asteriskusers at dovid...
Guest
|
 Posted: Wed Jan 02, 2008 9:07 pm Post subject: [asterisk-users] setting up two asterisk server as ss7 back |
 |
|
You paid Sangoma for their product and that entitled you to support. Give
them a call and see if they can help you.
----- Original Message -----
From: "Goke Aruna" <goksie at gmail.com>
To: <asterisk-ss7 at lists.digium.com>; "Asterisk Users Mailing List -
Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Sent: Monday, December 03, 2007 12:52 AM
Subject: [asterisk-users] setting up two asterisk server as ss7 back to
back.
| Quote: |
I have used asterisk-1.4.14, zaptel-1.4.7, chan_ss7-1.0.0 on FC7 all
went okay. using sangoma a104dx on both machine.
I followed the write up on
http://www.voip-info.org/wiki/index.php?page=Asterisk+ss7+setup
I have the cross over cable between them.
however, wanpipe shows connected but the signaling link does not align.
i have my configs for host A
##wanpipe1.conf
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 15
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = MASTER
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 120OH
TE_SIG_MODE = CCS
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
# zaptel.conf
loadzone=uk
defaultzone=uk
span=1,1,0,ccs,hdb3
bchan=1-31
### ss7.conf
[linkset-ennie]
enabled => yes
use_connect => yes
enable_st => no
hunting_policy => odd_lru
subservice => auto
context = default
[link-l1]
linkset => ennie
channels => 1-15,17-31
schannel => 16
firstcic => 1
enabled => yes
[link-l2]
linkset => ennie
channels => 1-31
schannel =>
firstcic => 33
enabled => yes
[link-l3]
linkset => ennie
channels => 1-31
schannel =>
firstcic => 65
enabled => no
[link-l4]
linkset => ennie
channels => 1-31
schannel =>
firstcic => 97
enabled => no
[host-A]
enabled => yes
opc => 998
dpc => ennie:98
links => l1:1
for the slave host B
##wanpipe1.conf
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 15
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 120OH
TE_SIG_MODE = CCS
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
# zaptel.conf
loadzone=uk
defaultzone=uk
span=1,0,0,ccs,hdb3
bchan=1-31
### ss7.conf
[linkset-mahmud]
enabled => yes
use_connect => yes
enable_st => no
hunting_policy => odd_lru
subservice => auto
context = default
[link-l1]
linkset => mahmud
channels => 1-15,17-31
schannel => 16
firstcic => 1
enabled => yes
[link-l2]
linkset => mahmud
channels => 1-31
schannel =>
firstcic => 33
enabled => no
[link-l3]
linkset => mahmud
channels => 1-31
schannel =>
firstcic => 65
enabled => no
[link-l4]
linkset => mahmud
channels => 1-31
schannel =>
firstcic => 97
enabled => no
[host-B]
enabled => yes
opc => 98
dpc => mahmud:998
links => l1:1
Can someone advice on the way forward or has anyone implemented
chan_ss7-1.0.0.
Thanks
Goksie
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
Search
