VoIP Mailing List Archives

[techyjt at bellsouth.net]

I have followed the instructions in Asterisk The Definitive Guide 4th edition. Once I load DAHDI I run the dahdi show channels command and get no such command. I have setup all the conf files. I compiled DADHI prior to Asterisk.


Any ideas?

[raubvogel at gmail.com]

On Thu, Dec 5, 2013 at 8:41 PM, Joseph Towery <techyjt@bellsouth.net> wrote:

[EWieling at nyigc.com]

Run "dahdi_cfg -vvv" to verify DAHDI kernel modules are loaded and configured correctly.

Verify chan_dahdi.so is built and located in your Asterisk modules directory, usually /usr/lib/asterisk/modules/ If there is no chan_dahdi.so chances are you built Asterisk before installing DAHDI. Rerun ./configure or run "make distclean" and then rerun ./configure to rebuild Asterisk.

Use the command "module show like dahdi" in the Asterisk CLI to verify chan_dahdi.so is loaded. If it isn't loaded then chances are you have a chan_dahdi.conf issue.


-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Joseph Towery
Sent: Thursday, December 05, 2013 8:41 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] "dahdi show channels" no such command

I have followed the instructions in Asterisk The Definitive Guide 4th edition. Once I load DAHDI I run the dahdi show channels command and get no such command. I have setup all the conf files. I compiled DADHI prior to Asterisk.

Any ideas?





--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[techyjt at bellsouth.net]

Here are the commands


asteriskpbx@pbxmain:/etc/dahdi$ dahdi_cfg -vvv
DAHDI Tools Version - 2.7.0.2


DAHDI Version: 2.7.0.1
Echo Canceller(s): MG2
Configuration
======================




Channel map:


Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 06)
Channel 07: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 0


8 channels to configure.


Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2
Setting echocan for channel 5 to mg2
Setting echocan for channel 6 to mg2
Setting echocan for channel 7 to mg2
Setting echocan for channel 8 to mg2
asteriskpbx@pbxmain:/etc/dahdi$






pbxmain*CLI> module show like chan_dahdi.so
Module Description Use Count
chan_dahdi.so DAHDI Telephony Driver w/PRI 0

1 modules loaded

[tzafrir.cohen at xorco...]

On Thu, Dec 05, 2013 at 07:19:56PM -0800, Joseph Towery wrote:

[techyjt at bellsouth.net]

[tzafrir.cohen at xorco...]

On Wed, Dec 11, 2013 at 09:22:13AM -0800, Joseph Towery wrote:

[techyjt at bellsouth.net]

From: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
To: asterisk-users@lists.digium.com
Sent: Wednesday, December 11, 2013 1:37 PM
Subject: Re: [asterisk-users] "dahdi show channels" no such command


On Wed, Dec 11, 2013 at 09:22:13AM -0800, Joseph Towery wrote:

[tzafrir.cohen at xorco...]

On Wed, Dec 11, 2013 at 12:09:17PM -0800, Joseph Towery wrote: