VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
Adam.Vocks at cticompu...
Guest
|
 Posted: Fri Jan 31, 2014 12:42 pm Post subject: [asterisk-users] e911 Signalling |
 |
|
Hi,
We’ve got a dedicated T1 with two trunks running into our ILECs selective router for 911. Split out of the T1 into two MF CAMA trunks on ILEC side.
I’m trying to use asterisks e911 signaling, but I’m having trouble with the dial command. (== Everyone is busy/congested at this time (1:1/0/0))
I’m missing something and I’m thinking it has to do with the hookstate of the dahdi channel.
If anyone has a similar situation and want to provide some guidance, I’d sure appreciate it.
Thanks!
Adam
Here’s my config:
DAHDI version 2.8.0.1
[root@e911 dahdi]# dahdi_hardware
pci:0000:02:01.0 wct1xxp+ e159:0001 Digium Wildcard T100P T1/PRI or E100P E1/PRA Board
e911*CLI> core show version
Asterisk 11.7.0 built by root @ e911 on a x86_64 running Linux on 2014-01-28 15:50:19 UTC
/etc/dahdi/system.conf
span=1,1,0,esf,b8zs
e&m=1-2
/etc/asterisk/chan_dahdi.conf
[channels]
group=1
signalling=e911
channel=>1-2
/etc/asterisk/extensions.conf
[InFromSIP]
exten => s,1,dial(DAHDI/1/${CALLERID(num)})
e911*CLI> dahdi show status
Description Alarms IRQ bpviol CRC Fra Codi Options LBO
Digium Wildcard T100P T1/PRI Card 0 OK 0 0 0 ESF B8ZS 0 db (CSU)/0-133 feet (DSX-1)
e911*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State Description
pseudo default default In Service
1 public default In Service
2 public default In Service
e911*CLI> dahdi show channel 1
Channel: 1
Description:
File Descriptor: 7
Span: 1
Extension:
Dialing: no
Context: public
Caller ID:
Calling TON: 0
Caller ID name:
Mailbox: none
Destroy: 0
InAlarm: 0
Signalling Type: E911 (MF)
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Busy Detection: no
TDD: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
Gains (RX/TX): 0.00/0.00
Dynamic Range Compression (RX/TX): 0.00/0.00
DND: no
Echo Cancellation:
128 taps
currently OFF
Wait for dialtone: 0ms
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Offhook
Here’s a debug from a 911 call.
[Jan 31 11:29:53] DEBUG[9876][C-00000005]: pbx.c:4890 pbx_extension_helper: Launching 'Dial'
-- Executing [s@InFromSIP:1] Dial("SIP/SIP-00000005", "DAHDI/1/2177772001") in new stack
[Jan 31 11:29:53] DEBUG[9876][C-00000005]: sig_analog.c:820 analog_available: analog_available 1
[Jan 31 11:29:53] DEBUG[9876][C-00000005]: sig_analog.c:845 analog_available: Channel 1 off hook, can't use
[Jan 31 11:29:53] WARNING[9876][C-00000005]: app_dial.c:2437 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 17 - User busy)
== Everyone is busy/congested at this time (1:1/0/0)
[Jan 31 11:29:53] DEBUG[9876][C-00000005]: app_dial.c:3100 dial_exec_full: Exiting with DIALSTATUS=BUSY.
-- Auto fallthrough, channel 'SIP/SIP-00000005' status is 'BUSY' |
|
| Back to top |
|
 |
Adam.Vocks at cticompu...
Guest
|
| Posted: Fri Jan 31, 2014 4:25 pm Post subject: [asterisk-users] e911 Signalling |
|
|
Well, good news, it was the telco side. They had their ports disabled.
I ended up having to use signalling=fgccamamf.
Adam
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Adam Vocks
Sent: Friday, January 31, 2014 11:43 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] e911 Signalling
Hi,
We’ve got a dedicated T1 with two trunks running into our ILECs selective router for 911. Split out of the T1 into two MF CAMA trunks on ILEC side.
I’m trying to use asterisks e911 signaling, but I’m having trouble with the dial command. (== Everyone is busy/congested at this time (1:1/0/0))
I’m missing something and I’m thinking it has to do with the hookstate of the dahdi channel.
If anyone has a similar situation and want to provide some guidance, I’d sure appreciate it.
Thanks!
Adam
Here’s my config:
DAHDI version 2.8.0.1
[root@e911 dahdi]# dahdi_hardware
pci:0000:02:01.0 wct1xxp+ e159:0001 Digium Wildcard T100P T1/PRI or E100P E1/PRA Board
e911*CLI> core show version
Asterisk 11.7.0 built by root @ e911 on a x86_64 running Linux on 2014-01-28 15:50:19 UTC
/etc/dahdi/system.conf
span=1,1,0,esf,b8zs
e&m=1-2
/etc/asterisk/chan_dahdi.conf
[channels]
group=1
signalling=e911
channel=>1-2
/etc/asterisk/extensions.conf
[InFromSIP]
exten => s,1,dial(DAHDI/1/${CALLERID(num)})
e911*CLI> dahdi show status
Description Alarms IRQ bpviol CRC Fra Codi Options LBO
Digium Wildcard T100P T1/PRI Card 0 OK 0 0 0 ESF B8ZS 0 db (CSU)/0-133 feet (DSX-1)
e911*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State Description
pseudo default default In Service
1 public default In Service
2 public default In Service
e911*CLI> dahdi show channel 1
Channel: 1
Description:
File Descriptor: 7
Span: 1
Extension:
Dialing: no
Context: public
Caller ID:
Calling TON: 0
Caller ID name:
Mailbox: none
Destroy: 0
InAlarm: 0
Signalling Type: E911 (MF)
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Busy Detection: no
TDD: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
Gains (RX/TX): 0.00/0.00
Dynamic Range Compression (RX/TX): 0.00/0.00
DND: no
Echo Cancellation:
128 taps
currently OFF
Wait for dialtone: 0ms
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Offhook
Here’s a debug from a 911 call.
[Jan 31 11:29:53] DEBUG[9876][C-00000005]: pbx.c:4890 pbx_extension_helper: Launching 'Dial'
-- Executing [s@InFromSIP:1] Dial("SIP/SIP-00000005", "DAHDI/1/2177772001") in new stack
[Jan 31 11:29:53] DEBUG[9876][C-00000005]: sig_analog.c:820 analog_available: analog_available 1
[Jan 31 11:29:53] DEBUG[9876][C-00000005]: sig_analog.c:845 analog_available: Channel 1 off hook, can't use
[Jan 31 11:29:53] WARNING[9876][C-00000005]: app_dial.c:2437 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 17 - User busy)
== Everyone is busy/congested at this time (1:1/0/0)
[Jan 31 11:29:53] DEBUG[9876][C-00000005]: app_dial.c:3100 dial_exec_full: Exiting with DIALSTATUS=BUSY.
-- Auto fallthrough, channel 'SIP/SIP-00000005' status is 'BUSY' |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
