VoIP Mailing List Archives

[gcd at i.ph]

hi,

i tested the latest SVN build (13884) using the sample configuration files ... no modifications whatsoever. but in sofia external profile, the IP address is my internal address instead of my external IP address.

did i miss something here? tks.

-nandy

[jason at jasonjgw.net]

Nandy Dagondon <gcd@i.ph> wrote:

[gcd at i.ph]

the default setting is "auto-nat".

i changed ext-sip-ip=$${external_sip_ip} and ext-rtp-ip=$${external_rtp_ip}. both of them are set in vars.xml as stun:stun.freeswitch.org. result: same problem

i tried your suggestion. still the same problem.


On Sun, Jun 21, 2009 at 1:45 PM, Jason White <jason@jasonjgw.net (jason@jasonjgw.net)> wrote:

[jmesquita at gmail.com]

What I would guess is the the STUN lookup failed. Do you have anything on this box that would prevent FS from doing DNS lookup?

jmesquita

On Sun, Jun 21, 2009 at 3:20 AM, Nandy Dagondon <gcd@i.ph (gcd@i.ph)> wrote:

[gcd at i.ph]

i just come across the Auto NAT feature in the Wiki. i'm testing if my router UPNP works w/ FS. STUN works before i updated to SVN.

2009/6/21 João Mesquita <jmesquita@gmail.com (jmesquita@gmail.com)>

[gcd at i.ph]

it's working now, i mean the Auto NAT feature - after i enabled UPNP feature on my router. it's based on external IP addresses of Ext-SIP-IP and Ext-RTP-IP when performing "sofia status profile [internal|external]" on the cli.

however, "sofia status" still shows internal IP address on the external profile. it should display the external IP address instead.


On Sun, Jun 21, 2009 at 2:20 PM, Nandy Dagondon <gcd@i.ph (gcd@i.ph)> wrote:

[mike at jerris.com]

It has both the interface bind address and the external address


Mike

On Jun 21, 2009, at 3:38 AM, Nandy Dagondon <gcd@i.ph (gcd@i.ph)> wrote:

[brian at freeswitch.org]

Really it shouldn't have changed unless you wiped your configs. The reason it can't work with auto-nat is you're not behind a natpmp or upnp router thus you're going to have to set them manually use stun. You can not use stun for rtp-ip or sip-ip, just for ext-sip-ip and ext-rtp-ip once they are set correctly it should work without a problem.

/b

On Jun 21, 2009, at 1:20 AM, Nandy Dagondon wrote: