VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
View previous topic :: View next topic |
Author |
Message |
ttroesch at dslextreme... Guest
|
Posted: Wed Oct 22, 2008 12:35 pm Post subject: [Freeswitch-users] Migration to FS |
|
|
Is there a document or recommended strategy on how to migrate from an
existing PBX system to FS? There are 2 T1-PRI lines used 24/7 (call
center) which can't be down for development or testing. The existing
system is InterTel.
I have a Sangoma A104D available with a tap ready to be installed. I'm
thinking (hoping?) that I can start by using it to monitor and/or record
calls without interfering with the InterTel.
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org |
|
Back to top |
|
|
msc at freeswitch.org Guest
|
Posted: Wed Oct 22, 2008 5:10 pm Post subject: [Freeswitch-users] Migration to FS |
|
|
On Wed, Oct 22, 2008 at 9:50 AM, Thomas Troesch <ttroesch@dslextreme.com (ttroesch@dslextreme.com)> wrote:
Quote: | Is there a document or recommended strategy on how to migrate from an
existing PBX system to FS? There are 2 T1-PRI lines used 24/7 (call
center) which can't be down for development or testing. The existing
system is InterTel.
|
Right now the OpenZAP stuff is still in development. I can't recommend putting it in a 24/7 can't-be-down-for-a-second kind of environment, at least not yet. We're getting there... Also, be sure to note which PRI protocol variant (aka "dialect") you are currently using. OZ supports DMS and 5ESS pretty well but NI2 is still a little iffy. Again, we're working on it but there are only so many hours in the day...
As for documentation, I'm almost positive that there aren't any docs extant that describe this process. I do know that Yossi N. has migrated from Asterisk to FreeSWITCH and has some experience. His presentation at ClueCon this year is available here:
http://files.freeswitch.org/cluecon_2008/Day_03.Presentation_11.Yossi_Neiman.1500kbps.mp4
However, I don't think we're at the point of how to rip out a legacy PBX and drop in FS. Not yet, but give us some time...
Quote: |
I have a Sangoma A104D available with a tap ready to be installed. I'm
thinking (hoping?) that I can start by using it to monitor and/or record
calls without interfering with the InterTel. |
I am interested in knowing if you can pull this off. I'd love to see this in action. I've got an A104D and I would be very interested in seeing someone get the HI-Z setup nailed down so that you can tap T1 lines. I'm particularly interested in sniffing d-chan traffic but I would also be interested in seeing someone use FS to create a call-recording system. (I know that Tri-Sys in NJ uses YATE + Sangoma for this, so I'm 100% sure that it is possible.)
If you feel like being a trailblazer then by all means go for it! Hop on IRC (#freeswitch and #openzap on irc.freenode.net) and pepper us all with questions. The only rules are "be cool" and "document it on the wiki if you learn something that wasn't already there."
-MC |
|
Back to top |
|
|
faraz.khan at emergen.biz Guest
|
Posted: Thu Oct 23, 2008 4:42 am Post subject: [Freeswitch-users] Migration to FS |
|
|
Quote: | However, I don't think we're at the point of how to rip out a legacy PBX
and drop in FS. Not yet, but give us some time...
|
Why not? You can simply use a Asterisk box for the Zap stuff. That is
how we do it. Works pretty well. Better still use E1/T1 gateways or POTS
gateways for analog lines, they are not that expensive anymore (if you
factor in the cost of the machine itself)
--
Faraz R Khan
www.emergen.biz
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org |
|
Back to top |
|
|
ttroesch at dslextreme... Guest
|
Posted: Thu Oct 23, 2008 5:18 am Post subject: [Freeswitch-users] Migration to FS |
|
|
Thank you for your input. I am clearly naive about what may be required,
and I need to get more details on what is currently in use.
The environment is not 'can't-be-down-for-a-second' - it has crashed
before - but that became an emergency. It is possible to plan for short
( 1/2 hour ) downtimes, but not easily.
Thank you for the link - it was interesting. I also listened to some talks
by Diana Cionoiu of YATES and Nenad Corbic from Sangoma that I found on
you-tube ( from Asterisk-Tag in Germany ). It helped by giving some
context for things I'm not familiar with.
I'll check in on the IRC when I have some questions.
On Wednesday 22 October 2008 15:01:34 Michael Collins wrote:
Quote: | On Wed, Oct 22, 2008 at 9:50 AM, Thomas Troesch
| <ttroesch@dslextreme.com>wrote:
Quote: | Quote: | Is there a document or recommended strategy on how to migrate from an
existing PBX system to FS? There are 2 T1-PRI lines used 24/7 (call
center) which can't be down for development or testing. The existing
system is InterTel.
|
Right now the OpenZAP stuff is still in development. I can't recommend
putting it in a 24/7 can't-be-down-for-a-second kind of environment, at
least not yet. We're getting there... Also, be sure to note which PRI
protocol variant (aka "dialect") you are currently using. OZ supports DMS
and 5ESS pretty well but NI2 is still a little iffy. Again, we're working
on it but there are only so many hours in the day...
As for documentation, I'm almost positive that there aren't any docs
extant that describe this process. I do know that Yossi N. has migrated
from Asterisk to FreeSWITCH and has some experience. His presentation at
ClueCon this year is available here:
http://files.freeswitch.org/cluecon_2008/Day_03.Presentation_11.Yossi_Nei
man.1500kbps.mp4
However, I don't think we're at the point of how to rip out a legacy PBX
and drop in FS. Not yet, but give us some time...
Quote: | I have a Sangoma A104D available with a tap ready to be installed. I'm
thinking (hoping?) that I can start by using it to monitor and/or
record calls without interfering with the InterTel.
|
I am interested in knowing if you can pull this off. I'd love to see this
in action. I've got an A104D and I would be very interested in seeing
someone get the HI-Z setup nailed down so that you can tap T1 lines. I'm
particularly interested in sniffing d-chan traffic but I would also be
interested in seeing someone use FS to create a call-recording system. (I
know that Tri-Sys in NJ uses YATE + Sangoma for this, so I'm 100% sure
that it is possible.)
If you feel like being a trailblazer then by all means go for it! Hop on
IRC (#freeswitch and #openzap on irc.freenode.net) and pepper us all with
questions. The only rules are "be cool" and "document it on the wiki if
you learn something that wasn't already there."
-MC
|
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org |
|
Back to top |
|
|
anthony.minessale at g... Guest
|
Posted: Thu Oct 23, 2008 7:58 am Post subject: [Freeswitch-users] Migration to FS |
|
|
Here are some more videos from the last ClueCon
http://files.freeswitch.org/cluecon_2008/
On Thu, Oct 23, 2008 at 5:03 AM, Thomas Troesch <ttroesch@dslextreme.com (ttroesch@dslextreme.com)> wrote:
Quote: | Thank you for your input. I am clearly naive about what may be required,
and I need to get more details on what is currently in use.
The environment is not 'can't-be-down-for-a-second' - it has crashed
before - but that became an emergency. It is possible to plan for short
( 1/2 hour ) downtimes, but not easily.
Thank you for the link - it was interesting. I also listened to some talks
by Diana Cionoiu of YATES and Nenad Corbic from Sangoma that I found on
you-tube ( from Asterisk-Tag in Germany ). It helped by giving some
context for things I'm not familiar with.
I'll check in on the IRC when I have some questions.
On Wednesday 22 October 2008 15:01:34 Michael Collins wrote:
Quote: | On Wed, Oct 22, 2008 at 9:50 AM, Thomas Troesch
| <ttroesch@dslextreme.com (ttroesch@dslextreme.com)>wrote:
Quote: | Quote: | Is there a document or recommended strategy on how to migrate from an
existing PBX system to FS? There are 2 T1-PRI lines used 24/7 (call
center) which can't be down for development or testing. The existing
system is InterTel.
|
Right now the OpenZAP stuff is still in development. I can't recommend
putting it in a 24/7 can't-be-down-for-a-second kind of environment, at
least not yet. We're getting there... Also, be sure to note which PRI
protocol variant (aka "dialect") you are currently using. OZ supports DMS
and 5ESS pretty well but NI2 is still a little iffy. Again, we're working
on it but there are only so many hours in the day...
As for documentation, I'm almost positive that there aren't any docs
extant that describe this process. I do know that Yossi N. has migrated
from Asterisk to FreeSWITCH and has some experience. His presentation at
ClueCon this year is available here:
http://files.freeswitch.org/cluecon_2008/Day_03.Presentation_11.Yossi_Nei
man.1500kbps.mp4
However, I don't think we're at the point of how to rip out a legacy PBX
and drop in FS. Not yet, but give us some time...
Quote: | I have a Sangoma A104D available with a tap ready to be installed. I'm
thinking (hoping?) that I can start by using it to monitor and/or
record calls without interfering with the InterTel.
|
I am interested in knowing if you can pull this off. I'd love to see this
in action. I've got an A104D and I would be very interested in seeing
someone get the HI-Z setup nailed down so that you can tap T1 lines. I'm
particularly interested in sniffing d-chan traffic but I would also be
interested in seeing someone use FS to create a call-recording system. (I
know that Tri-Sys in NJ uses YATE + Sangoma for this, so I'm 100% sure
that it is possible.)
If you feel like being a trailblazer then by all means go for it! Hop on
IRC (#freeswitch and #openzap on irc.freenode.net) and pepper us all with
questions. The only rules are "be cool" and "document it on the wiki if
you learn something that wasn't already there."
-MC
|
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org (Freeswitch-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
--
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
AIM: anthm
MSN:anthony_minessale@hotmail.com ([email]MSN%3Aanthony_minessale@hotmail.com[/email])
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com ([email]PAYPAL%3Aanthony.minessale@gmail.com[/email])
IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference
sip:888@conference.freeswitch.org ([email]sip%3A888@conference.freeswitch.org[/email])
iax:guest@conference.freeswitch.org/888
googletalk:conf+888@conference.freeswitch.org ([email]googletalk%3Aconf%2B888@conference.freeswitch.org[/email])
pstn:213-799-1400 |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|