Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[Freeswitch-users] need hear solving a noise problem


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> freeSWITCH Users
View previous topic :: View next topic  
Author Message
juanbackson at gmail.com
Guest





PostPosted: Sat May 23, 2009 2:21 am    Post subject: [Freeswitch-users] need hear solving a noise problem Reply with quote

Hi,
 
I am getting problem when one UA is xlite and another UA is another sip application. 
 
When I call from xlite to a sip application, I am getting noise:
 
I have tried these:
  <extension name="redial">
      <condition field="destination_number" expression="^3000">
        <action application="bridge" data="{absolute_codec_string='GSM,PCMU'}sofia/192.168.1.191/4540"/>
      </condition>
    </extension>

  <extension name="redial">
      <condition field="destination_number" expression="^3000">
        <action application="bridge" data="sofia/192.168.1.191/4540"/>
      </condition>
    </extension>

 
show channels give me the following:
 
c5f42dec-646a-4675-af40-c4d173c8a7c7,inbound,2009-05-23 10:36:30,1243089390,sofia/internal/1000@192.168.1.191 (1000@192.168.1.191),CS_EXECUTE,1000,1000,192.168.1.193,3000,bridge,sofia/192.168.1.191/4540,XML,public,GSM,8000,GSM,8000
790d9b2a-88b9-4521-8934-31b059e04e7b,outbound,2009-05-23 10:36:30,1243089390,sofia/internal/4540,CS_CONSUME_MEDIA,1000,1000,192.168.1.193,4540,,,XML,public,,,,
 
The sip application and xlite is working fine ( voice is clear ) if I use Asterisk with the following line in sip.conf:
 
[4540]
canreinvite=no
type=friend
context=sip-external
allow=gsm
host=dynamic

[1000]
canreinvite=no
type=friend     
context=sip-external
allow=gsm 
host=dynamic  
 
 
Does anyone know how to mimic the same behavior in Freeswitch?
 
Thanks,
JB
 
Back to top
juanbackson at gmail.com
Guest





PostPosted: Sat May 23, 2009 2:23 am    Post subject: [Freeswitch-users] need hear solving a noise problem Reply with quote

Hi,
 
Just to follow up with this problem.  If I set both xlite and sip application to use PCMU, I am still getting noise even channels show the same codec:
 
API CALL [show(channels)] output:
uuid,direction,created,created_epoch,name,state,cid_name,cid_num,ip_addr,dest,application,application_data,dialplan,context,read_codec,read_rate,write_codec,write_rate
0816684d-7a29-4814-93e4-104ffc2ed984,inbound,2009-05-23 11:25:30,1243092330,sofia/internal/1000@192.168.1.191 (1000@192.168.1.191),CS_EXECUTE,1000,1000,192.168.1.193,3000,bridge,{absolute_codec_string='GSM,PCMU'}sofia/192.168.1.191/454044009539026,XML,public,PCMU,8000,PCMU,8000
a6f1e90c-f6a9-4ac1-9f26-fe08c5c0dd74,outbound,2009-05-23 11:25:30,1243092330,sofia/internal/454044009539026,CS_EXCHANGE_MEDIA,1000,1000,192.168.1.193,454044009539026,,,XML,public,PCMU,8000,PCMU,8000

Thanks for any suggestion.
 
Thanks,
JB


On Sat, May 23, 2009 at 3:11 PM, Juan Backson <juanbackson@gmail.com (juanbackson@gmail.com)> wrote:
Quote:
Hi,
 
I am getting problem when one UA is xlite and another UA is another sip application. 
 
When I call from xlite to a sip application, I am getting noise:
 
I have tried these:
  <extension name="redial">
      <condition field="destination_number" expression="^3000">
        <action application="bridge" data="{absolute_codec_string='GSM,PCMU'}sofia/192.168.1.191/4540"/>
      </condition>
    </extension>

  <extension name="redial">
      <condition field="destination_number" expression="^3000">
        <action application="bridge" data="sofia/192.168.1.191/4540"/>
      </condition>
    </extension>

 
show channels give me the following:
 
c5f42dec-646a-4675-af40-c4d173c8a7c7,inbound,2009-05-23 10:36:30,1243089390,sofia/internal/1000@192.168.1.191 (1000@192.168.1.191),CS_EXECUTE,1000,1000,192.168.1.193,3000,bridge,sofia/192.168.1.191/4540,XML,public,GSM,8000,GSM,8000
790d9b2a-88b9-4521-8934-31b059e04e7b,outbound,2009-05-23 10:36:30,1243089390,sofia/internal/4540,CS_CONSUME_MEDIA,1000,1000,192.168.1.193,4540,,,XML,public,,,,
 
The sip application and xlite is working fine ( voice is clear ) if I use Asterisk with the following line in sip.conf:
 
[4540]
canreinvite=no
type=friend
context=sip-external
allow=gsm
host=dynamic

[1000]
canreinvite=no
type=friend     
context=sip-external
allow=gsm 
host=dynamic  
 
 
Does anyone know how to mimic the same behavior in Freeswitch?
 
Thanks,
JB
 
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> freeSWITCH Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services