VoIP Mailing List Archives

[kokoska.rokoska at pos...]

Anthony Minessale napsal(a):

[anthony.minessale at g...]

The paypal button on the hompege will do

On Tue, Mar 10, 2009 at 8:36 AM, kokoska rokoska <kokoska.rokoska@post.cz (kokoska.rokoska@post.cz)> wrote:

[kawarod at laposte.net]

Hi Anthony,

thanks for this but I'd like to know if it's possible also to change
only the caller_id_name and caller_id_number without modifying the from
header.

ex: with the origination variables I get this
From: "test" <sip:1234@172.29.0.5>;tag=X4v4Kvt1B2DQF
Remote-Party-ID: "test"
<sip:1234@172.29.0.5>;party=calling;screen=yes;privacy=off

and in the case of an anonymous call where from is like this on A-leg:
From: Anonymous
<sip:anonymous@anonymous.invalid>;tag=z07m5db13cb-cbs450547977-o-5273-368294925

it is changed like this on B-leg:
From: "test" <sip:1234@172.29.0.5>;tag=X4v4Kvt1B2DQF

Moreover, in case of a bridged call, could you add the possibility to
pass as is from header for an anonymous call.
Running current, I have this:
on A-leg:
From:
"Anonymous"<sip:anonymous@anonymous.invalid;user=phone>;tag=c0a80101-fed0c
on B-leg:
From: "Anonymous" <sip:anonymous@172.29.0.5>;tag=tpjD57U2pyrFN

and I'd like B-leg to match A-leg for anonymous call as stated in RFC,
anonymous@anonymous.invalid is the proposed way to handle anonymous
call, I'll add 50$ more for support of this last request.

thanks for your reactivity.
regards,
rod

Anthony Minessale wrote:

[kokoska.rokoska at pos...]

Done

kokoska.rokoska

Anthony Minessale napsal(a):

[anthony.minessale at g...]

ok if you are up to date you should be able to add

{sip_from_uri=sip:anonymous@anonymous.invalid} to your dial string.


On Tue, Mar 10, 2009 at 9:30 AM, rod <kawarod@laposte.net (kawarod@laposte.net)> wrote:

[kokoska.rokoska at pos...]

Anthony Minessale napsal(a):

[msc at freeswitch.org]

On Tue, Mar 10, 2009 at 6:16 AM, Anthony Minessale
<anthony.minessale@gmail.com> wrote:

[Prometheus001 at gmx.net]

Hello,

are these variables only available at call setup time or can they be
changed during a call, e.g. before a call is being transferred to
another destination?

Best regards
Peter

Michael Collins schrieb:

[krice at suspicious.org]

These should be available any time you are going to process a call thru the
dialplan and call a bridge on the call

[kawarod at laposte.net]

thanks a lot Anthony,

I consider the work is done and I did the paypal transfer of 200$.

But I'll be happy if you could do some minor changes:

I used this in the dialplan:
<action application="bridge"
data="{sip_cid_type=rpid,origination_caller_id_name=test,origination_caller_id_number=000000${sip_contact_user},origina\
tion_privacy=screen+hide_name+hide_number,sip_from_uri=sip:anonymous@anonymous.invalid}sofia/ss7/000000${destination_number}@${GW_IP}"/>

and I get this

From: "test" <sip:anonymous@anonymous.invalid>;tag=tQ52gmv6NyN0D.
Remote-Party-ID: "test"
<sip:000000123456789@anonymous.invalid>;party=calling;screen=yes;privacy=off.

as you may see, the origination_caller_id_name has been put in the from
URI, and the domain part in the remote party ID has been transformed to
@anonymous.invalid.

It would be perfect if I could get this instead:
From: "Anonymous" <sip:anonymous@anonymous.invalid>;tag=tQ52gmv6NyN0D.
Remote-Party-ID: "test"
<sip:000000123456789@172.29.0.5>;party=calling;screen=yes;privacy=off.

where 172.29.0.5 is the external IP used by FS to bridge the call in
this example (but I'm sure you already know this :p)

regards,
rod

Anthony Minessale wrote:

[anthony.minessale at g...]

On Wed, Mar 11, 2009 at 3:33 AM, rod <kawarod@laposte.net (kawarod@laposte.net)> wrote:

[kawarod at laposte.net]

ok,

almost perfect :p

using this in dialplan:
{sip_cid_type=rpid,origination_caller_id_number=000000${CALLER_NUMBER},origination_caller_id_name=test,originatio\
n_privacy=screen+hide_name+hide_number,sip_from_uri=sip:anonymous@anonymous.invalid}sofia/ss7/000000${destination_number}@${GW_IP}

I have this on B leg
From: "test" <sip:anonymous@anonymous.invalid>;tag=gQ53Hjp617BSH.
Remote-Party-ID: "test"
<sip:000000262262880001@172.29.0.5>;party=calling;screen=yes;privacy=off.

As you can see the caller id name is still modified, do you think you
could add something like sip_from_uri_name to circumvent this.

Anthony, I tried many settings for origination_privacy and it seems to
do nothing on the RPID header. Any clue?

regards.

Anthony Minessale wrote:

[anthony.minessale at g...]

try now

On Wed, Mar 11, 2009 at 9:09 AM, rod <kawarod@laposte.net (kawarod@laposte.net)> wrote:

[anthony.minessale at g...]

oops hit send too soon,

try now using sip_from_display variable to control the display field in the from url


On Wed, Mar 11, 2009 at 10:14 AM, Anthony Minessale <anthony.minessale@gmail.com (anthony.minessale@gmail.com)> wrote:

[leon at scarlet-intern...]

Hi,

I didn't try this new functionality yet, but shouldn't http://wiki.freeswitch.org/wiki/Channel_Variables#sip_cid_type
be in a different section ?

It's not SDP manipulation, or is it ?

regards,

Leon


On Mar 10, 2009, at 9:48 PM, Michael Collins wrote: