VoIP Mailing List Archives

[fs_ask_sy at citromail.hu]

Hy!

I have tested several times so far the att_xfer function of the freeswitch, and I've found it unstable. I'm
using a similar code to the example at the freeswitch wiki, and sometimes a call isnt transfered.
The att_xfer works fine in the cases as I figured out from the log, when the switch_ivr_bridge comes
back with a "ending bridge by request from read function" message. When it comes back with a
"request from write function", the two channels dont get bridged together: they cant hear each other
form the other side, and they dont even realize that the other hangs up.
I have pasted some logs about this a week ago into paste bin, but if you wish, I could paste new logs
with the newest fs.
Could it has something with silence, because I think there are more failures when I dont talk into
the phones?
Im using latest fs, and sip phones without built in transfer.

Cheers,
Viktor

[brian at freeswitch.org]

What device are you using?

/b

On Nov 18, 2008, at 8:03 AM, x y wrote:

[fs_ask_sy at citromail.hu]

Datavox Ip-300, and X-Lite softphone for testing.

[brian at freeswitch.org]

Now I need to see the console logs with debug set. "console loglevel debug" or press F8, Also document the exact scenario and every step you take, every key you press.

/b

On Nov 18, 2008, at 9:04 AM, x y wrote:

[fs_ask_sy at citromail.hu]

Devices: IP-300 with 1007 registered
IP-300 with 1009 registered
X-Lite with 1011 registered

Situation where att_xfer success:
-Dial IP-300 with 6691007 from X-Lite (669 is just a prefix, assuring to execute my extension)
-1007 ringing, get the phone
-press *1 on 1007, then dial 1009 when the dialing wav is starting to play, while X-Lite plays hold music
-1009 (the other IP-300) ringing, get the phone
-1009 and 1007 bridged together, they can talk, then I hang up 1007
-1009 and 1011 bridged together, they can talk
-few secs later, I hang up 1009
-1011 hangs up too

Situation where att_xfer fails:
-Dial IP-300 with 6691007 from X-Lite (669 is just a prefix, assuring to execute my extension)
-1007 ringing, get the phone
-press *1 on 1007, then dial 1009 when the dialing wav is starting to play, while X-Lite plays hold music
-1009 (the other IP-300) ringing, get the phone
-1009 and 1007 bridged together, they can talk, then I hang up 1007
----------------------------different from here-----------------------------------------
-1009 silent, but not on hold, nor on hung up, 1011 stops playing waiting music, being silent too
-few secs later, I hang up 1009
-1011 doesnt react, so I hang up 1011 too

When the att_xfer went failure, I didnt make any noise. When it went ok, I spoke into all phones.
I dont know if it counts.

Logst added to pastebin.

Cheers,
Viktor

[brian at freeswitch.org]

You missed one thing..... the console log with debug.

/b


On Nov 18, 2008, at 9:57 AM, x y wrote:

[fs_ask_sy at citromail.hu]

And btw, sorry for my english... thinked and tought, in one sentence....if only my english teacher would saw this

[fs_ask_sy at citromail.hu]

I tought u thinked of these:

http://pastebin.freeswitch.org/6179
http://pastebin.freeswitch.org/6178

If not, please correct me.

Viktor

[fs_ask_sy at citromail.hu]

Hi!

I have tasted att_xfer with dtmf 0, 3 way transfer. Works pretty fine, there wasn't any failures. I put a log from that too into pastebin, in case you would need it.

http://pastebin.freeswitch.org/6194

Cheers,
Viktor

[anthony.minessale at g...]

can you re-post the failure example, it expired from the pastebin

On Wed, Nov 19, 2008 at 9:56 AM, x y <fs_ask_sy@citromail.hu (fs_ask_sy@citromail.hu)> wrote:

[fs_ask_sy at citromail.hu]

I've reposted them:
http://pastebin.freeswitch.org/6197
http://pastebin.freeswitch.org/6198

Failure has been added 3 times accedantly....sorry.

[anthony.minessale at g...]

please update to trunk and see if it works.


On Wed, Nov 19, 2008 at 10:24 AM, x y <fs_ask_sy@citromail.hu (fs_ask_sy@citromail.hu)> wrote:

[fs_ask_sy at citromail.hu]

Updated, tested, still the same. Need newer logs?

Cheers,
Viktor

[anthony.minessale at g...]

if latest trunk does not work
repost the log like before but also set TPORT_LOG=1 env var on your shell first
also press enter several times on the console right before you hangup
and type show channels at the cli once you hangup.
and remain on irc if you want me to fix this so i can ask you questions.


On Wed, Nov 19, 2008 at 10:49 AM, Anthony Minessale <anthony.minessale@gmail.com (anthony.minessale@gmail.com)> wrote:

[fs_ask_sy at citromail.hu]

I've done as you said.

http://pastebin.freeswitch.org/6220

I'll try to stay on IRC more.

Thx,
Viktor