VoIP Mailing List Archives

[jerry.richards at teot...]

Mitul,

Thank you for your reply. Freeswitch is new to me, so I am not yet able to
take measurements of FS under a load of traffic. I was just asking for
future planning purposes. After I do some more development with it perhaps
I can record some of these measurements.

Thanks and Regards,
Jerry


-----Original Message-----
From: Mitul Limbani [mailto:mitul@enterux.com]
Sent: Friday, September 04, 2009 2:21 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Minimum/Recommended Freeswitch
SystemConfiguration

Jerry,

As far as I understand freeswitch, it using kernel to thread and this
operation eats good amount of RAM, but since the internal strructure of fs
is to store all these sip details in runtime sqlite db, which is compressed
text data earlier written in XML but while fs loads this configs it gets it
in sqlite and that's what it used instead of asterisks astdb.

Although what you see as recommended config for 500 users is true but it
also depends on which processor you are trying this on. Intel or AMD is
still ok but if you trying it on arm I don't have any data as such,
interestingly if you have some test hardware scenario you can actually test
and let us all know about it, it's quite useful bit of info that can be
positioned on the FS Wiki, in case you want to take this experiment offlist
do write to me, im interested to document

Look forward to hear from you,

Thanks & Regards,
Mitul Limbani,
Founder & CEO,
Enterux Solutions Pvt. Ltd.,
The Enterprise Linux Company (r),
http://www.enterux.com
http://www.entVoice.com

On 05-Sep-2009, at 12:03 AM, "Jerry Richards" <jerry.richards@teotech.com >
wrote: