VoIP Mailing List Archives

[raghavgoud.g at gmail.com]

Hi all,

   I want to two sip clients connect through Asterisk in local network for testing. My sip.conf file looks like this 


 [general]
context=internal
allowguest=no
allowoverlap=no
bindport=5060
bindaddr=0.0.0.0
srvlookup=no
disallow=all
allow=ulaw
alwaysauthreject=yes
canreinvite=no
nat=yes
session-timers=refuse
localnet=192.168.1.0/255.255.255.0


[7001]
type=friend
host=dynamic
secret=123abcd
context=internal


[7002]
type=friend
host=dynamic
secret=456abcd
context=internal




Am using linphone as sip client and create account on linphone with user name 7001 and 7002 
7001 is running on 192.168.2.15:5060
7002 is running on 192.168.2.45:5060 


when i try to call from 7002 to 7001 i specified sip:7001@192.168.2.15 ([email]sip%3A7001@192.168.2.15[/email]) it working fine as i know ip adress i specified it as url. if i dnt know the ipadress how can i call to 7001? i try to call sip:7001@192.168.2.20 ([email]sip%3A7001@192.168.2.20[/email]) it through call rejected because extension not found in context 'internal, error.
   
  How can call to sip id with out knowning ipadress where it is runnning? Any modification required for sip.conf file?


Thanks,
Raghav
  


 

[jhester at digium.com]

Howdy,

Your sip.conf file looks fine for some testing, though I would recommend _not_ using an extension number to name a sip endpoint. Instead, name the sip endpoint something more descriptive of the device. [Linphone-01] [Linphone-02] for example. Then you'll want to configure extensions.conf to Dial() the sip endpoint whenever the extension is dialed.




Justin Hester
Digium, Inc. · Technical Trainer
445 Jan Davis Drive NW · Huntsville, AL 35806 · USA
ph: +1 256 428 6238
Check us out at: http://digium.com · http://asterisk.org




On Mon, Feb 3, 2014 at 5:45 AM, Raghav Goud <raghavgoud.g@gmail.com (raghavgoud.g@gmail.com)> wrote: