VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
gr.sabery at gmail.com
Guest
|
 Posted: Tue Apr 22, 2014 3:29 am Post subject: [asterisk-users] ICE |
 |
|
Hello,
I have an Asterisk server with a public IP address and a bunch of clients. Most of my clients are behind NATs (sometimes two clients are behind the same NAT i.e in the same private network). I want to use ICE so that the clients behind the same NAT can send RTP traffic directly to each other and other clients use Asterisk or a TURN server. I tested a specific scenario using two Linphone 3.7 as clients behind the same NAT but finally traffic ended in Asterisk. I checked the packets; the first client sends its host and server reflexive candidates to Asterisk and Asterisk sends it's public address. Then Asterisk will send it's own address to second client and second client in the final 200 OK SIP only sends it's local address normally without using ICE (ICE is enabled on both clients).
Using ICE for such a purpose is possible at all?
PS: in sip.conf I set directmedia=no and directrtpsetup=no. |
|
| Back to top |
|
 |
jcolp at digium.com
Guest
|
| Posted: Wed Apr 23, 2014 8:33 am Post subject: [asterisk-users] ICE |
|
|
Gholamreza Sabery wrote:
Kia ora,
| Quote: | I have an Asterisk server with a public IP address and a bunch of
clients. Most of my clients are behind NATs (sometimes two clients are
behind the same NAT i.e in the same private network). I want to use ICE
so that the clients behind the same NAT can send RTP traffic directly to
each other and other clients use Asterisk or a TURN server. I tested a
specific scenario using two Linphone 3.7 as clients behind the same NAT
but finally traffic ended in Asterisk. I checked the packets; the first
client sends its host and server reflexive candidates to Asterisk and
Asterisk sends it's public address. Then Asterisk will send it's own
address to second client and second client in the final 200 OK SIP only
sends it's local address normally without using ICE (ICE is enabled on
both clients).
Using ICE for such a purpose is possible at all?
|
Asterisk does not currently support this configuration (specifically
passing through candidates and ICE information like this).
Cheers,
--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
| Back to top |
|
|
gr.sabery at gmail.com
Guest
|
| Posted: Sat Apr 26, 2014 2:18 am Post subject: [asterisk-users] ICE |
|
|
Thx alot. 
On Wed, Apr 23, 2014 at 6:02 PM, Joshua Colp <jcolp@digium.com (jcolp@digium.com)> wrote:
| Quote: | Gholamreza Sabery wrote:
Kia ora,
| Quote: | I have an Asterisk server with a public IP address and a bunch of
clients. Most of my clients are behind NATs (sometimes two clients are
behind the same NAT i.e in the same private network). I want to use ICE
so that the clients behind the same NAT can send RTP traffic directly to
each other and other clients use Asterisk or a TURN server. I tested a
specific scenario using two Linphone 3.7 as clients behind the same NAT
but finally traffic ended in Asterisk. I checked the packets; the first
client sends its host and server reflexive candidates to Asterisk and
Asterisk sends it's public address. Then Asterisk will send it's own
address to second client and second client in the final 200 OK SIP only
sends it's local address normally without using ICE (ICE is enabled on
both clients).
Using ICE for such a purpose is possible at all?
|
Asterisk does not currently support this configuration (specifically passing through candidates and ICE information like this).
Cheers,
--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
|
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
