VoIP Mailing List Archives

[salah.elharit200 at gm...]

I have this scenario




In the first server 192.168.5.100 I have asterisk installed 1.4.43 and  one diguim card with 2 ports: in the first port connection for the provider X : the second port of diguim card  the connection of the provider Y  




In the second server (the same configuration) 192.168.5.200 asterisk installed 1.4.43 and  one diguim card with 2 ports : the first port is empty the second port  the connection of the provider Y  




My question how can I do in order to send the calls of the second providers from the port 2 server 1 and port 2 server 2 ()if one of them is down I continue to send the calls from the other






 Thanks and regards

[EWieling at nyigc.com]

Inbound call hunting is handled by your carrier, not Asterisk.

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Salaheddine Elharit
Sent: Thursday, December 19, 2013 12:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] send the calls from to servers


I have this scenario


In the first server 192.168.5.100 I have asterisk installed 1.4.43 and one diguim card with 2 ports: in the first port connection for the provider X : the second port of diguim card the connection of the provider Y


In the second server (the same configuration) 192.168.5.200 asterisk installed 1.4.43 and one diguim card with 2 ports : the first port is empty the second port the connection of the provider Y


My question how can I do in order to send the calls of the second providers from the port 2 server 1 and port 2 server 2 ()if one of them is down I continue to send the calls from the other



Thanks and regards

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[salah.elharit200 at gm...]

i ask about outbound calls not inbound round-robin 

best regards



2013/12/19 Eric Wieling <EWieling@nyigc.com (EWieling@nyigc.com)>

[stotaro at totarotechn...]

POTS?


On Thu, Dec 19, 2013 at 1:31 PM, Salaheddine Elharit <salah.elharit200@gmail.com (salah.elharit200@gmail.com)> wrote:

[EWieling at nyigc.com]

The basic idea is dial using your main outbound dahdi group, then check the value of HANGUPCAUSE, then if appropriate dial out using your secondary dahdi group. This is a standard thing. Check the mailing list archives and voip-info.org

See also the [stdexten] section of extensions.conf.sample

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Salaheddine Elharit
Sent: Thursday, December 19, 2013 1:32 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] send the calls from to servers

i ask about outbound calls not inbound round-robin

best regards


2013/12/19 Eric Wieling <EWieling@nyigc.com>


Inbound call hunting is handled by your carrier, not Asterisk.


-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Salaheddine Elharit
Sent: Thursday, December 19, 2013 12:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] send the calls from to servers


I have this scenario


In the first server 192.168.5.100 I have asterisk installed 1.4.43 and one diguim card with 2 ports: in the first port connection for the provider X : the second port of diguim card the connection of the provider Y


In the second server (the same configuration) 192.168.5.200 asterisk installed 1.4.43 and one diguim card with 2 ports : the first port is empty the second port the connection of the provider Y


My question how can I do in order to send the calls of the second providers from the port 2 server 1 and port 2 server 2 ()if one of them is down I continue to send the calls from the other



Thanks and regards


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users




--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[salah.elharit200 at gm...]

hello thanks for your response 


i try to switch the provider in the same server without issue
but my problem now i have 2 servers in the same network and with the same configuration


iw want to use the group 2 of the server 1 and group 2 of server 2 for the same calls. and if group 2 of server 1 is down i can continue to use group 2 of server 2 


thanks and regards




[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1,1


[channels]
#include dahdi-channels.conf


context=default
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
rxgain=0.0
txgain=0.0
immediate=yes
echocancel=no
dtmfmode=auto


group=1
switchtype=euroisdn
signalling=pri_cpe
callgroup=1
;pickupgroup=1
immediate=no
channel => 1-15,17-31


group=2
callgroup=2
switchtype=qsig
signalling=pri_net
callerid=5xxxxxxxx
immediate=no
channel => 32-46,48-52




2013/12/19 Eric Wieling <EWieling@nyigc.com (EWieling@nyigc.com)>

[EWieling at nyigc.com]

You must write dialplan code to do what you want. Assuming you are not using a GUI with Asterisk, post your dialplan used for outgoing calls.

-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Salaheddine Elharit
Sent: Friday, December 20, 2013 4:34 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] send the calls from to servers

hello
thanks for your response

i try to switch the provider in the same server without issue but my problem now i have 2 servers in the same network and with the same configuration

iw want to use the group 2 of the server 1 and group 2 of server 2 for the same calls. and if group 2 of server 1 is down i can continue to use group 2 of server 2

thanks and regards


[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1,1

[channels]
#include dahdi-channels.conf

context=default
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
rxgain=0.0
txgain=0.0
immediate=yes
echocancel=no
dtmfmode=auto

group=1
switchtype=euroisdn
signalling=pri_cpe
callgroup=1
;pickupgroup=1
immediate=no
channel => 1-15,17-31

group=2
callgroup=2
switchtype=qsig
signalling=pri_net
callerid=5xxxxxxxx
immediate=no
channel => 32-46,48-52


2013/12/19 Eric Wieling <EWieling@nyigc.com>



The basic idea is dial using your main outbound dahdi group, then check the value of HANGUPCAUSE, then if appropriate dial out using your secondary dahdi group. This is a standard thing. Check the mailing list archives and voip-info.org

See also the [stdexten] section of extensions.conf.sample


-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Salaheddine Elharit

Sent: Thursday, December 19, 2013 1:32 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion

Subject: Re: [asterisk-users] send the calls from to servers

i ask about outbound calls not inbound round-robin

best regards


2013/12/19 Eric Wieling <EWieling@nyigc.com>


Inbound call hunting is handled by your carrier, not Asterisk.


-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Salaheddine Elharit
Sent: Thursday, December 19, 2013 12:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] send the calls from to servers


I have this scenario


In the first server 192.168.5.100 I have asterisk installed 1.4.43 and one diguim card with 2 ports: in the first port connection for the provider X : the second port of diguim card the connection of the provider Y


In the second server (the same configuration) 192.168.5.200 asterisk installed 1.4.43 and one diguim card with 2 ports : the first port is empty the second port the connection of the provider Y


My question how can I do in order to send the calls of the second providers from the port 2 server 1 and port 2 server 2 ()if one of them is down I continue to send the calls from the other



Thanks and regards


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users




--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users




--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

[EWieling at nyigc.com]

You should be asking Aheeva these questions.

Here is an untested sample dialplan which could be adapted. If you need more info you should read the Asterisk Book.

Exten => _1NXXNXXXXXX,1,Dial(DAHDI/g1/${EXTEN})
Exten => same,n,GotoIf($["${DIALSTATUS" != "ANSWER" && ($["${DIALSTATUS" != "BUSY"]?failover)
Exten => same,n,Hangup
Exten => same,n(failover),Dial(SIP/otherserver/${EXTEN})
Exten => same,n,Hangup


"otherserver" would be the peer entry in sip.conf for your other server.


-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Salaheddine Elharit
Sent: Friday, December 20, 2013 10:51 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] send the calls from to servers

i attached file my dialplan


2013/12/20 Salaheddine Elharit <salah.elharit200@gmail.com>


in attached file my dialplan

thanks and regards





2013/12/20 Eric Wieling <EWieling@nyigc.com>


You must write dialplan code to do what you want. Assuming you are not using a GUI with Asterisk, post your dialplan used for outgoing calls.


-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Salaheddine Elharit

Sent: Friday, December 20, 2013 4:34 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] send the calls from to servers

hello
thanks for your response

i try to switch the provider in the same server without issue but my problem now i have 2 servers in the same network and with the same configuration

iw want to use the group 2 of the server 1 and group 2 of server 2 for the same calls. and if group 2 of server 1 is down i can continue to use group 2 of server 2

thanks and regards


[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1,1

[channels]
#include dahdi-channels.conf

context=default
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
rxgain=0.0
txgain=0.0
immediate=yes
echocancel=no
dtmfmode=auto

group=1
switchtype=euroisdn
signalling=pri_cpe
callgroup=1
;pickupgroup=1
immediate=no
channel => 1-15,17-31

group=2
callgroup=2
switchtype=qsig
signalling=pri_net
callerid=5xxxxxxxx
immediate=no
channel => 32-46,48-52


2013/12/19 Eric Wieling <EWieling@nyigc.com>



The basic idea is dial using your main outbound dahdi group, then check the value of HANGUPCAUSE, then if appropriate dial out using your secondary dahdi group. This is a standard thing. Check the mailing list archives and voip-info.org

See also the [stdexten] section of extensions.conf.sample


-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Salaheddine Elharit

Sent: Thursday, December 19, 2013 1:32 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion

Subject: Re: [asterisk-users] send the calls from to servers

i ask about outbound calls not inbound round-robin

best regards


2013/12/19 Eric Wieling <EWieling@nyigc.com>


Inbound call hunting is handled by your carrier, not Asterisk.


-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Salaheddine Elharit
Sent: Thursday, December 19, 2013 12:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] send the calls from to servers


I have this scenario


In the first server 192.168.5.100 I have asterisk installed 1.4.43 and one diguim card with 2 ports: in the first port connection for the provider X : the second port of diguim card the connection of the provider Y


In the second server (the same configuration) 192.168.5.200 asterisk installed 1.4.43 and one diguim card with 2 ports : the first port is empty the second port the connection of the provider Y


My question how can I do in order to send the calls of the second providers from the port 2 server 1 and port 2 server 2 ()if one of them is down I continue to send the calls from the other



Thanks and regards


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users




--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users




--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users





--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users