Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] Incoming calls on PSTN trunk not disconnect


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
prashant.ruby at gmail...
Guest





PostPosted: Thu Jan 17, 2008 1:26 am    Post subject: [asterisk-users] Incoming calls on PSTN trunk not disconnect Reply with quote

I am trying to configure Asterisk for BSNL, india network.
I have successfully configured it for outgoing calls.

When any outside number make any call to trunk then it receives the call
properly but when the call is disconnected by inside extension then outside
phone does not get a busy tone.

Asterisk incoming call log:

-- Executing [s at incoming:2] Dial("Zap/4-1", "Zap/1") in new stack
-- Called 1
-- Zap/1-1 is ringing
-- Zap/1-1 is ringing
[Jan 17 11:53:54] WARNING[5030]: chan_zap.c:4153 zt_handle_event: Didn't
finish Caller-ID spill. Cancelling.
-- Zap/1-1 is ringing
-- Zap/1-1 is ringing
-- Zap/1-1 is ringing
-- Zap/1-1 answered Zap/4-1
-- Native bridging Zap/4-1 and Zap/1-1
-- Hungup 'Zap/1-1'
== Spawn extension (incoming, s, 2) exited non-zero on 'Zap/4-1'
-- Hungup 'Zap/4-1'
My system information is as follows:

OS and components:

CentOS 4.5
Asterisk 1.4.17
Zaptel 1.4.7.1
Libpri 1.4.3

extensions.conf
[globals]
OUTBOUNDTRUNK=Zap/4

[incoming]
; incoming calls from FXO
exten => s,1,Dial(Zap/1)

[outbound-dialing]
;Outbound dialing
exten => _X.,1,Verbose(1|Outside number|${EXTEN})
exten => _X.,n,Dial(${OUTBOUNDTRUNK}/${EXTEN})

[phones]
include => outbound-dialing

zaptel.conf file:

fxsks=4
fxoks=1
loadzone=in
defaultzone=in

# /sbin/ztcfg -vv this linux command gives following output:

Zaptel Version: 1.4.7.1
Echo Canceller: MG2
Configuration
======================

Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

2 channels to configure.

zapata.conf file looks like:
[trunkgroups]
; Define

[channels]
;hardware channels
;default
usecallerid=yes
hidecallerid=no
echocancel=yes
echotraining=yes
callwaiting=no
immediate=no
cidstart=ring
cidsignalling=dtmf

;define channels
signalling=fxo_ks ;Use FXO signaling for FXS channel
context=phones
channel => 1

signalling=fxs_ks ;Use FXS signaling for FXO channel
context=incoming
channel => 4
Any sort of help will be appreciated.

Thanks in advance

Prashant
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080117/2fe8e136/attachment.htm
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services