk/libs/js/libjs.la] Error 2
make[4]: *** [all] Error 1
make[3]: *** [mod_spidermonkey-all] Error 1
make[2]: *** [all-recursive] Error 1

Any idea?

Max.

[brian at freeswitch.org]

Sounds like you have a hardware problem... I just built fine on 5.3 .. just make sure you don't do make -j on the first build.

/b

On Aug 10, 2009, at 1:51 PM, Max Bridgewater wrote:

[max.bridgewater at gma...]

Hmm too bad. It's a new VPS that i purchased. I'm not using make -j and l'm really sure what to do next.


On Mon, Aug 10, 2009 at 2:53 PM, Brian West <brian@freeswitch.org (brian@freeswitch.org)> wrote:

[mrene_lists at avgs.ca]

What arch? do a cat /proc/cpuinfo
Mathieu Rene
Avant-Garde Solutions Inc
Office: + 1 (514) 664-1044 x100
Cell: +1 (514) 664-1044 x200
mrene@avgs.ca (mrene@avgs.ca)








On 10-Aug-09, at 3:02 PM, Max Bridgewater wrote:

[max.bridgewater at gma...]

OK, here is the result of cat /proc/cpuinfo. What conclusion can i draw from this?


processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping        : 11
cpu MHz         : 2400.084
cache size      : 4096 KB
physical id     : 0
siblings        : 1
core id         : 0
cpu cores       : 1
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu tsc msr pae mce cx8 apic mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips        : 6005.15
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual

[brian at freeswitch.org]

and uname -a says?

/b

On Aug 10, 2009, at 2:20 PM, Max Bridgewater wrote:

[brian at freeswitch.org]

Sounds like a 64bit kernel and 32bit userspace maybe? Just
guessing... why oh why oh VPS providers have recicarnail interface
problems.

/b

On Aug 10, 2009, at 2:02 PM, Max Bridgewater wrote:

[max.bridgewater at gma...]

[brian at freeswitch.org]

I would call them and make sure they know they have something broken.

/b

On Aug 10, 2009, at 2:31 PM, Max Bridgewater wrote:

[max.bridgewater at gma...]

I have no idea what is wrong and therefore what to tell them. Without telling precisely what is wrong it would be easy for them to just categorize this as an application issue. Any recommendation?

On Mon, Aug 10, 2009 at 3:32 PM, Brian West <brian@freeswitch.org (brian@freeswitch.org)> wrote:

[brian at freeswitch.org]

Just be like everyone else... "Its broken, FIX IT!" ... Honestly I am not sure what to tell them... Could be a Xen bug... never know.

/b

On Aug 10, 2009, at 2:49 PM, Max Bridgewater wrote:

[mike at jerris.com]

Is this a 32 bit default compiler? Try CFLAGS=-m64 on the configure line.

On Aug 10, 2009, at 12:49 PM, Max Bridgewater <max.bridgewater@gmail.com (max.bridgewater@gmail.com)> wrote:

[max.bridgewater at gma...]

I suppose it is a 32 bit default compiler. When i compile with the suggested flag it fails right away. I've attached the log file for your curiosity. Meanwhil i've submited the issue to the hosting company. But i doubt anything meaningful or useful will come from there.

Cheers,
Max.


On Mon, Aug 10, 2009 at 4:01 PM, Michael Jerris <mike@jerris.com (mike@jerris.com)> wrote:

[brian at freeswitch.org]

What flags are you using?
/b

On Aug 10, 2009, at 7:01 PM, Max Bridgewater wrote:

[max.bridgewater at gma...]

CFLAGS=-m64 on the configure line.



On Mon, Aug 10, 2009 at 8:06 PM, Brian West <brian@freeswitch.org (brian@freeswitch.org)> wrote: