VoIP Mailing List Archives :: View topic - [asterisk-users] [DAHDI] qozap instead of wcb4xxp

Sponsor: VoiceMeUp - Corporate & Wholesale VoIP Services

VoIP Mailing List Archives
Mailing list archives for the VoIP community

[asterisk-users] [DAHDI] qozap instead of wcb4xxp

VoIP Mailing List Archives Forum Index -> Asterisk Users

View previous topic :: View next topic

Author

Message

simonv4 at gmx.com
Guest

Posted: Thu Aug 21, 2014 10:55 am Post subject: [asterisk-users] [DAHDI] qozap instead of wcb4xxp

Hello,

I have a Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] card which seems to work on 1 machine but not on another. It SHOULD load this driver:

Quote:

dahdi_hardware -v

pci:0000:00:00.0 wcb4xxp+ 1397:08b4 Junghanns QuadBRI ISDN card

Instead of:

Quote:

dahdi_hardware -v

pci:0000:00:00.0 qozap- 1397:08b4 Generic Cologne ISDN card

There is no qozap modul in lib/modules but I tried to blacklist it anyway. The consequences that the card is not working in the second machine with the same dahdi config/kernel:

Sarting background readahead: [ OK ]
Checking for hardware changes [ OK ]
Starting dahdi: Loading DAHDI hardware modules:
wct4xxp: [ OK ]
wcb4xxp: [ OK ]

No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg: DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
[FAILED]
[FAILED]

lspci
=====

0:00.0 Non-VGA unclassified device: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 4000 [disabled] [size=8]
Region 1: Memory at e0200000 (32-bit, non-prefetchable) [disabled] [size=4K]

lsmod
=====
Module Size Used by
bluetooth 53925 2
ipv6 267617 19
xfrm_nalgo 13381 1 ipv6
crypto_api 12609 1 xfrm_nalgo
autofs4 29253 3
i2c_dev 12613 0
i2c_core 23745 1 i2c_dev
lockd 63209 0
sunrpc 145533 2 lockd
wcb4xxp 76708 0
wct4xxp 348896 0
dahdi 196296 4 wcb4xxp,wct4xxp
crc_ccitt 6337 1 dahdi
loop 18889 0
dm_mirror 24521 0
dm_multipath 24909 0
scsi_dh 11713 1 dm_multipath
scsi_mod 142485 1 scsi_dh
parport_pc 29157 0
lp 15849 0
parport 37641 2 parport_pc,lp
pcspkr 7105 0
xennet 29769 0 [permanent]
dm_raid45 67273 0
dm_message 6977 1 dm_raid45
dm_region_hash 15809 1 dm_raid45
dm_log 14657 3 dm_mirror,dm_raid45,dm_region_hash
dm_mod 63225 4 dm_mirror,dm_multipath,dm_raid45,dm_log
dm_mem_cache 9921 1 dm_raid45
xenblk 20149 3
ext3 124873 2
jbd 57065 1 ext3
uhci_hcd 25677 0
ohci_hcd 24937 0
ehci_hcd 34253 0

/etc/init.d/dahdi stop
Unloading DAHDI hardware modules: ERROR: Module dahdi is in use
error
+ /etc/init.d/dahdi start
Loading DAHDI hardware modules:
wct4xxp: [ OK ]
wcb4xxp: [ OK ]

No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg: DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
[FAILED]
/usr/sbin/dahdi_cfg -vvvvvvvv
DAHDI Tools Version - 2.3.0

DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================

SPAN 1: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 3: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 4: CCS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 06)
Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 0 Cool

Channel 09: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 09)
Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
Channel 12: Hardware assisted D-channel (Default) (Echo Canceler: none) (Slaves: 12)

12 channels to configure.

DAHDI_SPANCONFIG failed on span 1: No such device or address (6)

Putting the card to other slot doesn't help. That would be nice if some of the developers of this hardware would be around here.

Thanks!

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

Display posts from previous:

	VoIP Mailing List Archives Forum Index -> Asterisk Users	All times are GMT - 5 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum