VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
shaheryarkh at googlem...
Guest
|
 Posted: Wed Jul 01, 2009 4:06 pm Post subject: [Freeswitch-users] G723 timer problem |
 |
|
Hi,
I am using FS svn revision 14046 and trying to send call from SIP Dialer to a SIP gateway using G723 in passthrough mode. Everything works perfect and destination rings but then call drops with following error on FS CLI,
2009-07-02 02:39:28.790508 [WARNING] mod_sofia.c:807 We were told to use ptime 30 but what they meant to say was 60This issue has so far been identified to happen on the following broken platforms/devices: Linksys/Sipura aka CiscoShoreTelSonus/L3 We will try to fix it but some of the devices on this list are so broken who knows what will happen..2009-07-02 02:39:28.790508 [WARNING] switch_core_codec.c:499 Codec G723 Exists but not at the desired implementation. 8000hz 60ms
Is there any work around for this or i have downgrade my server back to Asterisk. :'-(
Thank you.
--
Muhammad Shahzad
-----------------------------------
CISCO Rich Media Communication Specialist (CRMCS)
CISCO Certified Network Associate (CCNA)
Cell: +92 334 422 40 88
MSN: shari_786pk@hotmail.com (shari_786pk@hotmail.com)
Email: shaheryarkh@googlemail.com (shaheryarkh@googlemail.com) |
|
| Back to top |
|
 |
brian at freeswitch.org
Guest
|
| Posted: Wed Jul 01, 2009 4:14 pm Post subject: [Freeswitch-users] G723 timer problem |
|
|
You have two choices... set codec neg. to scrooge or get a provider that doesn't lie about the ptime in their SDP.
/b
On Jul 1, 2009, at 4:04 PM, Muhammad Shahzad wrote:
| Quote: | Hi,
I am using FS svn revision 14046 and trying to send call from SIP Dialer to a SIP gateway using G723 in passthrough mode. Everything works perfect and destination rings but then call drops with following error on FS CLI,
2009-07-02 02:39:28.790508 [WARNING] mod_sofia.c:807 We were told to use ptime 30 but what they meant to say was 60This issue has so far been identified to happen on the following broken platforms/devices:Linksys/Sipura aka CiscoShoreTelSonus/L3We will try to fix it but some of the devices on this list are so broken who knows what will happen..2009-07-02 02:39:28.790508 [WARNING] switch_core_codec.c:499 Codec G723 Exists but not at the desired implementation. 8000hz 60ms
Is there any work around for this or i have downgrade my server back to Asterisk. :'-(
Thank you. |
|
|
| Back to top |
|
|
brian at freeswitch.org
Guest
|
| Posted: Wed Jul 01, 2009 4:31 pm Post subject: [Freeswitch-users] G723 timer problem |
|
|
I'm sorry about my response... I had overlooked that I only did one 30ms implementation in mod_g723_1.c, Anthony added some more to the list so it might actually work correctly.
Thanks,
Brian
On Jul 1, 2009, at 4:04 PM, Muhammad Shahzad wrote:
| Quote: | Hi,
I am using FS svn revision 14046 and trying to send call from SIP Dialer to a SIP gateway using G723 in passthrough mode. Everything works perfect and destination rings but then call drops with following error on FS CLI,
2009-07-02 02:39:28.790508 [WARNING] mod_sofia.c:807 We were told to use ptime 30 but what they meant to say was 60This issue has so far been identified to happen on the following broken platforms/devices:Linksys/Sipura aka CiscoShoreTelSonus/L3We will try to fix it but some of the devices on this list are so broken who knows what will happen..2009-07-02 02:39:28.790508 [WARNING] switch_core_codec.c:499 Codec G723 Exists but not at the desired implementation. 8000hz 60ms
Is there any work around for this or i have downgrade my server back to Asterisk. :'-(
Thank you.
|
|
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
