VoIP Mailing List Archives

[manouchk at gmail.com]

Hi,

I'm trying to use a mobile phone (ericsson W300i) with asterisk through
bluetooth. After some sutrggling, I foun chan_mobile.

As some one already used this mobile with what result?

I'm considering a simple asterisk system (for home use/test purpose) with :
- one SIP service provider (with link to PSTN)
- one SIP phone (a softphone on the asterisk box)
- one mobilephone (ericsson W300i) let's call it A (for Asterisk)

Mobile A is supposed to be connected to asterisk.

I want to interact with this system with another mobile B. The idea would be
to use free calls between mobile A and B and use the SIP provider
mobile B => ..... => SIP provider (low cost call) to PSTN...

It is not yet very clear what's working here. I think, I was able to call
mobile B :
SIP phone => asterisk => mobile A => mobile B
and the comunication is started between :
SIP phone and mobile B

The other way seems more complicated, as I will need to put a password for
security but when from mobile B (or a regular phone), I call mobile A, I did
not succeed in dialing the password., it looks like nothing is passing by.
Maybe I could spy to listen to what's received by asterisk?

I'm using asterisk and chan_mobile from asterisk retrieve by svn checkout
around 5/1/2008 on a gentoo box. For bluetooth, I have bluez-utils-2.25
bluez-libs-2.25. Should I really update bluez ?
To try to get some more debug information I tried :
core set debug 4

But I didn't get much?

W300i handfreeprofile seems to be on port 4 and it was not detected it was
detected (port=0)

Here are some config I use :


more /etc/bluetooth/hcid.conf

options {
autoinit yes;
security auto
pairing multi;
passkey "XXXX";
pin_helper /etc/bluetooth/pin-helper;
}
device {
name "Asterisk PBX"
class 0x000100;
iscan enable; pscan enable;
lm accept;
lp rswitch,hold,sniff,park;
}


more mobile.conf

[general]
interval=10 ; Number of seconds between trying to connect to devices.

[adapter]
id=intuix
address=00:11:67:2E:B4:XX
[W300i]
address=00:16:B8:5F:C2:XX ; the address of the phone
port=4 ;handfreeprofile ; the rfcomm port number (from mobile search)
;port=5 ;headset profile
context=frommobile
adapter=intuix ; adapter to use
dtmfskip=60
group=1 ; this phone is in channel group 1



more sip.conf

[general]
defaultexpirey=1800
dtmfmode=auto
qualify=yes
context=default
srvlookup=yes

register => _________:***********@freephonie.net
disallow=all
allow=ulaw
allow=alaw ; Allow codecs in order of
allow=ilbc ; preference
allow=gsm
allow=speex

[sip-out]
type=peer
host=freephonie.net
username=XXXXXXXXXX
fromuser=XXXXXXXXX
secret=**********
nat=yes

[sip-in]
type=peer
context=fromsipproxy
host=freephonie.net

[1000]
type=friend
secret=********
qualify=yes ; Qualify peer is not more than 2000 mS away
nat=no ; This phone is not natted
host=dynamic ; This device registers with us
canreinvite=no ; Asterisk by default tries to redirect
context=fromsoftphone
port=5061 ; Uncomment this line if Ekiga and Asterisk are on the same host


more extensions.conf
[globals]
HOMEPHONE=XXXXXXXXX
MOBILEA=Mobile/W300i ;the mobile connected to asterisk
MOBILEB=Mobile/W300i/XXXXXXXXX ;the "remote" mobile
SIPOUT=SIP/sip-out
SOFTPHONE=SIP/1000
TIMEOUT=2

[general]
autofallthrough=yes

[fromsoftphone]
exten => 0,1,Answer()
exten => 0,n,Authenticate(XXXX)
exten => 0,n,Dial(${MOBILEB},30)

[frommobile]
exten => s,1,Answer()
exten => s,n,Authenticate(XXXX)
exten => s,n,Dial(${SOFTPHONE},45)

[fromsipproxy]
exten => s,1,Answer()
exten => s,n,Authenticate(XXXX)
exten => s,n,Dial(${MOBILEB},45)


Hope someone call help a bit!
I'd be gratefull!

By the way is there a list of mobile phone (even if unofficial) know to behave
well with chan_mobile/asterisk ? I heard that ericsson mobile doesn't behave
very well?