Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] auto-answer call


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
salah.elharit200 at gm...
Guest
PostPosted: Tue Feb 04, 2014 10:21 am    Post subject: [asterisk-users] auto-answer call Reply with quote
hello list,

i have asterisk 1.4.43 installed and i want to configure the auto-answer


exten => 506,1,SIPAddHeader("Call-Info:\; answer-after=0")
exten => 506,n,Dial(SIP/105)


when i call the 506 the SIP/105 still ringing, i have snom  320 and i have set the Auto Answer Indication: on


i test with Dial and page() but the issue still the same 


any help please   
Back to top
asterisk.org at sedwar...
Guest
PostPosted: Tue Feb 04, 2014 1:27 pm    Post subject: [asterisk-users] auto-answer call Reply with quote
On Tue, 4 Feb 2014, Salaheddine Elharit wrote:

Quote:
i have asterisk 1.4.43 installed and i want to configure the auto-answer

exten => 506,1,SIPAddHeader("Call-Info:\; answer-after=0")

I'm just a 1.2 Luddite...

I have this for a Sipura:

exten = _!.,n,sipaddheader(Call-Info:\;answer-after=0)

Maybe the quotes or the space after the semi-colon?

Maybe wireshark would yield a clue?

--
Thanks in advance,
-------------------------------------------------------------------------
Steve Edwards sedwards@sedwards.com Voice: +1-760-468-3867 PST
Newline Fax: +1-760-731-3000

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
salah.elharit200 at gm...
Guest
PostPosted: Wed Feb 05, 2014 1:20 pm    Post subject: [asterisk-users] auto-answer call Reply with quote
thanks for your response ,

i test this solution but the issue still the same


any other solution
thanks and regards



2014-02-04 Steve Edwards <asterisk.org@sedwards.com (asterisk.org@sedwards.com)>:
Quote:
On Tue, 4 Feb 2014, Salaheddine Elharit wrote:

Quote:
i have asterisk 1.4.43 installed and i want to configure the auto-answer

exten => 506,1,SIPAddHeader("Call-Info:\; answer-after=0")


I'm just a 1.2 Luddite...

I have this for a Sipura:

        exten = _!.,n,sipaddheader(Call-Info:\;answer-after=0)

Maybe the quotes or the space after the semi-colon?

Maybe wireshark would yield a clue?

--
Thanks in advance,
-------------------------------------------------------------------------
Steve Edwards       sedwards@sedwards.com (sedwards@sedwards.com)      Voice: +1-760-468-3867 PST
Newline                                              Fax: +1-760-731-3000

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
asterisk.org at sedwar...
Guest
PostPosted: Wed Feb 05, 2014 2:35 pm    Post subject: [asterisk-users] auto-answer call Reply with quote
Please don't top post.

On Wed, 5 Feb 2014, Salaheddine Elharit wrote:

Quote:
i test this solution but the issue still the same

How does what you see in wireshark compare to what the snom expects?

Can you enable debug/verbose syslogging on the phone to see if it
complains about anything?

--
Thanks in advance,
-------------------------------------------------------------------------
Steve Edwards sedwards@sedwards.com Voice: +1-760-468-3867 PST
Newline Fax: +1-760-731-3000

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
lmoore at omninet.net.au
Guest
PostPosted: Wed Feb 05, 2014 5:48 pm    Post subject: [asterisk-users] auto-answer call Reply with quote
On 6/02/2014 2:21 AM, Salaheddine Elharit wrote:
Quote:
thanks for your response ,

i test this solution but the issue still the same

any other solution
thanks and regards


2014-02-04 Steve Edwards <asterisk.org@sedwards.com
<mailto:asterisk.org@sedwards.com>>:

On Tue, 4 Feb 2014, Salaheddine Elharit wrote:

i have asterisk 1.4.43 installed and i want to configure the
auto-answer

exten => 506,1,SIPAddHeader("Call-Info:__\; answer-after=0")


I'm just a 1.2 Luddite...

I have this for a Sipura:

exten = _!.,n,sipaddheader(Call-Info:\__;answer-after=0)

Maybe the quotes or the space after the semi-colon?

Maybe wireshark would yield a clue?

--
Thanks in advance,

Here is a list of headers used for various vendors, I can't remember
which one is for Polycom.


SIPAddHeader(Alert-Info: Ring Answer);
SIPAddHeader(Alert-Info: Info=Alert-Autoanswer);
SIPAddHeader(Call-Info:\;Answer-After=0);
SIPAddHeader(P-Auto-Answer: normal);
SIPAddHeader(Answer-Mode: Auto);

Larry.

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
salah.elharit200 at gm...
Guest
PostPosted: Thu Feb 06, 2014 10:54 am    Post subject: [asterisk-users] auto-answer call Reply with quote
hi 

when i try to this with page()


exten => 506,1,SIPAddHeader("Call-Info:__\; answer-after=0")
exten => 506,n,page(SIP/105)


CLI>Accepting call from '0661xxxxxx' to '506' on channel 1/13, span 1
    -- Executing [506@default:1] SIPAddHeader("DAHDI/13-1", ""Call-Info:__; answer-after=0"") in new stack
    -- Executing [506@default:2] Page("DAHDI/13-1", "SIP/105") in new stack
    -- Called 105
    -- <DAHDI/13-1> Playing 'beep' (language 'en')
    -- SIP/105-000000c7 is ringing
    -- SIP/105-000000c7 is ringing
    -- SIP/105-000000c7 is ringing
    -- Created MeetMe conference 1023 for conference '1894843837d'
    -- SIP/105-000000c7 is ringing
    -- Span 1: Channel 1/13 got hangup, cause -1
    -- Hungup 'DAHDI/pseudo-358137724'
  == Spawn extension (default, 506, 2) exited non-zero on 'DAHDI/13-1'
    -- Hungup 'DAHDI/13-1'


and the call hungup 


when i use the Dial the sip/105 still ringing


thanks and regards








2014-02-05 Larry Moore <lmoore@omninet.net.au (lmoore@omninet.net.au)>:
Quote:
On 6/02/2014 2:21 AM, Salaheddine Elharit wrote:

Quote:
thanks for your response ,

i test this solution but the issue still the same

any other solution
thanks and regards


2014-02-04 Steve Edwards <asterisk.org@sedwards.com (asterisk.org@sedwards.com)

<mailto:asterisk.org@sedwards.com (asterisk.org@sedwards.com)>>:

    On Tue, 4 Feb 2014, Salaheddine Elharit wrote:

        i have asterisk 1.4.43 installed and i want to configure the
        auto-answer


        exten => 506,1,SIPAddHeader("Call-Info:__\; answer-after=0")


    I'm just a 1.2 Luddite...

    I have this for a Sipura:


             exten = _!.,n,sipaddheader(Call-Info:\__;answer-after=0)

    Maybe the quotes or the space after the semi-colon?

    Maybe wireshark would yield a clue?

    --
    Thanks in advance,


Here is a list of headers used for various vendors, I can't remember which one is for Polycom.


SIPAddHeader(Alert-Info: Ring Answer);
SIPAddHeader(Alert-Info: Info=Alert-Autoanswer);
SIPAddHeader(Call-Info:\;Answer-After=0);
SIPAddHeader(P-Auto-Answer: normal);
SIPAddHeader(Answer-Mode: Auto);

Larry.

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users


Back to top
dan at keshercommunica...
Guest
PostPosted: Wed Feb 12, 2014 6:04 pm    Post subject: [asterisk-users] auto-answer call Reply with quote
<![if !supportLists]>Ø <![endif]>when i use the Dial the sip/105 still ringing


This should help you out….
http://wiki.snom.com/FAQ/How_to_make_Asterisk_send_INVITEs_to_trigger_the_phone_for_Intercom


Dan Journo
Kesher Communications (UK)
www.keshercommunications.com
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services