VoIP Mailing List Archives

[dujinfang at gmail.com]

I would route the DID to the host and port 5080 if you are using the default config, and make an extension in dialplan/public.xml to catch the DID. Press F8 to see the debug information if not sure what DID string should be matched.


On Jun 2, 2009, at 10:14 PM, Rex_Alex wrote:

[d at unwire.it]

Have you setup an inbound gateway similar to this?http://wiki.freeswitch.org/wiki/Tested_Phone_Providers_Listing


You also need to setup your dialplans for the inbound.... this page among others has more info:
http://wiki.freeswitch.org/wiki/Quick_Start


Finally, your FIREWALL can be the most critical to get right. In fact, you might want to start with this or revisit even if you think it is setup right. I was grasping around in the dark until I started using TCPDUMP to monitor what was happening with my connections.  In the end, I realized that I needed to open certain ports on the SENDING side -- so, for example, calls coming FROM port 5060 to *any* port on my side I actually forward to port 5080 on my freeswitch server.  At least I think that's what I ended up doing, but there are several different rules I setup as well.

On Tue, Jun 2, 2009 at 7:14 AM, Rex_Alex <rex.alex345@yahoo.com (rex.alex345@yahoo.com)> wrote:

[d at unwire.it]

UPDATE: I just looked at my firewall rules and looks like I scrapped all the logic I was attempting and now I just port forward ANYTHING coming from the IP of my provider gateway to my freeswitch box.  Seems to be working fine.

On Tue, Jun 2, 2009 at 7:35 AM, Darin Weeks <d@unwire.it (d@unwire.it)> wrote:

[rex.alex345 at yahoo.com]

Hello,

My public.xml configration is:

<extension name="inboundsip">
<condition field="destination_number" expression="^123456$"> <!--where
123456 is my DID number from my service provider -->
<action application="transfer" data="$1 XML default"/>
</condition>
</extension>

My default.xml configration is:

<extension name="Inbound">
<condition field="destination_number" expression="^*****$">
<action application="ring_ready" />
<action application="set" data="call_timeout=20"/>
<action application="bridge" data="sofia/sip/1001%freeswitchip"/>
</condition>
</extension>


When I am trying to call 123456 from my mobile no. Not able to see any
logging in FS console. Please assist where I am going wrong? Or do I require
any extra modules to be installed?

Thanks,
Rex









dujinfang wrote:

[brian at freeswitch.org]

On Jun 2, 2009, at 11:11 AM, Rex_Alex wrote:

[rex.alex345 at yahoo.com]

Hi Brian,

Missed....

sip_profiles/external.xml under <settings> tag



Thanks,
Rex



Rex_Alex wrote:

[rex.alex345 at yahoo.com]

Hi Brian,

I am using audiocode box with IP 2.2.2.2 and FS with IP 1.1.1.1

Addions made are,

acl.conf.xml

<list name="Inbound_Test" default="allow">
<node type="allow" cidr="2.2.2.2/32"/>
</list>

freeswitch.xml

<X-PRE-PROCESS cmd="set" data="internal_auth_calls=true"/>

sip_profiles/external.xml

under <settings> tag

public.xml

<extension name="Inbound">
<condition field="destination_number" expression="^(123456)$">
<action application="transfer" data="$1 XML default"/>
</condition>
</extension>

default.xml

<extension name="Inbound">
<condition field="destination_number" expression="^123456$">
<action application="ring_ready" />
<action application="set" data="call_timeout=20"/>
<action application="bridge" data="sofia/internal/1007%1.1.1.1"/>
</condition>
</extension>

Still, Inbound is not hitting my FS console itself. Please assist where am I
going wrong?

Thanks,
Rex







Brian West wrote:

[peter.olsson at vision...]

Have you configured the sip profile to use the acl list you have created (Inbound_Test)?

/Peter


----- Ursprungligt meddelande -----
Från: Rex_Alex <rex.alex345@yahoo.com>
Skickat: den 8 juni 2009 17:40
Till: freeswitch-users@lists.freeswitch.org <freeswitch-users@lists.freeswitch.org>
Ämne: Re: [Freeswitch-users] Inbound using FS


Hi Brian,

I am using audiocode box with IP 2.2.2.2 and FS with IP 1.1.1.1

Addions made are,

acl.conf.xml

<list name="Inbound_Test" default="allow">
<node type="allow" cidr="2.2.2.2/32"/>
</list>

freeswitch.xml

<X-PRE-PROCESS cmd="set" data="internal_auth_calls=true"/>

sip_profiles/external.xml

under <settings> tag

public.xml

<extension name="Inbound">
<condition field="destination_number" expression="^(123456)$">
<action application="transfer" data="$1 XML default"/>
</condition>
</extension>

default.xml

<extension name="Inbound">
<condition field="destination_number" expression="^123456$">
<action application="ring_ready" />
<action application="set" data="call_timeout=20"/>
<action application="bridge" data="sofia/internal/1007%1.1.1.1"/>
</condition>
</extension>

Still, Inbound is not hitting my FS console itself. Please assist where am I
going wrong?

Thanks,
Rex







Brian West wrote:

[rex.alex345 at yahoo.com]

Hello Peter,

Yes, I have added



under <settings> tag in sip_profiles/external.xml

Thanks,
Rex



Peter Olsson wrote:

[peter.olsson at vision...]

I don't see what you've added. But I guess it's something like <param name="apply-inbound-acl" value="Inbound_Test"/>.

Are you sure you're dialing into the external profile? It's on port 5080 by default, and the internal is on 5060.

/Peter


On 09-06-08 17.53, "Rex_Alex" <rex.alex345@yahoo.com> wrote:



Hello Peter,

Yes, I have added



under <settings> tag in sip_profiles/external.xml

Thanks,
Rex



Peter Olsson wrote:

[rex.alex345 at yahoo.com]

Hello,

I am not sure about the profile which I am calling into.

My scenario is this, I am trying to reach extn 1007 registered in FS server
from my mobile through an inbound PRI connected to the audiocode with DID
123456.

Thanks,
Rex



Peter Olsson wrote:

[peter.olsson at vision...]

The PRI/SIP-box probably talks to the internal profile (I guess that they are on the same LAN). Try to add the inbound-acl to the internal profile as well. Also restart FS completely, just to be 100% sure that config is reloaded.

//Peter


On 09-06-08 18.34, "Rex_Alex" <rex.alex345@yahoo.com> wrote:



Hello,

I am not sure about the profile which I am calling into.

My scenario is this, I am trying to reach extn 1007 registered in FS server
from my mobile through an inbound PRI connected to the audiocode with DID
123456.

Thanks,
Rex



Peter Olsson wrote:

[rex.alex345 at yahoo.com]

Hello,

Yes you are right. they are the on the same LAN. Inboun-acl added
in internal profile as well and restarted the FS completely. But no luck..
Please help us to resolve the same..

Thanks,
Rex


Peter Olsson wrote:

[peter.olsson at vision...]

Are you able to see anything at all in the console/log?

I'm starting to doubt that the call even gets into the FS box...

Try enabling more logs (console loglevel debug), and try again.


On 09-06-08 19.04, "Rex_Alex" <rex.alex345@yahoo.com> wrote:





Hello,

Yes you are right. they are the on the same LAN. Inboun-acl added
in internal profile as well and restarted the FS completely. But no luck..
Please help us to resolve the same..

Thanks,
Rex


Peter Olsson wrote:

[saigop at gmail.com]

Hi Rex,

    You need to allow your acl in internal.xml like the one,


<param name="apply-inbound-acl" value="internal-network"/>


Change the internal-network according to your configuration you allowed in acl.conf.xml.


I have tested with audiocode with PRI line its working fine.

On Mon, Jun 8, 2009 at 10:52 PM, Peter Olsson <peter.olsson@visionutveckling.se (peter.olsson@visionutveckling.se)> wrote: