| View previous topic :: View next topic |
| Author |
Message |
lists at wildgooses.com
Guest
|
 Posted: Tue Feb 05, 2008 3:10 pm Post subject: [asterisk-users] How to hookup to cell phone for outbound ca |
 |
|
Hi
I need a small PBX for use on the move. This means that outbound calls
will need to be made over the cell phone network.
Assuming a small hardware PBX with a spare mini-PCI slot or a USB slot
then what hardware options do I have to get an outbound cellular
channel? Options need to be rock solid, so no bluetooth to a cell phone
kind of solutions need apply.
Can any of the 3G usb devices out there offer outbound analogue calls
(ie other than via voip)?
Cheers
Ed W |
|
| Back to top |
|
 |
drew at oanda.com
Guest
|
| Posted: Tue Feb 05, 2008 3:37 pm Post subject: [asterisk-users] How to hookup to cell phone for outbound ca |
|
|
Ed W wrote:
| Quote: | Hi
I need a small PBX for use on the move. This means that outbound calls
will need to be made over the cell phone network.
Assuming a small hardware PBX with a spare mini-PCI slot or a USB slot
then what hardware options do I have to get an outbound cellular
channel? Options need to be rock solid, so no bluetooth to a cell phone
kind of solutions need apply.
Can any of the 3G usb devices out there offer outbound analogue calls
(ie other than via voip)?
Cheers
Ed W
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
How about http://www.mgamble.ca/oss/iphone_asterisk/ ?
regards,
Drew
--
Drew Gibson
Systems Administrator
OANDA Corporation
www.oanda.com |
|
| Back to top |
|
|
erikerik at gmail.com
Guest
|
| Posted: Tue Feb 05, 2008 3:56 pm Post subject: [asterisk-users] How to hookup to cell phone for outbound ca |
|
|
On Feb 5, 2008 2:37 PM, Drew Gibson <drew at oanda.com> wrote:
Hah! Cool, but quite ridiculous.  |
|
| Back to top |
|
|
samtam888 at gmail.com
Guest
|
| Posted: Tue Feb 05, 2008 7:49 pm Post subject: [asterisk-users] How to hookup to cell phone for outbound ca |
|
|
Well I think you need a GSM Gateway
You can find some info on cyber-telecom.net
For a cheap option you can try a CT-G1000 or CT-G2000 and then plug it in a
X100P or something similar then it would be very economical.
Sam
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ed W
Sent: Wednesday, February 06, 2008 4:11 AM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] How to hookup to cell phone for outbound calls?
Hi
I need a small PBX for use on the move. This means that outbound calls
will need to be made over the cell phone network.
Assuming a small hardware PBX with a spare mini-PCI slot or a USB slot
then what hardware options do I have to get an outbound cellular
channel? Options need to be rock solid, so no bluetooth to a cell phone
kind of solutions need apply.
Can any of the 3G usb devices out there offer outbound analogue calls
(ie other than via voip)?
Cheers
Ed W
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
| Back to top |
|
|
stoffell at gmail.com
Guest
|
| Posted: Wed Feb 06, 2008 1:41 pm Post subject: [asterisk-users] How to hookup to cell phone for outbound ca |
|
|
On Feb 5, 2008 9:10 PM, Ed W <lists at wildgooses.com> wrote:
| Quote: | I need a small PBX for use on the move. This means that outbound calls
will need to be made over the cell phone network.
|
What's your budget?
You could use voiceblue's SIP/GSM gateway (exists in 2 or 4 channels),
it connects to your internal NIC of your "small pbx" (like in:
laptop?) or by using a switch..
cheers,
stoffell |
|
| Back to top |
|
|
lists at wildgooses.com
Guest
|
| Posted: Wed Feb 06, 2008 7:14 pm Post subject: [asterisk-users] How to hookup to cell phone for outbound ca |
|
|
Sam Tam wrote:
| Quote: | Well I think you need a GSM Gateway
You can find some info on cyber-telecom.net
For a cheap option you can try a CT-G1000 or CT-G2000 and then plug it in a
X100P or something similar then it would be very economical.
|
Yep, this is the kind of thing I am after, except my hardware PBX has
limited connectivity and ideally I want a USB or ethernet hookup to the
box..?
The scenario is basically a small commercial PBX (small form factor)
which can be supplied with IP phones and will talk out via a cell phone
channel (or via a satellite phone if that's the only option available,
but this is out of scope of this question). So basically I want to
figure out some options to hookup a GSM cellphone channel to a small
form factor asterisk PBX which has limited expansion options (ethernet,
USB and mini-PCI - although prefer to use the later for a wifi card...)
I only need a single channel of GSM right now (and a single SIM)
Any thoughts? Remember this needs to be production quality and priced
sensible for a commodity market
Thanks for pointers to hardware
Ed W |
|
| Back to top |
|
|
mgraves at mstvp.com
Guest
|
| Posted: Wed Feb 06, 2008 7:26 pm Post subject: [asterisk-users] How to hookup to cell phone for outbound ca |
|
|
On Thu, 07 Feb 2008 00:14:07 +0000, Ed W wrote:
| Quote: | Sam Tam wrote:
| Quote: | Well I think you need a GSM Gateway
You can find some info on cyber-telecom.net
For a cheap option you can try a CT-G1000 or CT-G2000 and then plug it in a
X100P or something similar then it would be very economical.
|
Yep, this is the kind of thing I am after, except my hardware PBX has
limited connectivity and ideally I want a USB or ethernet hookup to the
box..?
The scenario is basically a small commercial PBX (small form factor)
which can be supplied with IP phones and will talk out via a cell phone
channel (or via a satellite phone if that's the only option available,
but this is out of scope of this question). So basically I want to
figure out some options to hookup a GSM cellphone channel to a small
form factor asterisk PBX which has limited expansion options (ethernet,
USB and mini-PCI - although prefer to use the later for a wifi card...)
I only need a single channel of GSM right now (and a single SIM)
Any thoughts? Remember this needs to be production quality and priced
sensible for a commodity market
Thanks for pointers to hardware
|
Then use a Sipura SPA-3000 instead of the X100 card. It's a
freestanding FXO/FXS <> SIP interface. Well proven. Not overly
expensive.
Hardware based SIP<>GSM gateways seem to start at around $250 US. See
www.voip-info.org for a list.
Michael
--
Michael Graves
mgraves<at>mstvp.com
blog.mgraves.org
o713-861-4005
c713-201-1262
sip:mjgraves at pixelpower.onsip.com
skype mjgraves
fwd 54245 |
|
| Back to top |
|
|
samtam888 at gmail.com
Guest
|
| Posted: Thu Feb 07, 2008 6:06 am Post subject: [asterisk-users] How to hookup to cell phone for outbound ca |
|
|
Well alternatively you can look up straight forward gsm voip gateway.
Like CT-375
Sam
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michael Graves
Sent: Thursday, February 07, 2008 8:27 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] How to hookup to cell phone for outbound
calls?
On Thu, 07 Feb 2008 00:14:07 +0000, Ed W wrote:
| Quote: | Sam Tam wrote:
| Quote: | Well I think you need a GSM Gateway
You can find some info on cyber-telecom.net
For a cheap option you can try a CT-G1000 or CT-G2000 and then plug it in
|
|
a
| Quote: | | Quote: | X100P or something similar then it would be very economical.
|
Yep, this is the kind of thing I am after, except my hardware PBX has
limited connectivity and ideally I want a USB or ethernet hookup to the
box..?
The scenario is basically a small commercial PBX (small form factor)
which can be supplied with IP phones and will talk out via a cell phone
channel (or via a satellite phone if that's the only option available,
but this is out of scope of this question). So basically I want to
figure out some options to hookup a GSM cellphone channel to a small
form factor asterisk PBX which has limited expansion options (ethernet,
USB and mini-PCI - although prefer to use the later for a wifi card...)
I only need a single channel of GSM right now (and a single SIM)
Any thoughts? Remember this needs to be production quality and priced
sensible for a commodity market
Thanks for pointers to hardware
|
Then use a Sipura SPA-3000 instead of the X100 card. It's a
freestanding FXO/FXS <> SIP interface. Well proven. Not overly
expensive.
Hardware based SIP<>GSM gateways seem to start at around $250 US. See
www.voip-info.org for a list.
Michael
--
Michael Graves
mgraves<at>mstvp.com
blog.mgraves.org
o713-861-4005
c713-201-1262
sip:mjgraves at pixelpower.onsip.com
skype mjgraves
fwd 54245
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
| Back to top |
|
|
|
Search
