VoIP Mailing List Archives :: View topic - [Freeswitch-users] mod_radius_cdr: Multiple RADIUS messages for single call?

Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community

[Freeswitch-users] mod_radius_cdr: Multiple RADIUS messages for single call?

VoIP Mailing List Archives Forum Index -> freeSWITCH Users

View previous topic :: View next topic

Author

Message

mkezys at gmail.com
Guest

Posted: Wed Sep 16, 2009 12:44 am Post subject: [Freeswitch-users] mod_radius_cdr: Multiple RADIUS messages

Can you tell why Freeswitch + mod_radius_cdr was not good for you?

Regards,
Mindaugas Kezys
http://www.kolmisoft.com
VoIP Billing and Routing Solutions

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of email lists
Sent: 2009 m. rugsëjo 16 d. 00:53
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] mod_radius_cdr: Multiple RADIUS messages for single call?

Thanks to those for the info and help on this issue. Ultimately ended up having to use alternative software for the radius piece (not related to any shortfalls by Freeswitch).

Vlad

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale
Sent: Friday, September 11, 2009 11:31 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] mod_radius_cdr: Multiple RADIUS messages for single call?

set the variable process_cdr=false on that a_leg first thing in your dialplan
On Fri, Sep 11, 2009 at 2:26 AM, Anatoliy Kounitskiy <anatoliy@kounitskiy.com (anatoliy@kounitskiy.com)> wrote:
It's normal to have to two records for a call - Start and Stop message.

From what i see - you have one start and stop for each leg of the call.

Regards,
AK

email lists wrote:

Quote:

Hello,

Using the mod_radius_cdr module w/ Freeswitch, I am seeing duplicate
RADIUS messages being generated for individual calls (sample messages
for one call below). Looking at the "Acct-Unique-Session-Id" and
"Acct-Session-Id" fields, it would appear that perhaps each call leg
results in a pair of start/stop RADIUS messages; is this the expected
behavior? If so, is there a way to disable RADIUS messaging for what
I presume is the "ingress" or A leg of the call?

Any leads would be appreciated.

Thanks in advance.

Vladimir

Thu Sep 10 10:37:25 2009

Acct-Status-Type = Start

Acct-Session-Id = "b0f387c0-35bd-e32c-971a-d79d026a8004"

User-Name = "8135793256"

Freeswitch-Src = "8135793256"

Freeswitch-CLID = "sipp"

Freeswitch-Dst = "14043297226"

Freeswitch-Dialplan = "XML"

Framed-IP-Address = 50.46.50.55

Freeswitch-Context = "public"

Freeswitch-Source = "mod_sofia"

Freeswitch-Callstartdate = "2009-09-10T10:22:00.259042-0700"

NAS-Port = 0

Acct-Delay-Time = 0

NAS-IP-Address = 1.1.1.1

Acct-Unique-Session-Id = "097c8472ff7bcec7"

Timestamp = 1252604245

Request-Authenticator = Verified

Thu Sep 10 10:37:25 2009

Acct-Status-Type = Start

Acct-Session-Id = "584f4573-46f7-655f-91d7-84cd59c9ec12"

User-Name = "8135793256"

Freeswitch-Src = "8135793256"

Freeswitch-CLID = "sipp"

Freeswitch-Dst = "14043297226@x.x.x.x"

Freeswitch-Dialplan = "XML"

Framed-IP-Address = 50.46.50.55

Freeswitch-Context = "public"

Freeswitch-Source = "mod_sofia"

Freeswitch-Callstartdate = "2009-09-10T10:22:00.279044-0700"

NAS-Port = 0

Acct-Delay-Time = 0

NAS-IP-Address = 1.1.1.1

Acct-Unique-Session-Id = "53f729e173e8c0a9"

Timestamp = 1252604245

Request-Authenticator = Verified

Thu Sep 10 10:37:57 2009

Acct-Status-Type = Stop

Acct-Session-Id = "b0f387c0-35bd-e32c-971a-d79d026a8004"

Freeswitch-Hangupcause = Normal-Unspecified

User-Name = "8135793256"

Freeswitch-Src = "8135793256"

Freeswitch-CLID = "sipp"

Freeswitch-Dst = "14043297226"

Freeswitch-Dialplan = "XML"

Framed-IP-Address = 50.46.50.55

Freeswitch-Context = "public"

Freeswitch-Source = "mod_sofia"

Freeswitch-Lastapp = "bridge"

Freeswitch-Billusec = 32029926

Freeswitch-Callstartdate = "2009-09-10T10:22:00.259042-0700"

Freeswitch-Callanswerdate = "2009-09-10T10:22:00.319197-0700"

Freeswitch-Callenddate = "2009-09-10T10:22:32.349123-0700"

Acct-Session-Time = 32

NAS-Port = 0

Acct-Delay-Time = 0

NAS-IP-Address = 1.1.1.1

Acct-Unique-Session-Id = "097c8472ff7bcec7"

Timestamp = 1252604277

Request-Authenticator = Verified

Thu Sep 10 10:38:02 2009

Acct-Status-Type = Stop

Acct-Session-Id = "584f4573-46f7-655f-91d7-84cd59c9ec12"

Freeswitch-Hangupcause = Normal-Clearing

User-Name = "8135793256"

Freeswitch-Src = "8135793256"

Freeswitch-CLID = "sipp"

Freeswitch-Dst = "14043297226@x.x.x.x"

Freeswitch-Dialplan = "XML"

Framed-IP-Address = 50.46.50.55

Freeswitch-Context = "public"

Freeswitch-Source = "mod_sofia"

Freeswitch-Billusec = 32049973

Freeswitch-Callstartdate = "2009-09-10T10:22:00.279044-0700"

Freeswitch-Callanswerdate = "2009-09-10T10:22:00.289136-0700"

Freeswitch-Callenddate = "2009-09-10T10:22:32.339109-0700"

Acct-Session-Time = 32

NAS-Port = 0

Acct-Delay-Time = 0

NAS-IP-Address = 1.1.1.1

Acct-Unique-Session-Id = "53f729e173e8c0a9"

Timestamp = 1252604282

Quote:

Request-Authenticator = Verified**

------------------------------------------------------------------------

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org (FreeSWITCH-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org (FreeSWITCH-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm
MSN:anthony_minessale@hotmail.com ([email]MSN%3Aanthony_minessale@hotmail.com[/email])
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com ([email]PAYPAL%3Aanthony.minessale@gmail.com[/email])
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888@conference.freeswitch.org ([email]sip%3A888@conference.freeswitch.org[/email])
iax:guest@conference.freeswitch.org/888
googletalk:conf+888@conference.freeswitch.org ([email]googletalk%3Aconf%2B888@conference.freeswitch.org[/email])
pstn:213-799-1400

mkezys at gmail.com
Guest

Posted: Wed Sep 16, 2009 2:45 pm Post subject: [Freeswitch-users] mod_radius_cdr: Multiple RADIUS messages

Thank you for your answer.

Regards,
Mindaugas Kezys
http://www.kolmisoft.com
VoIP Billing and Routing Solutions

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of email lists
Sent: 2009 m. rugsëjo 16 d. 21:39
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] mod_radius_cdr: Multiple RADIUS messages for single call?

Hello Mindaugas,

It was not really a matter of Freeswitch + mod_radius_cdr not being good for me, or for what we needed it to do, but rather more of a resource and time constraint based decision. If we had 'C' knowledgeable resources readily available, the Freeswitch and Radius customizations required could've been completed, providing a more streamlined setup using Freeswitch alone.

However, due to resource and (in this case more importantly) time constraints, I shifted to an alternative solution that I could more quickly implement to meet our immediate needs. I will eventually re-visit relying solely on Freeswitch to simplify our setup and probably ask a few more questions when that time comes. Smile

Vladimir

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Mindaugas Kezys
Sent: Wednesday, September 16, 2009 1:29 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] mod_radius_cdr: Multiple RADIUS messages for single call?

Can you tell why Freeswitch + mod_radius_cdr was not good for you?

Regards,
Mindaugas Kezys
http://www.kolmisoft.com
VoIP Billing and Routing Solutions

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of email lists
Sent: 2009 m. rugsëjo 16 d. 00:53
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] mod_radius_cdr: Multiple RADIUS messages for single call?

Thanks to those for the info and help on this issue. Ultimately ended up having to use alternative software for the radius piece (not related to any shortfalls by Freeswitch).

Vlad

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale
Sent: Friday, September 11, 2009 11:31 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] mod_radius_cdr: Multiple RADIUS messages for single call?

set the variable process_cdr=false on that a_leg first thing in your dialplan
On Fri, Sep 11, 2009 at 2:26 AM, Anatoliy Kounitskiy <anatoliy@kounitskiy.com (anatoliy@kounitskiy.com)> wrote:
It's normal to have to two records for a call - Start and Stop message.

From what i see - you have one start and stop for each leg of the call.

Regards,
AK

email lists wrote:

Quote:

Hello,

Using the mod_radius_cdr module w/ Freeswitch, I am seeing duplicate
RADIUS messages being generated for individual calls (sample messages
for one call below). Looking at the "Acct-Unique-Session-Id" and
"Acct-Session-Id" fields, it would appear that perhaps each call leg
results in a pair of start/stop RADIUS messages; is this the expected
behavior? If so, is there a way to disable RADIUS messaging for what
I presume is the "ingress" or A leg of the call?

Any leads would be appreciated.

Thanks in advance.

Vladimir

Thu Sep 10 10:37:25 2009

Acct-Status-Type = Start

Acct-Session-Id = "b0f387c0-35bd-e32c-971a-d79d026a8004"

User-Name = "8135793256"

Freeswitch-Src = "8135793256"

Freeswitch-CLID = "sipp"

Freeswitch-Dst = "14043297226"

Freeswitch-Dialplan = "XML"

Framed-IP-Address = 50.46.50.55

Freeswitch-Context = "public"

Freeswitch-Source = "mod_sofia"

Freeswitch-Callstartdate = "2009-09-10T10:22:00.259042-0700"

NAS-Port = 0

Acct-Delay-Time = 0

NAS-IP-Address = 1.1.1.1

Acct-Unique-Session-Id = "097c8472ff7bcec7"

Timestamp = 1252604245

Request-Authenticator = Verified

Thu Sep 10 10:37:25 2009

Acct-Status-Type = Start

Acct-Session-Id = "584f4573-46f7-655f-91d7-84cd59c9ec12"

User-Name = "8135793256"

Freeswitch-Src = "8135793256"

Freeswitch-CLID = "sipp"

Freeswitch-Dst = "14043297226@x.x.x.x (14043297226@x.x.x.x)"

Freeswitch-Dialplan = "XML"

Framed-IP-Address = 50.46.50.55

Freeswitch-Context = "public"

Freeswitch-Source = "mod_sofia"

Freeswitch-Callstartdate = "2009-09-10T10:22:00.279044-0700"

NAS-Port = 0

Acct-Delay-Time = 0

NAS-IP-Address = 1.1.1.1

Acct-Unique-Session-Id = "53f729e173e8c0a9"

Timestamp = 1252604245

Request-Authenticator = Verified

Thu Sep 10 10:37:57 2009

Acct-Status-Type = Stop

Acct-Session-Id = "b0f387c0-35bd-e32c-971a-d79d026a8004"

Freeswitch-Hangupcause = Normal-Unspecified

User-Name = "8135793256"

Freeswitch-Src = "8135793256"

Freeswitch-CLID = "sipp"

Freeswitch-Dst = "14043297226"

Freeswitch-Dialplan = "XML"

Framed-IP-Address = 50.46.50.55

Freeswitch-Context = "public"

Freeswitch-Source = "mod_sofia"

Freeswitch-Lastapp = "bridge"

Freeswitch-Billusec = 32029926

Freeswitch-Callstartdate = "2009-09-10T10:22:00.259042-0700"

Freeswitch-Callanswerdate = "2009-09-10T10:22:00.319197-0700"

Freeswitch-Callenddate = "2009-09-10T10:22:32.349123-0700"

Acct-Session-Time = 32

NAS-Port = 0

Acct-Delay-Time = 0

NAS-IP-Address = 1.1.1.1

Acct-Unique-Session-Id = "097c8472ff7bcec7"

Timestamp = 1252604277

Request-Authenticator = Verified

Thu Sep 10 10:38:02 2009

Acct-Status-Type = Stop

Acct-Session-Id = "584f4573-46f7-655f-91d7-84cd59c9ec12"

Freeswitch-Hangupcause = Normal-Clearing

User-Name = "8135793256"

Freeswitch-Src = "8135793256"

Freeswitch-CLID = "sipp"

Freeswitch-Dst = "14043297226@x.x.x.x (14043297226@x.x.x.x)"

Freeswitch-Dialplan = "XML"

Framed-IP-Address = 50.46.50.55

Freeswitch-Context = "public"

Freeswitch-Source = "mod_sofia"

Freeswitch-Billusec = 32049973

Freeswitch-Callstartdate = "2009-09-10T10:22:00.279044-0700"

Freeswitch-Callanswerdate = "2009-09-10T10:22:00.289136-0700"

Freeswitch-Callenddate = "2009-09-10T10:22:32.339109-0700"

Acct-Session-Time = 32

NAS-Port = 0

Acct-Delay-Time = 0

NAS-IP-Address = 1.1.1.1

Acct-Unique-Session-Id = "53f729e173e8c0a9"

Timestamp = 1252604282

Quote:

Display posts from previous:

	VoIP Mailing List Archives Forum Index -> freeSWITCH Users	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum