VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
yudha2008 at gmail.com
Guest
|
 Posted: Fri Jan 02, 2009 4:19 am Post subject: [Freeswitch-users] busy tone detection |
 |
|
Hi Michael Jerris,
1. When we call a busy number wont it detect busy signal?
2. If we get the SIP response code for busy as 486 can we detect the tone?
3. And more over in the client side only we are using softphone, the other end is connected with E1 in the audiocode, so since it seems to be a e1 line here.
The connection is like this,
softphone---> freeswitch----> audiocode---> e1 line.
Thanks with Regards, N.Baskar
|
|
| Back to top |
|
 |
mike at jerris.com
Guest
|
| Posted: Fri Jan 02, 2009 12:54 pm Post subject: [Freeswitch-users] busy tone detection |
|
|
On Jan 2, 2009, at 4:17 AM, Baskar wrote:
| Quote: | Hi Michael Jerris,
1. When we call a busy number wont it detect busy signal? |
not if your getting a response code and trying to detect a tone.
| Quote: |
2. If we get the SIP response code for busy as 486 can we detect the tone? |
A 486 response code is not a tone, so there is no tone to detect.
| Quote: |
3. And more over in the client side only we are using softphone, the other end is connected with E1 in the audiocode, so since it seems to be a e1 line here. |
I would guess on an e1 pri you would never get a tone.
| Quote: |
The connection is like this,
softphone---> freeswitch----> audiocode---> e1 line. |
|
|
| Back to top |
|
|
yudha2008 at gmail.com
Guest
|
| Posted: Mon Jan 05, 2009 2:51 am Post subject: [Freeswitch-users] busy tone detection |
|
|
Hi Michael Jerris,
I have some questions can you answer me so that it will helpful to me
1)The tone detect will work only with openzap. Am i correct?" 2)To detect with IP related media gateway like audiocode can we get the response code from the freeswitch console?
3)In the above mail you have told that busy number and detecting a busy tone are COMPLETELY different things Can u explain briefly about How to detecting a busy tone.
Warm Regards,
N.Baskar |
|
| Back to top |
|
|
mike at jerris.com
Guest
|
| Posted: Mon Jan 05, 2009 9:44 am Post subject: [Freeswitch-users] busy tone detection |
|
|
On Jan 5, 2009, at 2:50 AM, Baskar wrote:
| Quote: | Hi Michael Jerris,
I have some questions can you answer me so that it will helpful to me
1)The tone detect will work only with openzap. Am i correct?" |
No, it works anywhere to detect tones
| Quote: | 2)To detect with IP related media gateway like audiocode can we get the response code from the freeswitch console?
|
You get the response code on any call regardless of endpoint type in the response from originate. The easiest way to get to this information is in the cdr or events.
| Quote: |
3)In the above mail you have told that busy number and detecting a busy tone are COMPLETELY different things Can u explain briefly about How to detecting a busy tone. |
You already had it right I think for detecting a tone, for detecting an out of band busy indication you would need to look at the cdr or events for the call.
Mike |
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
