VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
tony at softins.co.uk
Guest
|
|
| Back to top |
|
 |
ish at pack-net.co.uk
Guest
|
 Posted: Fri Apr 11, 2014 5:42 am Post subject: [asterisk-users] Asterisk to Microsoft Lync2013? |
 |
|
On 11 April 2014 11:34, Tony Mountifield <tony@softins.co.uk (tony@softins.co.uk)> wrote:
| Quote: | Are they any gotchas to be aware of in getting Asterisk and Lync 2013
talking to each other using SIP? Or is Lync a pretty standard implementation
of SIP?
Cheers
Tony |
You have to use TCP for transport and you need to define the host and port address in your peer config and then secure it with ACL.
Regards
Ish
--
| Quote: | Ishfaq Malik
Department: VOIP Support
Company: Packnet Limited
t: +44 (0)845 004 4994
f: +44 (0)161 660 9825
e: ish@pack-net.co.uk (ish@pack-net.co.uk)
w: http://www.pack-net.co.uk
Registered Address: PACKNET LIMITED, Duplex 2, Ducie House
37 Ducie Street
Manchester, M1 2JW
COMPANY REG NO. 04920552
|
|
|
| Back to top |
|
|
tony at softins.co.uk
Guest
|
| Posted: Fri Apr 11, 2014 6:23 am Post subject: [asterisk-users] Asterisk to Microsoft Lync2013? |
|
|
In article <CAHE6+j31hYcOmyS=kgKv+Ge2p+zr-sgFyN2XcmNpMxEw_hYcsQ@mail.gmail.com>,
Ishfaq Malik <ish@pack-net.co.uk> wrote:
| Quote: | On 11 April 2014 11:34, Tony Mountifield <tony@softins.co.uk> wrote:
| Quote: | Are they any gotchas to be aware of in getting Asterisk and Lync 2013
talking to each other using SIP? Or is Lync a pretty standard
implementation
of SIP?
|
You have to use TCP for transport and you need to define the host and port
address in your peer config and then secure it with ACL.
|
Thanks, Ish. That's a little inconvenient. Does Lync not support standard UDP?
I have two boxes that need to talk to Lync. One is Asterisk 11, which should
pose no problem with TCP, but the other is a legacy Asterisk 1.2 box, which
is UDP only, I believe.
| Quote: | Regards
Ish
--
Ishfaq Malik
Department: VOIP Support
Company: Packnet Limited
|
Cheers
Tony
--
Tony Mountifield
Work: tony@softins.co.uk - http://www.softins.co.uk
Play: tony@mountifield.org - http://tony.mountifield.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
| Back to top |
|
|
tony at softins.co.uk
Guest
|
| Posted: Fri Apr 11, 2014 6:57 am Post subject: [asterisk-users] Asterisk to Microsoft Lync2013? |
|
|
In article <li8jbr$nbk$1@softins.softins.co.uk>,
Tony Mountifield <tony@softins.co.uk> wrote:
| Quote: | In article <CAHE6+j31hYcOmyS=kgKv+Ge2p+zr-sgFyN2XcmNpMxEw_hYcsQ@mail.gmail.com>,
Ishfaq Malik <ish@pack-net.co.uk> wrote:
| Quote: | On 11 April 2014 11:34, Tony Mountifield <tony@softins.co.uk> wrote:
| Quote: | Are they any gotchas to be aware of in getting Asterisk and Lync 2013
talking to each other using SIP? Or is Lync a pretty standard
implementation
of SIP?
|
You have to use TCP for transport and you need to define the host and port
address in your peer config and then secure it with ACL.
|
Thanks, Ish. That's a little inconvenient. Does Lync not support standard UDP?
I have two boxes that need to talk to Lync. One is Asterisk 11, which should
pose no problem with TCP, but the other is a legacy Asterisk 1.2 box, which
is UDP only, I believe.
|
OK, I've found a description of Lync 2013 saying it does not support SIP over UDP,
so have told the customer the 1.2 box will need a full upgrade. Thanks!
Tony
--
Tony Mountifield
Work: tony@softins.co.uk - http://www.softins.co.uk
Play: tony@mountifield.org - http://tony.mountifield.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
| Back to top |
|
|
nyamul at gmail.com
Guest
|
| Posted: Fri Apr 11, 2014 7:02 am Post subject: [asterisk-users] Asterisk to Microsoft Lync2013? |
|
|
Would it not be possible to setup another more recent version of Asterisk to act as a proxy between these boxes?
Regards
HASSAN
On Apr 11, 2014 5:57 PM, "Tony Mountifield" <tony@softins.co.uk (tony@softins.co.uk)> wrote: | Quote: | In article <li8jbr$nbk$1@softins.softins.co.uk (1@softins.softins.co.uk)>,
Tony Mountifield <tony@softins.co.uk (tony@softins.co.uk)> wrote:
| Quote: | In article <CAHE6+j31hYcOmyS=kgKv+Ge2p+zr-sgFyN2XcmNpMxEw_hYcsQ@mail.gmail.com ([email]kgKv%2BGe2p%2Bzr-sgFyN2XcmNpMxEw_hYcsQ@mail.gmail.com[/email])>,
Ishfaq Malik <ish@pack-net.co.uk (ish@pack-net.co.uk)> wrote:
| Quote: | On 11 April 2014 11:34, Tony Mountifield <tony@softins.co.uk (tony@softins.co.uk)> wrote:
| Quote: | Are they any gotchas to be aware of in getting Asterisk and Lync 2013
talking to each other using SIP? Or is Lync a pretty standard
implementation
of SIP?
|
You have to use TCP for transport and you need to define the host and port
address in your peer config and then secure it with ACL.
|
Thanks, Ish. That's a little inconvenient. Does Lync not support standard UDP?
I have two boxes that need to talk to Lync. One is Asterisk 11, which should
pose no problem with TCP, but the other is a legacy Asterisk 1.2 box, which
is UDP only, I believe.
|
OK, I've found a description of Lync 2013 saying it does not support SIP over UDP,
so have told the customer the 1.2 box will need a full upgrade. Thanks!
Tony
--
Tony Mountifield
Work: tony@softins.co.uk (tony@softins.co.uk) - http://www.softins.co.uk
Play: tony@mountifield.org (tony@mountifield.org) - http://tony.mountifield.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
        http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
