VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
View previous topic :: View next topic |
Author |
Message |
johnkiniston at gmail.com Guest
|
Posted: Thu Dec 05, 2013 7:36 pm Post subject: [asterisk-users] Paging in waves. |
|
|
I've been working on writing a subroutine to page groups of phones at once and I'm having some difficulty.
My goal is to have a user call an extension, I record the page they wish to play, I then page out that recorded file to the phones in groups.
[sub-masspage]
exten => s,1,NoOP
same => n,Answer
same => n,Set(filename=$PAGE)
same => n,Wait(1)
same => n,Record(pagequeue/${filename}%d.gsm,0,30,yk)
same => n,Set(DURATION=$[CEIL(${STAT(s,/var/lib/asterisk/sounds/${RECORDED_FILE}.gsm)} / 1650)])
same => n,Playback(one-moment-please)
same => n,Set(MUTEAUDIO(all)=on)
same => n,SIPAddHeader(Alert-Info: RingAnswer)
same => n,SipAddHeader(Call-Info: <uri>\;answer-after=0)
;same => n,Set(TIMEOUT(absolute)=${DURATION})
same => n,ExecIf($[${ISNULL(${ARG1})}=0]?Page(${ARG1},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG2})}=0]?Page(${ARG2},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG3})}=0]?Page(${ARG3},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG4})}=0]?Page(${ARG4},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG5})}=0]?Page(${ARG5},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG6})}=0]?Page(${ARG6},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG7})}=0]?Page(${ARG7},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG8})}=0]?Page(${ARG8},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG9})}=0]?Page(${ARG9},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG10})}=0]?Page(${ARG10},n(${RECORDED_FILE})is)10)
same => n,Set(MUTEAUDIO(all)=off)
same => n,Playback(goodbye)
same => n,TrySystem(rm -f /var/lib/asterisk/sounds/${RECORDED_FILE}.gsm)
same => n,Hangup
;end sub-masspage
The issue I'm having is the Page command is putting the phone that's doing the paging into the meetme bridge it's creating and the dialplan stops at the first Page command.
While I was testing it with a single phone I was using Dial instead of Page
same => n,ExecIf($[${ISNULL(${ARG1})}=0]?Dial(${ARG1},15,A(${RECORDED_FILE})S(${DURATION})mg)
))
same => n,ExecIf($[${ISNULL(${ARG2})}=0]?Dial(${ARG2},15,A(${RECORDED_FILE})S(${DURATION})mg)))
Which worked great when I sent it one phone in each argument.. Didn't think about the fact that the first phone that answers is the only phone that answers till I got deeper into writing it... (It's been a long day)
So I'm at a loss as what to do here, Dial almost does what I need other than the fact that the first phone that answers is the only phone that bridges, and Page almost does what I need other than my dialplan execution stops after the first Page command and it's trying to include the phone I'm calling from as one of the phones it's paging.
I'm using 1.8 so I've got Meetme and Confbridge available but I'm not sure what to do unless I start playing with LOCAL channels. Maybe I could have PAGE call Local Channels that have the TIMEOUT set but then I'd need a way to pass which phones to dial in somehow.
Suggestions?
--
A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship, design a building, write a sonnet, balance accounts, build a wall, set a bone, comfort the dying, take orders, give orders, cooperate, act alone, solve equations, analyze a new problem, pitch manure, program a computer, cook a tasty meal, fight efficiently, die gallantly. Specialization is for insects.
---Heinlein |
|
Back to top |
|
|
johnkiniston at gmail.com Guest
|
Posted: Thu Dec 12, 2013 12:04 pm Post subject: [asterisk-users] Paging in waves. |
|
|
I wanted to follow up that I had solved my issue to my satisfaction and share the dialplan that did so.
[sub-masspage]
exten => s,1,NoOP
same => n,Answer
same => n,Set(filename=PAGE)
same => n,Wait(1)
same => n,Record(pagequeue/${filename}%d.gsm,0,60,yk)
same => n,Set(DURATION=$[CEIL(${STAT(s,/var/lib/asterisk/sounds/${RECORDED_FILE}.gsm)} / 1650)])
same => n,Playback(one-moment-please)
same => n,SIPAddHeader(Alert-Info: RingAnswer)
same => n,SipAddHeader(Call-Info: <uri>\;answer-after=0); Yealink
same => n,ExecIf($[${ISNULL(${ARG1})}=0]?Dial(LOCAL/GO$[${DURATION} +2]@sub-masspage,5,U(sub-pageit^${ARG1}^${RECORDED_FILE})gm)))
same => n,ExecIf($[${ISNULL(${ARG2})}=0]?Dial(LOCAL/GO$[${DURATION} +2]@sub-masspage,5,U(sub-pageit^${ARG2}^${RECORDED_FILE})gm)))
same => n,ExecIf($[${ISNULL(${ARG3})}=0]?Dial(LOCAL/GO$[${DURATION} +2]@sub-masspage,5,U(sub-pageit^${ARG3}^${RECORDED_FILE})gm)))
same => n,ExecIf($[${ISNULL(${ARG4})}=0]?Dial(LOCAL/GO$[${DURATION} +2]@sub-masspage,5,U(sub-pageit^${ARG4}^${RECORDED_FILE})gm)))
same => n,ExecIf($[${ISNULL(${ARG5})}=0]?Dial(LOCAL/GO$[${DURATION} +2]@sub-masspage,5,U(sub-pageit^${ARG5}^${RECORDED_FILE})gm)))
same => n,ExecIf($[${ISNULL(${ARG6})}=0]?Dial(LOCAL/GO$[${DURATION} +2]@sub-masspage,5,U(sub-pageit^${ARG6}^${RECORDED_FILE})gm)))
same => n,ExecIf($[${ISNULL(${ARG7})}=0]?Dial(LOCAL/GO$[${DURATION} +2]@sub-masspage,5,U(sub-pageit^${ARG7}^${RECORDED_FILE})gm)))
same => n,ExecIf($[${ISNULL(${ARG8})}=0]?Dial(LOCAL/GO$[${DURATION} +2]@sub-masspage,5,U(sub-pageit^${ARG8}^${RECORDED_FILE})gm)))
same => n,ExecIf($[${ISNULL(${ARG9})}=0]?Dial(LOCAL/GO$[${DURATION} +2]@sub-masspage,5,U(sub-pageit^${ARG9}^${RECORDED_FILE})gm)))
same => n,ExecIf($[${ISNULL(${ARG10})}=0]?Dial(LOCAL/GO$[${DURATION} +2]@sub-masspage,5,U(sub-pageit^${ARG10}^${RECORDED_FILE})gm)))
same => n,Playback(auth-thankyou&goodbye)
same => n,TrySystem(rm -f /var/lib/asterisk/sounds/${RECORDED_FILE}.gsm)
same => n,Hangup
exten => _GO[0-9][0-9],1,NoOP
same => n,Answer
same => n,Wait(${EXTEN:-2})
same => n,Hangup
exten => _GO[0-9],1,NoOP
same => n,Answer
same => n,Wait(${EXTEN:-1})
same => n,Hangup
[sub-pageit]
exten => s,1,NoOP
same => n,Set(CALLERID(NAME)=PAGE)
same => n,Set(CALLERID(NUM)=PAGE)
same => n,Page(${ARG1},A(${ARG2})is),10)
same => n,Hangup
;end sub-masspage
On Thu, Dec 5, 2013 at 5:36 PM, John Kiniston <johnkiniston@gmail.com (johnkiniston@gmail.com)> wrote:
Quote: | I've been working on writing a subroutine to page groups of phones at once and I'm having some difficulty.
My goal is to have a user call an extension, I record the page they wish to play, I then page out that recorded file to the phones in groups.
[sub-masspage]
exten => s,1,NoOP
same => n,Answer
same => n,Set(filename=$PAGE)
same => n,Wait(1)
same => n,Record(pagequeue/${filename}%d.gsm,0,30,yk)
same => n,Set(DURATION=$[CEIL(${STAT(s,/var/lib/asterisk/sounds/${RECORDED_FILE}.gsm)} / 1650)])
same => n,Playback(one-moment-please)
same => n,Set(MUTEAUDIO(all)=on)
same => n,SIPAddHeader(Alert-Info: RingAnswer)
same => n,SipAddHeader(Call-Info: <uri>\;answer-after=0)
;same => n,Set(TIMEOUT(absolute)=${DURATION})
same => n,ExecIf($[${ISNULL(${ARG1})}=0]?Page(${ARG1},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG2})}=0]?Page(${ARG2},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG3})}=0]?Page(${ARG3},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG4})}=0]?Page(${ARG4},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG5})}=0]?Page(${ARG5},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG6})}=0]?Page(${ARG6},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG7})}=0]?Page(${ARG7},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG8})}=0]?Page(${ARG8},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG9})}=0]?Page(${ARG9},n(${RECORDED_FILE})is),10)
same => n,ExecIf($[${ISNULL(${ARG10})}=0]?Page(${ARG10},n(${RECORDED_FILE})is)10)
same => n,Set(MUTEAUDIO(all)=off)
same => n,Playback(goodbye)
same => n,TrySystem(rm -f /var/lib/asterisk/sounds/${RECORDED_FILE}.gsm)
same => n,Hangup
;end sub-masspage
The issue I'm having is the Page command is putting the phone that's doing the paging into the meetme bridge it's creating and the dialplan stops at the first Page command.
While I was testing it with a single phone I was using Dial instead of Page
same => n,ExecIf($[${ISNULL(${ARG1})}=0]?Dial(${ARG1},15,A(${RECORDED_FILE})S(${DURATION})mg)
))
same => n,ExecIf($[${ISNULL(${ARG2})}=0]?Dial(${ARG2},15,A(${RECORDED_FILE})S(${DURATION})mg)))
Which worked great when I sent it one phone in each argument.. Didn't think about the fact that the first phone that answers is the only phone that answers till I got deeper into writing it... (It's been a long day)
So I'm at a loss as what to do here, Dial almost does what I need other than the fact that the first phone that answers is the only phone that bridges, and Page almost does what I need other than my dialplan execution stops after the first Page command and it's trying to include the phone I'm calling from as one of the phones it's paging.
I'm using 1.8 so I've got Meetme and Confbridge available but I'm not sure what to do unless I start playing with LOCAL channels. Maybe I could have PAGE call Local Channels that have the TIMEOUT set but then I'd need a way to pass which phones to dial in somehow.
Suggestions?
--
A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship, design a building, write a sonnet, balance accounts, build a wall, set a bone, comfort the dying, take orders, give orders, cooperate, act alone, solve equations, analyze a new problem, pitch manure, program a computer, cook a tasty meal, fight efficiently, die gallantly. Specialization is for insects.
---Heinlein
|
--
A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship, design a building, write a sonnet, balance accounts, build a wall, set a bone, comfort the dying, take orders, give orders, cooperate, act alone, solve equations, analyze a new problem, pitch manure, program a computer, cook a tasty meal, fight efficiently, die gallantly. Specialization is for insects.
---Heinlein |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|