Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[Freeswitch-users] Cisco 7945/7965 CPE Compatibility with Freeswitch


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> freeSWITCH Users
View previous topic :: View next topic  
Author Message
brian at freeswitch.org
Guest





PostPosted: Thu Jul 30, 2009 5:35 am    Post subject: [Freeswitch-users] Cisco 7945/7965 CPE Compatibility with Fr Reply with quote

I don't think it will work the format is slightly different from the
standard last I checked and I couldn't get it working.

/b

On Jul 30, 2009, at 12:28 AM, Pat Jensen wrote:

Quote:
Hello,

I have had great success bringing up Freeswitch in my lab with
various makes/models of SIP hardware CPE, and I am starting to delve
into some more complex scenarios. I have two questions specific to
Cisco's current generation IP handsets (7965/7945):

1. Is integration of busy lamp fields working on the Cisco
7945/7965? It seems the Asterisk folks are in the process of
putting a patch together for 1.6 that uses SIP TCP as a path way,
and that Cisco may have some "extensions" required to make them
work. If they are supported on Freeswitch, could someone post an
XML phone / corresponding Freeswitch directory.xml configuration
that is known working? I've attempted what I think is correct based
on the SIP deployment guides and the Wiki's, but my BLF speed dial
buttons and call logs do not show any presence information.

<callLogBlfEnabled>1</callLogBlfEnabled> - tried 1 and 2 here

<line button="5">
<featureID>21</featureID>
<featureLabel>Phil 5000</featureLabel>
<speedDialNumber>5000</speedDialNumber>
</line>

2. Is it possible to send a dialed name from Freeswitch back to the
IP phone as feedback when a number is dialed out, similar to native
CallManager Express/UCM functionality? I've noticed that my Linksys
SPA962 will support this without any configuration changes
required. This behavior seems to be vendor implementation specific
- I'm not sure where this information is hiding so I can't refer to
it by it's SIP header to ask as an educated question.

I appreciate any help or guidance you can give me, even if it's
RTFM Smile Thanks folks.

Regards,

Pat
______


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
patj at linklocal.net
Guest





PostPosted: Thu Jul 30, 2009 6:54 am    Post subject: [Freeswitch-users] Cisco 7945/7965 CPE Compatibility with Fr Reply with quote

Hello,

I have had great success bringing up Freeswitch in my lab with various makes/models of SIP hardware CPE, and I am starting to delve into some more complex scenarios. I have two questions specific to Cisco's current generation IP handsets (7965/7945):

1. Is integration of busy lamp fields working on the Cisco 7945/7965? It seems the Asterisk folks are in the process of putting a patch together for 1.6 that uses SIP TCP as a path way, and that Cisco may have some "extensions" required to make them work. If they are supported on Freeswitch, could someone post an XML phone / corresponding Freeswitch directory.xml configuration that is known working? I've attempted what I think is correct based on the SIP deployment guides and the Wiki's, but my BLF speed dial buttons and call logs do not show any presence information.

<callLogBlfEnabled>1</callLogBlfEnabled> - tried 1 and 2 here

<line button="5">
<featureID>21</featureID>
<featureLabel>Phil 5000</featureLabel>
<speedDialNumber>5000</speedDialNumber>
</line>

2. Is it possible to send a dialed name from Freeswitch back to the IP phone as feedback when a number is dialed out, similar to native CallManager Express/UCM functionality? I've noticed that my Linksys SPA962 will support this without any configuration changes required. This behavior seems to be vendor implementation specific - I'm not sure where this information is hiding so I can't refer to it by it's SIP header to ask as an educated question.

I appreciate any help or guidance you can give me, even if it's RTFM Smile Thanks folks.

Regards,

Pat
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> freeSWITCH Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services