VoIP Mailing List Archives

[email.list.subscriber ...]

Hello All,

Wondering if anyone has experienced this issue before. I've attached a snip of the log file where the error occurs and could use some leads on this. What's interesting is that the call appears to complete as normal, and a radius stop message even gets generated, though the duration is ~1 second.

<snip>
h323-disconnect-time = "h323-disconnect-time=14:35:01.000 UTC Tue Sep 15 2009"
h323-connect-time = "h323-connect-time=14:34:59.000 UTC Tue Sep 15 2009"
</snip>

While there are a lot of pieces involved, the call scenario is pretty basic (no transfers, no holds, etc.), just a few redirects that Freeswitch appears to be able to handle without issue. Attached is a dumb'd down call ladder.

I tried different rates at which I generate the calls, but it didn’t seem to correlate to the amount of errors I am seeing.

Sending a total of 100 calls, with a call duration of 10 seconds:
@10 calls per second = 14 "502" errors.
@5 calls per second = 4 "502" errors.
@4 calls per second = NO ERRORS (1st run)
@4 calls per second = 39 "502" errors.

Please let me know if any additional information is needed.

Thanks in advance for all help.

Vladimir