VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
woodydickson at gmail.com
Guest
|
 Posted: Wed Oct 07, 2009 5:47 am Post subject: [Freeswitch-users] unable to configure Digium TDM400P |
 |
|
Hi,
I am trying to setup a Digium TDM400P following the instruction on the wiki.
It is a 1 fxo and 1 fxs card, so I tried
loadzone=in
defaultzone=in
fxsks=2
fxoks=1
and
loadzone=in
defaultzone=in
fxsks=1
fxoks=2
None works. Does anyone know how it should be configured?
Here is what I get by following the wiki.
[root@localhost zaptel]# ztcfg -vv
Zaptel Version: SVN-branch-1.4-r4629M
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
2 channels to configure.
Changing signalling on channel 1 from FXO Kewlstart to FXS Kewlstart
Changing signalling on channel 2 from FXS Kewlstart to FXO Kewlstart
[root@localhost zaptel]# ztcfg -vv
Zaptel Version: SVN-branch-1.4-r4629M
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels to configure.
Changing signalling on channel 1 from FXS Kewlstart to FXO Kewlstart
Changing signalling on channel 2 from FXO Kewlstart to FXS Kewlstart
[root@localhost zaptel]# lspci
00:14.0 Ethernet controller: Digium, Inc. TDM400P (rev 11) |
|
| Back to top |
|
 |
msc at freeswitch.org
Guest
|
| Posted: Wed Oct 07, 2009 12:07 pm Post subject: [Freeswitch-users] unable to configure Digium TDM400P |
|
|
The ztcfg seems okay since it set the signaling to kewlstart. What part is not working? Be sure to pastebin your openzap.conf and openzap.conf.xml files as well as a full debug of what happens when loading mod_openzap.
-MC
On Wed, Oct 7, 2009 at 3:40 AM, Woody Dickson <woodydickson@gmail.com (woodydickson@gmail.com)> wrote:
| Quote: | Hi,
I am trying to setup a Digium TDM400P following the instruction on the wiki.
It is a 1 fxo and 1 fxs card, so I tried
loadzone=in
defaultzone=in
fxsks=2
fxoks=1
and
loadzone=in
defaultzone=in
fxsks=1
fxoks=2
None works. Does anyone know how it should be configured?
Here is what I get by following the wiki.
[root@localhost zaptel]# ztcfg -vv
Zaptel Version: SVN-branch-1.4-r4629M
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
2 channels to configure.
Changing signalling on channel 1 from FXO Kewlstart to FXS Kewlstart
Changing signalling on channel 2 from FXS Kewlstart to FXO Kewlstart
[root@localhost zaptel]# ztcfg -vv
Zaptel Version: SVN-branch-1.4-r4629M
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels to configure.
Changing signalling on channel 1 from FXS Kewlstart to FXO Kewlstart
Changing signalling on channel 2 from FXO Kewlstart to FXS Kewlstart
[root@localhost zaptel]# lspci
00:14.0 Ethernet controller: Digium, Inc. TDM400P (rev 11)
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org (FreeSWITCH-users@lists.freeswitch.org)
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
|
|
|
| Back to top |
|
|
woodydickson at gmail.com
Guest
|
| Posted: Thu Oct 08, 2009 12:54 am Post subject: [Freeswitch-users] unable to configure Digium TDM400P |
|
|
Hi Michael
Is the ztcfg output supposed to say something like 2 channels configured?
I have not set up openzap yet because I don't know if the openzap.config is good or not.
Can you give me any suggestion if the ztcfg output I am getting is proper or not?
thx,
woody
|
|
| Back to top |
|
|
msc at freeswitch.org
Guest
|
| Posted: Thu Oct 08, 2009 11:58 am Post subject: [Freeswitch-users] unable to configure Digium TDM400P |
|
|
On Wed, Oct 7, 2009 at 10:45 PM, Woody Dickson <woodydickson@gmail.com (woodydickson@gmail.com)> wrote:
| Quote: |
Hi Michael
Is the ztcfg output supposed to say something like 2 channels configured?
|
Yes. If you had the signaling incorrect it would complain.
| Quote: |
I have not set up openzap yet because I don't know if the openzap.config is good or not.
|
You need to make sure that zaptel is set up first. Running ztcfg and getting no errors or warnings, plus a message that says "2 channels configured" is a pretty good sign that you can move on to the OpenZAP stuff.
| Quote: | Can you give me any suggestion if the ztcfg output I am getting is proper or not?
|
No obvious problems, so move on to the OpenZAP configs.
-MC
|
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
