VoIP Mailing List Archives
Mailing list archives for the VoIP community |
|
| View previous topic :: View next topic |
| Author |
Message |
geisj at pagestation.com
Guest
|
 Posted: Mon Jul 14, 2014 11:42 am Post subject: [asterisk-users] Issue with new Te133 |
 |
|
Have a new TE133 in a dell R320.
dahdi_cfg -vvv shows:
DAHDI Tools Version - 2.9.1
DAHDI Version: 2.9.1
Echo Canceller(s):
Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
Channel 24: D-channel (Default) (Echo Canceler: none) (Slaves: 24)
7 channels to configure.
DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
Not sure why???
system.conf shows:
cat system.conf
loadzone=us
defaultzone=us
span=1,0,0,esf,b8zs
bchan=1-6
dchan=24
echocanceller=mg2,1-6
I installed from source.
I am running asterisk 11.10.0
libpri is 1.4.14
dahdi modules are loaded with lsmod | grep dahdi
lsmod | grep dahdi
dahdi_transcode 6729 1 wctc4xxp
dahdi_voicebus 54866 2 wctdm24xxp,wcte12xp
dahdi 224134 11 dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp,oct612x
crc_ccitt 1717 2 wctdm24xxp,dahdi
Thoughts?
Thanks,
Jerry |
|
| Back to top |
|
 |
sruffell at digium.com
Guest
|
| Posted: Mon Jul 14, 2014 11:48 am Post subject: [asterisk-users] Issue with new Te133 |
|
|
On Mon, Jul 14, 2014 at 12:42:34PM -0400, Jerry Geis wrote:
| Quote: | Have a new TE133 in a dell R320.
dahdi_cfg -vvv shows:
DAHDI Tools Version - 2.9.1
DAHDI Version: 2.9.1
Echo Canceller(s):
Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
Channel 24: D-channel (Default) (Echo Canceler: none) (Slaves: 24)
7 channels to configure.
DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
Not sure why???
system.conf shows:
cat system.conf
loadzone=us
defaultzone=us
span=1,0,0,esf,b8zs
bchan=1-6
dchan=24
echocanceller=mg2,1-6
I installed from source.
I am running asterisk 11.10.0
libpri is 1.4.14
dahdi modules are loaded with lsmod | grep dahdi
lsmod | grep dahdi
dahdi_transcode 6729 1 wctc4xxp
dahdi_voicebus 54866 2 wctdm24xxp,wcte12xp
dahdi 224134 11
dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp,oct612x
crc_ccitt 1717 2 wctdm24xxp,dahdi
|
Looking at the above, it appears you do not have the wcte13xp driver
loaded.
Check your /etc/dahdi/modules file and add a line to load the
wcte13xp driver.
Cheers,
Shaun
--
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users |
|
| Back to top |
|
|
geisj at pagestation.com
Guest
|
| Posted: Mon Jul 14, 2014 12:04 pm Post subject: [asterisk-users] Issue with new Te133 |
|
|
| Quote: | Thanks,
| Quote: | Looking at the above, it appears you do not have the wcte13xp driverloaded.
Check your /etc/dahdi/modules file and add a line to load the wcte13xp driver.Correct, I had copied the OLD configs that did not have the new module.I added like you suggested and off to the races! Jerry |
|
|
|
| Back to top |
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Search
