VoIP Mailing List Archives

[ineyaa at gmail.com]

Hi,

I installed the phonenix release, and changed IPv4, IPv6 addresses and SIP port. Directory and dialplan should be default ones.
My phones are able to register when using just IPv4, and I can call from one to another.

When I try the same thing with IPv6, the call to other phone fails with [USER_NOT_REGISTERED], however I'm able to call 9999 and hear MOH.
Here you can find the log: http://pastebin.freeswitch.org/10757
Freeswitch is running on 10.80.62.40/2000:2::1
phones are 2000:2::1001 and 2000:2::1002

Am I doing something wrong? Maybe I forgot to configure something, but I can't see what it is.

Any hints are appreciated.

[brian at freeswitch.org]

I think you just have it misconfigured because if ipv6 was broken I would have William and Jason jumping on me.

Can you post your xml configs for the profile please?


/b

On Oct 19, 2009, at 7:16 AM, ineya ineya wrote:

[ineyaa at gmail.com]

Here is internal.xml
http://pastebin.freeswitch.org/10766

and internal-ipv6.xml
http://pastebin.freeswitch.org/10767



On Mon, Oct 19, 2009 at 5:13 PM, Brian West <brian@freeswitch.org (brian@freeswitch.org)> wrote:

[brian at freeswitch.org]

And you're sure you have that IP on your interface?

William or Jason care to let me know if latest SVN IPv6 works for you?


/b

On Oct 19, 2009, at 3:51 PM, ineya ineya wrote:

[brian at freeswitch.org]

Bill has confirmed it works fine in latest trunk. So i'm not sure what exactly you're doing wrong can you provide me some debug output of what you're doing in your dialplan and the console debug?

/b

On Oct 19, 2009, at 3:51 PM, ineya ineya wrote:

[ineyaa at gmail.com]

IP should be OK:

[root@franta /opt/freeswitch]# ifconfig eth1
eth1      Link encap:Ethernet  HWaddr 00:4f:4e:62:ad:83
          inet addr:10.80.62.40  Bcast:10.80.62.255  Mask:255.255.255.0
          inet6 addr: 2000:2::1/32 Scope:Global
          inet6 addr: fe80::24f:4eff:fe62:ad83/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4310768 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2537585 errors:0 dropped:0 overruns:0 carrier:0
          collisions:114862 txqueuelen:1000
          RX bytes:1067582578 (1018.1 MiB)  TX bytes:616134369 (587.5 MiB)
          Interrupt:19 Base address:0x3400

Console debug: http://pastebin.freeswitch.org/10768

When I do "sofia status profile internal-ipv6", I can see both phones
as registered:
Call-ID:        9cb5faf2a052867b
User:           1007@franta.openstage.net
Contact:        1007 <sip:1007@[2000:2::1002]:5062;transport=udp>

but when it comes to connecting the call:

EXECUTE sofia/internal-ipv6/1006@franta.openstage.net
bridge(user/1007@franta.openstage.net)
2009-10-20 07:36:12.749270 [DEBUG] switch_ivr_originate.c:1027
variable string 0 = [presence_id=1007@franta.openstage.net]
2009-10-20 07:36:12.749270 [ERR] switch_ivr_originate.c:1510 Cannot
create outgoing channel of type [error] cause: [USER_NOT_REGISTERED]

@Bill: Can you share your IPv6 test config?

On Tue, Oct 20, 2009 at 3:05 AM, Brian West <brian@freeswitch.org> wrote:

[dwhite at olp.net]

On 20/10/09 07:53 +0200, ineya ineya wrote:

[ineyaa at gmail.com]

No, it's the same thing with /64 on both ends.
I tried to built SVN version and modified just IP addresses in
sip_profiles, but still can't call from one phone to another. It goes
straght to voicemail.

Is there a softphone, which you know works with freeswitch on IPv6?
Maybe the error is in phones I'm currently using.

On Tue, Oct 20, 2009 at 3:34 PM, Dan White <dwhite@olp.net> wrote:

[brian at freeswitch.org]

Well how are you trying to dial users?

/b

On Oct 20, 2009, at 9:16 AM, ineya ineya wrote:

[ineyaa at gmail.com]

By numbers, I have 2 numbers registered, so I dial "1006" or "1007".
This worked for IPv4, so I haven't thought about doing it differently for IPv6.
SIP messages looked OK to me - you just gave me an idea to compare SIP
messages for IPv4 and IPv6. I'll try that tommorow.


On Tue, Oct 20, 2009 at 4:21 PM, Brian West <brian@freeswitch.org> wrote:

[brian at freeswitch.org]

The defaults will NOT work with ipv6 out of the box because the
sofia_contact on the directory only looks at the internal profile NOT
the internal-ipv6 profile... open up the directory default and change
the sofia_contact to prepend the internal-ipv6/user@domain

/b

On Oct 20, 2009, at 10:21 AM, ineya ineya wrote:

[ineyaa at gmail.com]

Hmm, I didn't about this.

so in directory/default.xml I have:
<param name="dial-string"
value="{presence_id=${dialed_user}@${dialed_domain}}${sofia_contact(${dialed_user}@${dialed_domain})}"/>

and the modified version for IPv6 would be ?...
<param name="dial-string"
value="{presence_id=${dialed_user}@${dialed_domain}}${sofia_contact(internal-ipv6/${dialed_user}@${dialed_domain})}"/>



On Tue, Oct 20, 2009 at 5:34 PM, Brian West <brian@freeswitch.org> wrote:

[jason at jasonjgw.net]

ineya ineya <ineyaa@gmail.com> wrote:

[ineyaa at gmail.com]

Sort of. I have different error now:

2009-10-21 08:34:08.446939 [NOTICE] mod_sofia.c:1521 Pre-Answer
sofia/internal-ipv6/1006@franta.openstage.net!
2009-10-21 08:34:08.462967 [NOTICE] sofia.c:3925 Hangup
sofia/internal-ipv6/sip:1007@[2000:2::1002]:5062 [CS_CONSUME_MEDIA]
[INCOMPATIBLE_DESTINATION]

Here is the complete log:
http://pastebin.freeswitch.org/10782

[jason at jasonjgw.net]

ineya ineya <ineyaa@gmail.com> wrote: