VoIP Mailing List Archives

[living1108 at gmail.com]

I've compiled/configured freeSwitch  on Debian Etch - IP 192.168.24.10 on a computer at home behind a NATing firewall.

My firewall/router has SIP (5080) and RTP (16834-) ports forwarded to the computer running  freeSwitch.

My setup is as follows:

a) 2 Cisco 7905G IP phones configured with the latest firmware at extensions 1000 & 1004

b) X-Lite softphone at extension 1001.

c) X-Lite softphone at extension 2010 at my office.


Calls between ALL devices on my LAN (extensions 100x ) work without problems.

I can receive calls from extension 2010 to the X_Lite extension (1001) on my LAN.

My problem is that audio from external extension 2010 to either Cisco IP phones on my LAN
is one-way. Cisco 7905G to X-Lite works but X-Lite to Cisco 7905G does not!

The X-Lite phone at extension 2010 is also behind a NATing firewall!

Has  anyone experienced this issue before?

[brian at freeswitch.org]

What port do these cisco's register with?

/b

On May 15, 2009, at 4:47 PM, Errol Livingston wrote:

[kjv at ken-ton.com]

Brian;

We went over this...


http://wiki.freeswitch.org/wiki/Freeswitch_Cisco_7960G_Howto


He's got exactly the same problem I had...
It's addressed in the wiki.
Follow the destructions exactly...

Best Regards,
Karl J. Vesterling
kjv@ken-ton.com (kjv@ken-ton.com)
202-461-3231 x0






On May 15, 2009, at 6:19 PM, Brian West wrote: