Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[Freeswitch-users] Bridge application with shared lines


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> freeSWITCH Users
View previous topic :: View next topic  
Author Message
yehavi.bourvine at gma...
Guest
PostPosted: Tue Oct 06, 2009 3:25 am    Post subject: [Freeswitch-users] Bridge application with shared lines Reply with quote
Hello,
 
  We have Polycom and SNOM phones running with FreeSwitch. The Polycoms have shared lines defined and the SNOMs have both shared lines and BLFs (defined as extensions in the phone config). I've tried supporting both, but have some incompatibility:
 
  • When calling the Bridge application with data parameter of sofia/profile-name/number@domain the BLF works ok, but not the shared lines (i.e only one of the phones  rings).
  • When calling the Bridge application with data parameter of ${sofia_contact(/profile-name/number@domain)} shared lines work ok but BLF doesn't fire up.
 
How do I support both? Is there a way to know whether the destination is a shared one and then chose one of the above formats?
 
                                  Thanks! __Yehavi:
Back to top
mike at jerris.com
Guest
PostPosted: Wed Oct 07, 2009 8:45 am    Post subject: [Freeswitch-users] Bridge application with shared lines Reply with quote
On Oct 6, 2009, at 4:14 AM, Yehavi Bourvine wrote:
Quote:
Hello,

We have Polycom and SNOM phones running with FreeSwitch. The Polycoms have shared lines defined and the SNOMs have both shared lines and BLFs (defined as extensions in the phone config). I've tried supporting both, but have some incompatibility:

  • When calling the Bridge application with data parameter of sofia/profile-name/number@domain the BLF works ok, but not the shared lines (i.e only one of the phones rings).
  • When calling the Bridge application with data parameter of ${sofia_contact(/profile-name/number@domain)} shared lines work ok but BLF doesn't fire up.

How do I support both? Is there a way to know whether the destination is a shared one and then chose one of the above formats?



You should probably always be using the second method or using a % instead of the @ in the first method to get the registered contact. can you provide more information about why the BLF "doesn't fire up" .


Mike
Back to top
brian at freeswitch.org
Guest
PostPosted: Wed Oct 07, 2009 9:39 am    Post subject: [Freeswitch-users] Bridge application with shared lines Reply with quote
You'll need to set presence_id so it can work properly. SEE the default config that does exactly that with sofia_contact in the dial-string on the domain.

/b

On Oct 7, 2009, at 8:26 AM, Michael Jerris wrote:
Quote:
Quote:
  • When calling the Bridge application with data parameter of sofia/profile-name/number@domain the BLF works ok, but not the shared lines (i.e only one of the phones rings).
  • When calling the Bridge application with data parameter of ${sofia_contact(/profile-name/number@domain)} shared lines work ok but BLF doesn't fire up.

Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> freeSWITCH Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services