VoIP Mailing List Archives

[motty.cruz at gmail.com]

Hi all, 
I'm having issues with overwrite caller id, when I call someone my caller id should be "mycompanyinc" but instead my id shows up as my extension number 101. 


this is what i have in sip.conf
[101]
type=friend
context=sipphones
call-limit=99
callerid="iuser 101"
disallow=all
allow=ulaw
allow=alaw
username=101
secret=Passwd
dtmfmode=rfc2833
host=dynamic
mailbox=101@default
nat=yes
canreinvite=no





this is what i have in extensions.conf
[outbound]
exten => _91NXXNXXXXXX,1,Set(CALLERID(num)=mycompanyinc)
exten => _91NXXNXXXXXX,2,Dial(SIP/att/${EXTEN:1},80)
exten => _9NXXXXXX,1,Set(CALLERID(num)=mycompanyinc)
exten => _9NXXXXXX,2,Dial(SIP/att/${EXTEN:1},80)


any ideas? as this happens random, 

[andres at telesip.net]

On 1/28/14, 1:55 PM, motty cruz wrote:

[cwallace at lodgingcom...]

On Tue, 28 Jan 2014 10:55:58 -0800
motty cruz <motty.cruz@gmail.com> wrote:

[motty.cruz at gmail.com]

Thank you for your reply, I updated extensions.conf file to reflect your suggestion, I will monitor Asterisk for any more issues, 

Thanks, 





On Tue, Jan 28, 2014 at 11:23 AM, Andres <andres@telesip.net (andres@telesip.net)> wrote:

[motty.cruz at gmail.com]

look like the issue continues, I am unable to overwrite callerid from sip.conf in extensions.conf, 

In sip.conf under
[general]
trustrpid = no < should i change it to yes?


Thanks








On Tue, Jan 28, 2014 at 1:06 PM, motty cruz <motty.cruz@gmail.com (motty.cruz@gmail.com)> wrote:

[jhester at digium.com]

Howdy,

Before changing any configuration I would highly recommend reading through the entry in the sample file. Trust remote party ID may be set to 'no' for a very good reason on your PBX, please take care to understand why it should be changed before doing so.


Before digging into that though, what does the CLI tell you if you do a NoOp() after having Set() the Caller ID function [1]?


[1]  Something like;