VoIP Mailing List Archives

[astguy at gmail.com]

Hi,

I'm using zaptel-1.2.22.1 with asterisk-1.2.10 and following steps to
make zaptel working...

OS is gentoo linux 2006.1

Hardware:
---------

0000:05:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
Subsystem: Unknown device 8085:0003
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at b400
Memory at ff900000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2

- Compiled, installed zaptel
- Compiled, installed Asterisk

gigli ~ # modprobe zaptel

/var/log/messages:
Jan 16 15:42:31 gigli Zapata Telephony Interface Registered on major 196
Jan 16 15:42:31 gigli Zaptel Version: 1.2.22.1
Jan 16 15:42:31 gigli Zaptel Echo Canceller: KB1

gigli ~ # modprobe wcfxo

/var/log/messages:
Jan 16 15:42:33 gigli ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22
(level, low) -> IRQ 22
Jan 16 15:42:33 gigli wcfxo: DAA mode is 'FCC'
Jan 16 15:42:33 gigli Found a Wildcard FXO: Wildcard X101P

gigli # ztcfg -v
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'

1 error(s) detected
Asterisk log
-------------

[chan_zap.so] => (Zapata Telephony)
== Parsing '/etc/asterisk/zapata.conf': Found
Jan 16 15:43:30 WARNING[5415]: chan_zap.c:915 zt_open: Unable to open
'/dev/zap/channel': No such file or directory
Jan 16 15:43:30 ERROR[5415]: chan_zap.c:6861 mkintf: Unable to open
channel 1: No such file or directory
here = 0, tmp->channel = 1, channel = 1
Jan 16 15:43:30 ERROR[5415]: chan_zap.c:10288 setup_zap: Unable to
register channel '1'
Jan 16 15:43:30 WARNING[5415]: loader.c:414 __load_resource:
chan_zap.so: load_module failed, returning -1
Jan 16 15:43:30 WARNING[5415]: loader.c:554 load_modules: Loading
module chan_zap.so failed!


Zaptel File /etc/zaptel.conf:
-----------------------------

fxsks=1
loadzone = us
defaultzone=us


UDEV file /etc/udev/rules.d/50-udev.rules:
-----------------------------------------

# Asterisk Zaptel devices
KERNEL=="zapctl", NAME="zap/ctl"
KERNEL=="zaptimer", NAME="zap/timer"
KERNEL=="zapchannel", NAME="zap/channel"
KERNEL=="zappseudo", NAME="zap/pseudo"
KERNEL=="zap[0-9]*", NAME="zap/%n"

ZAPATA file:
-----------

gigli # cat /etc/asterisk/zapata.conf

[trunkgroups]

[channels]
context=default
switchtype=national
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks

usecallerid=yes
cidstart=ring
hidecallerid=no
callwaiting=yes
restrictcid=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=5.0
txgain=5.0

immediate=no
callerid=asrecieved
busydetect=yes
busycount=4
musiconhold=default

context=default
group=1

channel =>1



Can anyone give hint, what am I missing ?


-ag

[tzafrir.cohen at xorco...]

On Wed, Jan 16, 2008 at 03:55:08PM +0500, ast guy wrote:

[lists at minotaur.cc]

Make sure asterisk is in the "dialout" group in /etc/passwd

The default gentoo ebuild of zaptel creates /dev/zap/* with group dialout, and if you're using the gentoo ebuild of asterisk, it'll run as asterisk:asterisk, so you need to make sure asterisk is a member of the dialout goup otherwise it'll never be able to access /dev/zap/*

FWIW, as a fellow Gentoo user, 2006.1 is a bit dated, and you'd be well worth updating to 2007.0 if you can spare the time - it'll save you a lot of messing around with gcc versions etc. later down the line.

Regards,

Chris
--
C.M. Bagnall, Director, Minotaur I.T. Limited
For full contact details visit http://www.minotaur.it
This email is made from 100% recycled electrons

[walterwn at gmail.com]

create nodes and links /proc/zap
On Jan 16, 2008 3:39 PM, Chris Bagnall <lists at minotaur.cc> wrote:

[astguy at gmail.com]

there is no /proc/zap folder .. can you tell how can I create /dev
nodes. I have tested the same configurations on FC5 and these device
links were created ...

drwxr-xr-x 2 root root 160 Jan 17 10:59 .
drwxr-xr-x 13 root root 3640 Jan 17 11:00 ..
crw------- 1 root root 196, 1 Jan 17 10:59 1
crw------- 1 root root 196, 254 Jan 17 10:59 channel
crw------- 1 root root 196, 0 Jan 17 10:59 ctl
crw------- 1 root root 196, 255 Jan 17 10:59 pseudo
crw------- 1 root root 196, 253 Jan 17 10:59 timer
crw-rw---- 1 root root 196, 250 Jan 17 10:59 transcode

-ag

[tzafrir.cohen at xorco...]

On Wed, Jan 16, 2008 at 10:09:54PM -0500, Walter Willis wrote: