VoIP Mailing List Archives

[Kareem.Hamdy at trustv...]

Hello:

I would like to connect a Sangoma T1 card to FreeSWITCH. Most of the docs I see pertain to a PRI. When I leave out the d-chan notation, I get errors regarding not able to get the d-chan up and running in the CLI.

Here's my info:

[span wanpipe T1]
trunk_type => t1
b-channel => 1:1-24

[span wanpipe T2]
trunk_type => t1
b-channel => 2:1-24

----

#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec 6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
# by /usr/local/sbin/setup-sangoma program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE_API, Comment

[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 1
PCIBUS = 6
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0

TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
TDMV_HW_DTMF = YES
TDMV_HW_FAX_DETECT = NO

[w1g1]
ACTIVE_CH = ALL
TDMV_HWEC = YES
MTU = 80


---



In freeSWITCH's openzap.conf.xml, I've tried pri_span as well as analog.

I cannot find a straight up T1 wiki anywhere. Would someone please provide an example?


Thanks,
Kareem

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

[msc at freeswitch.org]

See inline comments

On Tue, Jul 14, 2009 at 5:04 PM, Kareem Hamdy <Kareem.Hamdy@trustvesta.com (Kareem.Hamdy@trustvesta.com)> wrote: