VoIP Mailing List Archives

[larclap at yahoo.com]

I am trying to make a test call to the FreeSwitch conference address, [url=sip:888@conference.freeswitch.org]sip:888@conference.freeswitch.org[/url] on a Bria softphone. However, it fails with a 404 Not found message.

I have struggled with this for a while. Is there something special I must do on the Bria to make this happen correctly?

Thanks, Lars

http://pastebin.freeswitch.org/10715

[brian at freeswitch.org]

Sounds like bria is sending the invite via the proxy which is your local FS box and NOT direct.

/b

On Oct 14, 2009, at 4:26 PM, Lars Zeb wrote:

[larclap at yahoo.com]

Brian,

Does this mean that Bria should be sending the invite directly to [url=sip:888@conference.freeswitch.org]sip:888@conference.freeswitch.org[/url] and the From address should be the address of the Bria itself rather than FS?

Lars

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West
Sent: Wednesday, October 14, 2009 8:55 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Outbound sip address call fails



Sounds like bria is sending the invite via the proxy which is your local FS box and NOT direct.


/b


On Oct 14, 2009, at 4:26 PM, Lars Zeb wrote:




I am trying to make a test call to the FreeSwitch conference address, [url=sip:888@conference.freeswitch.org]sip:888@conference.freeswitch.org[/url] on a Bria softphone. However, it fails with a 404 Not found message.



I have struggled with this for a while. Is there something special I must do on the Bria to make this happen correctly?



Thanks, Lars



http://pastebin.freeswitch.org/10715

[brian at freeswitch.org]

no clue it depends on how you have it configured. If you have an outbound proxy set it'll send all calls to the proxy. If not then most likely it will go direct to the destination.

/b

On Oct 15, 2009, at 12:00 AM, Lars Zeb wrote:

[larclap at yahoo.com]

I don’t think I have a proxy. It’s pretty standard installation.

Name Type Data State
=================================================================================================
internal profile sip:mod_sofia@192.168.10.29:5060 RUNNING (0)
internal-ipv6 profile sip:mod_sofia@[::1]:5060 RUNNING (0)
external profile sip:mod_sofia@192.168.10.29:5090 RUNNING (0)
flowroute gateway sip:55555@sip.flowroute.com REGED
192.168.10.29 alias internal ALIASED
=================================================================================================

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West
Sent: Thursday, October 15, 2009 6:55 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Outbound sip address call fails



no clue it depends on how you have it configured. If you have an outbound proxy set it'll send all calls to the proxy. If not then most likely it will go direct to the destination.


/b


On Oct 15, 2009, at 12:00 AM, Lars Zeb wrote:




Brian,



Does this mean that Bria should be sending the invite directly to [url=sip:888@conference.freeswitch.org]sip:888@conference.freeswitch.org[/url] and the From address should be the address of the Bria itself rather than FS?



Lars

[Russell.Mosemann at cu...]

Lars Zeb <larclap@yahoo.com> said:

[larclap at yahoo.com]

I don't think Bria is set to use a proxy.

In the SIP Account/Account tab, it is set to "Register with domain and
receive calls" and "Send outbound via" is set to use Domain rather than
"Proxy Address".

The Account ID is set to 1009@192.168.10.29, where the IP is the address of
FreeSwitch.

[Russell.Mosemann at cu...]

Lars Zeb <larclap@yahoo.com> said:

[larclap at yahoo.com]

Russell,

My settings in Bria are just like yours.

I captured the SIP trace from the Bria and it says it is using the
FreeSwitch as the Outbound Proxy. I am very confused.

I tried dial sip:echo@iptel.org. In the pastebin you can see that this
address came over to the cli as "echo". Is it Bria which is messing up, or
my FS configuration?

Where did Bria get the Contact info at lines 79 & 82? 192.168.10.11 is the
address of the softphone, so I don't think sip:1009@192.168.10.11 makes
sense.

http://pastebin.freeswitch.org/10723

Lars

[Russell.Mosemann at cu...]

Lars Zeb <larclap@yahoo.com> said:

[larclap at yahoo.com]

No, the checkbox is unchecked.

[Russell.Mosemann at cu...]

[larclap at yahoo.com]

Thanks, Russell, that did it. Works perfectly!