mkn0014 at gmail.com
Guest
|
 Posted: Sun Jan 13, 2008 2:53 pm Post subject: [asterisk-users] Asterisk ports and CentOS firewall |
 |
|
Check this out:
http://www.voip-info.org/wiki-Asterisk+firewall+rules
dave cantera wrote:
| Quote: | ed,
this may be somewhat liberal but should do the trick...
daveC
-A RH-Firewall-1-INPUT -p tcp -m tcp --dport 69 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 69 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 5060 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 5061 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 5062 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 4569 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp --dport 5038 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 5036 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 5004 -j ACCEPT
#
-A RH-Firewall-1-INPUT -p icmp -m icmp --icmp-type any -j ACCEPT
-A RH-Firewall-1-INPUT -p ipv6-crypt -j REJECT
-A RH-Firewall-1-INPUT -p ipv6-auth -j REJECT
-A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp --dport 5353 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
Ed Nunez wrote:
| Quote: |
If I enable the firewall on my Server, which ports should I open for
Asterisk to work properly. Is it enough to just open the SIP ports?
|
|
|
|
Search
