peter.olsson at vision...
Guest
|
 Posted: Wed Jun 17, 2009 10:37 am Post subject: [Freeswitch-users] Compiling Issues: Opal with Latest SVN Bu |
 |
|
If you use latest stable opal package you will be able to compile without patching mod_opal. That is what the guys from Opal recommend. The latest trunk has lots of things going on, so I'm not sure the patches I have supplied are sufficient anymore..
To load the module you must also enable it as a module in modules.conf.xml.
/Peter
-----Ursprungligt meddelande-----
Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Jonathan DiVita
Skickat: den 17 juni 2009 17:20
Till: freeswitch-users@lists.freeswitch.org
Ämne: Re: [Freeswitch-users] Compiling Issues: Opal with Latest SVN Builds 6-19-09 (Jon DiVita)
I was able to compile mod_opal with the patches you suggested. Now, once
that is done is there anything more I need to do inorder for mod_opal to
show up when I run freeswitch?
I didn't see that it had started when I ran freeswitch after the mod_opal
compile.
Thanks!
Jon
----- Original Message -----
From: <freeswitch-users-request@lists.freeswitch.org>
To: <freeswitch-users@lists.freeswitch.org>
Sent: Wednesday, June 17, 2009 12:26 AM
Subject: Freeswitch-users Digest, Vol 36, Issue 159
| Quote: | Send Freeswitch-users mailing list submissions to
freeswitch-users@lists.freeswitch.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
or, via email, send a message with subject or body 'help' to
freeswitch-users-request@lists.freeswitch.org
You can reach the person managing the list at
freeswitch-users-owner@lists.freeswitch.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Freeswitch-users digest..."
Today's Topics:
1. Re: Compiling Issues: Opal with Latest SVN Builds 6-19-09
(Brian West)
2. Re: How can I join two freeswitch on two servers? (Edmar Cruz)
3. Re: session.getDigits() not working (Brian West)
4. Re: How can I join two freeswitch on two servers? (Brian West)
5. Re: How can I join two freeswitch on two servers? (Edmar Cruz)
6. Re: How can I join two freeswitch on two servers? (Edmar Cruz)
7. Re: How can I join two freeswitch on two servers? (Brian West)
8. Re: How can I join two freeswitch on two servers? (Edmar Cruz)
----------------------------------------------------------------------
Message: 1
Date: Tue, 16 Jun 2009 22:12:01 -0500
From: Brian West <brian@freeswitch.org>
Subject: Re: [Freeswitch-users] Compiling Issues: Opal with Latest SVN
Builds 6-19-09
To: freeswitch-users@lists.freeswitch.org
Message-ID: <A8AB9B1C-35A3-4D25-82E7-D9F6E73EFBEC@freeswitch.org>
Content-Type: text/plain; charset="iso-8859-1"
please see MODOPAL-10 on jira.
/b
On Jun 16, 2009, at 10:05 PM, Jonathan DiVita wrote:
| Quote: | Hello, all. I'm currently playing around with a new install of
Freeswitch and wanted to try out mod_opal. Below are the current
SVN builds for opal, ptlib, and freeswitch. I end up with the
following errors when compiling.
making all mod_opal
Compiling mod_opal.cpp...
Compiling mod_opal.cpp ...
In file included from mod_opal.cpp:25:
mod_opal.h:151: error: conflicting return type specified for
?virtual OpalLocalConnection*
FSEndPoint::CreateConnection(OpalCall&, void*)?
/usr/include/opal/opal/localep.h:267: error: overriding ?virtual
ptlib_virtual_function_changed_or_removed******
OpalLocalEndPoint::CreateConnection(OpalCall&, void*)?
mod_opal.cpp: In constructor ?FSConnection::FSConnection(OpalCall&,
FSEndPoint&, switch_caller_profile_t*, switch_core_session_t*,
switch_channel_t*)?:
mod_opal.cpp:564: error: no matching function for call to
?OpalLocalConnection::OpalLocalConnection(OpalCall&, FSEndPoint&,
NULL)?
/usr/include/opal/opal/localep.h:290: note: candidates are:
OpalLocalConnection::OpalLocalConnection(OpalCall&,
OpalLocalEndPoint&, void*, unsigned int,
OpalConnection::StringOptions*, char)
/usr/include/opal/opal/localep.h:276: note:
OpalLocalConnection::OpalLocalConnection(const OpalLocalConnection&)
make[4]: *** [mod_opal.lo] Error 1
make[3]: *** [all] Error 1
make[2]: *** [mod_opal-all] Error 1
make[1]: *** [mod_opal] Error 2
make: *** [mod_opal] Error 2
|
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090616/a7bb947f/attachment-0001.html
------------------------------
Message: 2
Date: Tue, 16 Jun 2009 20:03:13 -0700 (PDT)
From: Edmar Cruz <darklion11@yahoo.com>
Subject: Re: [Freeswitch-users] How can I join two freeswitch on two
servers?
To: freeswitch-users@lists.freeswitch.org
Message-ID: <929908.28142.qm@web57310.mail.re1.yahoo.com>
Content-Type: text/plain; charset="us-ascii"
How can i turn off authentication? This is my acl.conf.xml on
192.168.0.105
<list name="fsb" default="deny">
<node type="allow" cidr="192.168.0.104/32"/>
</list>
On 192.168.0.4
<list name="fsa" default="deny">
<node type="allow" cidr="192.168.0.105/32"/>
</list>
________________________________
From: Brian West <brian@freeswitch.org>
To: freeswitch-users@lists.freeswitch.org
Sent: Tuesday, June 16, 2009 10:49:58 PM
Subject: Re: [Freeswitch-users] How can I join two freeswitch on two
servers?
Turn off authentication or use ACL's
/b
On Jun 16, 2009, at 8:28 PM, Edmar Cruz wrote:
| Quote: | Is there another way to manage the gateway with the caller id of the
user
not the gateway user id and is there a gateway that doesn't need a
username
and password?
|
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090616/2839a86d/attachment-0001.html
------------------------------
Message: 3
Date: Tue, 16 Jun 2009 22:31:21 -0500
From: Brian West <brian@freeswitch.org>
Subject: Re: [Freeswitch-users] session.getDigits() not working
To: freeswitch-users@lists.freeswitch.org
Message-ID: <84E4DE1F-D3B5-48B6-B420-AFB301CE1F9C@freeswitch.org>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
Shouldn't have really changed any behavior at all... What svn rev are
you on?
/b
On Jun 16, 2009, at 5:50 PM, paul.degt wrote:
| Quote: | API CALL [global_getvar()] output:
external_ssl_enable=false
external_tls_port=5081
external_sip_port=5080
external_auth_calls=false
internal_ssl_dir=/var/opt/freeswitch/conf/ssl
internal_sip_port=5060
default_provider_contact=5000
default_provider_from_domain=example.com
default_provider_password=password
external_rtp_ip=74.92.196.241
xmpp_server_profile=xmpps
xmpp_client_profile=xmppc
global_codec_prefs=G722,PCMU,PCMA,GSM
hold_music=local_stream://moh
external_ssl_dir=/var/opt/freeswitch/conf/ssl
internal_auth_calls=true
local_ip_v4=192.168.0.40
unroll_loops=true
default_areacode=918
default_provider_register=false
local_mask_v4=255.255.255.0
default_password=1234
call_debug=false
local_ip_v6=::1
default_provider_username=joeuser
sound_prefix=/var/opt/freeswitch/sounds/en/us/callie
outbound_caller_id=0000000000
default_country=US
base_dir=/var/opt/freeswitch
bind_server_ip=auto
internal_tls_port=5061
switch_serial=c0a8002854db
default_provider=example.com
outbound_codec_prefs=PCMU,PCMA,GSM
domain_name=192.168.0.40
domain=192.168.0.40
external_sip_ip=74.92.196.241
outbound_caller_name=Versafon.com
rs-ring=%(1000, 4000, 425.0, 0.0)
sit=%(274,0,913. ;%(274,0,1370.6);%(380,0,1776.7)
internal_ssl_enable=false
console_loglevel=debug
uk-ring=%(400,200,400,450);%(400,2200,400,450)
us-ring=%(2000, 4000, 440.0, 480.0)
sip_tls_version=tlsv1
fr-ring=%(1500, 3500, 440.0, 0.0)
bong-ring=v=-7;%(100,0,941.0,1477.0);v=-7;>=2;+=.1;%(1400,0,350,440)
|
------------------------------
Message: 4
Date: Tue, 16 Jun 2009 22:36:38 -0500
From: Brian West <brian@freeswitch.org>
Subject: Re: [Freeswitch-users] How can I join two freeswitch on two
servers?
To: freeswitch-users@lists.freeswitch.org
Message-ID: <DAE4A924-AA2E-4EDA-816C-B27C332635B2@freeswitch.org>
Content-Type: text/plain; charset="us-ascii"
Now you have to tell the sofia profile to use that ACL
/b
On Jun 16, 2009, at 10:03 PM, Edmar Cruz wrote:
| Quote: | How can i turn off authentication? This is my acl.conf.xml on
192.168.0.105
<list name="fsb" default="deny">
<node type="allow" cidr="192.168.0.104/32"/>
</list>
On 192.168.0.4
<list name="fsa" default="deny">
<node type="allow" cidr="192.168.0.105/32"/>
</list>
|
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090616/47e21916/attachment-0001.html
------------------------------
Message: 5
Date: Tue, 16 Jun 2009 21:00:04 -0700 (PDT)
From: Edmar Cruz <darklion11@yahoo.com>
Subject: Re: [Freeswitch-users] How can I join two freeswitch on two
servers?
To: freeswitch-users@lists.freeswitch.org
Message-ID: <24066647.post@talk.nabble.com>
Content-Type: text/plain; charset=us-ascii
How can sofia profile can call ACL?
Can you give me an example?
Brian West-3 wrote:
| Quote: |
Now you have to tell the sofia profile to use that ACL
/b
On Jun 16, 2009, at 10:03 PM, Edmar Cruz wrote:
| Quote: | How can i turn off authentication? This is my acl.conf.xml on
192.168.0.105
<list name="fsb" default="deny">
<node type="allow" cidr="192.168.0.104/32"/>
</list>
On 192.168.0.4
<list name="fsa" default="deny">
<node type="allow" cidr="192.168.0.105/32"/>
</list>
|
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
--
View this message in context:
http://www.nabble.com/How-can-I-join-two-freeswitch-on-two-servers--tp24045824p24066647.html
Sent from the Freeswitch-users mailing list archive at Nabble.com.
------------------------------
Message: 6
Date: Tue, 16 Jun 2009 21:02:21 -0700 (PDT)
From: Edmar Cruz <darklion11@yahoo.com>
Subject: Re: [Freeswitch-users] How can I join two freeswitch on two
servers?
To: freeswitch-users@lists.freeswitch.org
Message-ID: <24066647.post@talk.nabble.com>
Content-Type: text/plain; charset=us-ascii
How can sofia profile can call ACL?
Can you give me an example?
Like this?
I put this on external profile
"/>
"/>
Brian West-3 wrote:
| Quote: |
Now you have to tell the sofia profile to use that ACL
/b
On Jun 16, 2009, at 10:03 PM, Edmar Cruz wrote:
| Quote: | How can i turn off authentication? This is my acl.conf.xml on
192.168.0.105
<list name="fsb" default="deny">
<node type="allow" cidr="192.168.0.104/32"/>
</list>
On 192.168.0.4
<list name="fsa" default="deny">
<node type="allow" cidr="192.168.0.105/32"/>
</list>
|
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
--
View this message in context:
http://www.nabble.com/How-can-I-join-two-freeswitch-on-two-servers--tp24045824p24066647.html
Sent from the Freeswitch-users mailing list archive at Nabble.com.
------------------------------
Message: 7
Date: Tue, 16 Jun 2009 23:08:46 -0500
From: Brian West <brian@freeswitch.org>
Subject: Re: [Freeswitch-users] How can I join two freeswitch on two
servers?
To: freeswitch-users@lists.freeswitch.org
Message-ID: <93456DA1-47C0-4524-903B-0FDE310EE93D@freeswitch.org>
Content-Type: text/plain; charset=US-ASCII; format=flowed
COPY paste fail 
<param name="apply-inbound-acl" value="domains"/>
something like that as per the example.
/b
On Jun 16, 2009, at 11:02 PM, Edmar Cruz wrote:
------------------------------
Message: 8
Date: Tue, 16 Jun 2009 21:26:38 -0700 (PDT)
From: Edmar Cruz <darklion11@yahoo.com>
Subject: Re: [Freeswitch-users] How can I join two freeswitch on two
servers?
To: freeswitch-users@lists.freeswitch.org
Message-ID: <24066825.post@talk.nabble.com>
Content-Type: text/plain; charset=us-ascii
If FS A has an account 8011105 does FS B also nid to register 8011105? Yes
it
working on a gateway but the username of the gateway was shown on my
softphone and also it nids a password for the gateway... is there an
option
to view the caller name and number of the FS A gateway to FS B?
Brian West-3 wrote:
--
View this message in context:
http://www.nabble.com/How-can-I-join-two-freeswitch-on-two-servers--tp24045824p24066825.html
Sent from the Freeswitch-users mailing list archive at Nabble.com.
------------------------------
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
End of Freeswitch-users Digest, Vol 36, Issue 159
*************************************************
|
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
!DSPAM:4a390b1b32934139097269!
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org |
|
Search
