Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community
 SearchSearch 

[asterisk-users] Cancel a ringing SIP call when the other party disconnect


 
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users
View previous topic :: View next topic  
Author Message
plugworld at micnes.com
Guest





PostPosted: Fri Feb 21, 2014 11:56 am    Post subject: [asterisk-users] Cancel a ringing SIP call when the other pa Reply with quote

Hi,
Here is my scenario.
I have a SIP call between two SIP endpoints. A calls B.
During the ringing, B disconnects (network cable is unplugged).

But A continue ringing forever (until the dial timeout) even if asterisk
detects that B is disconnected with the qualify.

Is there any setup or asterisk configuration I need to enable to have A
close its call ?

Note: when A is already talking with B, the call is hanged up on rtp
timeout. But not during the Ringing phase.

Thanks

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
rnewton at digium.com
Guest





PostPosted: Mon Feb 24, 2014 12:47 pm    Post subject: [asterisk-users] Cancel a ringing SIP call when the other pa Reply with quote

On Fri, Feb 21, 2014 at 10:55 AM, Ruddy Gbaguidi <plugworld@micnes.com> wrote:
Quote:
Hi,
Here is my scenario.
I have a SIP call between two SIP endpoints. A calls B.
During the ringing, B disconnects (network cable is unplugged).

But A continue ringing forever (until the dial timeout) even if asterisk
detects that B is disconnected with the qualify.

Is there any setup or asterisk configuration I need to enable to have A
close its call ?

Note: when A is already talking with B, the call is hanged up on rtp
timeout. But not during the Ringing phase.

I'm not sure it is possible to configure Asterisk to hang up during
the ringing phase when a peer/endpoint becomes unreachable. I don't
see an option or parameter for that behavior.

--
Rusty Newton
Digium, Inc. | Community Support Manager
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
direct: +1 256 428 6200

Check us out at: http://digium.com & http://asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Back to top
Display posts from previous:   
Post new topic   Reply to topic    VoIP Mailing List Archives Forum Index -> Asterisk Users All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

VoiceMeUp - Corporate & Wholesale VoIP Services