VoIP Mailing List Archives

[god.nirvana at gmail.com]

hi,thanks for your reply. my openzap.conf like this: [span zt FXO1]name => OpenZAP-FXO1number => 1fxo-channel => 1[span zt FXO2]name => OpenZAP-FXO2number => 2fxo-channel => 2 [span zt FXO2]name => OpenZAP-FXO2number => 3fxo-channel => 3 [span zt FXO2]name => OpenZAP-FXO2number => 3fxo-channel => 4 i have a 4 fxo ports TDM400. 2009-06-04 god.nirvana ·¢¼þÈË£º Michael Jerris ·¢ËÍʱ¼ä£º 2009-06-04 17:06:05 ÊÕ¼þÈË£º freeswitch-users ³­ËÍ£º Ö÷Ì⣺ Re: [Freeswitch-users] busy tone detect issue Are you having this issue on your analog or pri lines? what does your openzap.conf look like? Mike On Jun 4, 2009, at 4:28 AM, god.nirvana wrote: hi all i am new to freeswitch. there are some busy tone detect issues,i hope someone could help me. i installed freeswitch from trunk,openzap,zaptel.... but i found some busy tone isuues my tones.conf: [us] generate-dial => v=-7;%(1000,0,350,440) detect-dial => 350,440 generate-ring => v=-7;%(2000,4000,440,480) detect-ring => 440,480 generate-busy => v=-7;%(500,500,450,340) detect-busy =>450,340 generate-attn => v=0;%(100,100,1400,2060,2450,2600) detect-attn => 1400,2060,2450,2600 generate-callwaiting-sas => v=0;%(300,0,440) detect-callwaiting-sas => 440 generate-callwaiting-cas => v=0;%(80,0,2750,2130) detect-callwaiting-cas => 2750,2130 detect-fail1 => 913.8 detect-fail2 => 1370.6 detect-fail3 => 776.7 openzap.conf.xml : <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> </settings> <pri_spans> <span name="PRI_1"> <!-- Log Levels: none, alert, crit, err, warning, notice, info, debug --> <param name="q921loglevel" value="alert"/> <param name="q931loglevel" value="alert"/> <param name="mode" value="user"/> <param name="dialect" value="5ess"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> <span name="PRI_2"> <param name="q921loglevel" value="alert"/> <param name="q931loglevel" value="alert"/> <param name="mode" value="user"/> <param name="dialect" value="5ess"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </pri_spans> <!-- one entry here per openzap span --> <analog_spans> <span id="1"> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="enable-callerid" value="true"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> <span id="2"> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="enable-callerid" value="true"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> <span id="3"> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="enable-callerid" value="true"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> <span id="4"> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="enable-callerid" value="true"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> </analog_spans> </configuration> when i call the pstn phone from a ip phone,if the pstn call hangup first,the ip phone will hear the busy tone,but the system does not handle the busytone ,the channel does not erase. so i have to add <action application="tone_detect" data="busy 450,340 w +25000 hangup 'normal_clearing' 3"/> in the dialplan.and it works.the channel erased. but in the conference case,pstn phone call in,hangup. all participants hear the tone,"do ~,do~~".freeswitch doest handle it. so i change the conference dialplan. <extension name="incoming-fxo-channel-1"> <condition field="source" expression="mod_openzap"> <action application="tone_detect" data="busy 450,340 w +25000 hangup 'normal_clearing' 3"/> <action application="bridge" data="sofia/maqian/6789@njpbx.vicp.net ([email]sofia/maqian/6789@njpbx.vicp.net[/email])"/> </condition> </extension> restart freeswitch,try again,freeswitch not handle the hangup tone still,all participants hear the tone. how to solve it?could some one help me ??? thx! BR